Hello, Thanks for your software, it's very good. But i have a problem, i use generic HTTP to send data to Jeedom. Actually, the espeasy send only count. 2016-06-13 14:21:29 Debug 192.168.0.102 kern ESP Unit: 0 : HTTP : closing connection 2016-06-13 14:21:29 Debug 192.168.0.102 kern ESP Unit: 0 : 201...

me, i am interesting to send total and time with rule.

But i don't know, how rules is running for sendhttp

any new about the problem of save total on a reboot ?

Ho, sorry. I understand.

Can you confirm my schema ?



Thanks

I think buy this product 1) TH sensor : http://fr.aliexpress.com/item/BNC-Electrode-Probe-Connector-Hydroponic-for-PH-Aquarium-Controller-Meter-Sensor/32380238251.html?spm=2114.13010208.99999999.267.rkk6nU 2) Module connecor : http://fr.aliexpress.com/item/Liquid-PH-Value-Detection-detect-Sensor-Mod...

thanks, but i don't understand . I can replace 4K7 with 2*10K ? Z1 = 2*10K and Z2 = 10K Vin is your sensor output FS300A : 5V Vout to the GPIO of the ESP where you count the pulses 3.3V GND common ground for all of the circuit Vout = (R2/(R1+R2))*Vin Vout = (10/(10+20))*5 Vout = (10/30)*5 Vout = 0,3...

thanks for your explanation. I have in stock 10k, but not 4.7K. I can buy it. but if : Z1 = 4k7 and Z2 = 10K Vin is your sensor output FS300A : 5V Vout to the GPIO of the ESP where you count the pulses 3.3V GND common ground for all of the circuit Vout = (R2/(R1+R2))*Vin Vout = (10/(10+4.7))*5 Vout ...

thanks for your reply. Can you post me a schema of the divisor ? I have found this : http://fr.aliexpress.com/item/4-channel-IIC-I2C-Logic-Level-Converter-Bi-Directional-Module-5V-to-3-3V/32652402864.html?spm=2114.30011508.8.18.i3mqq8 This module does it work? if not, I have this module in my stock ...

Hello,

I want to realize a PH sensor for my swiming pool.

My first answer is : THe sensor type PH is in ESPeasy ?

can you point me to a compatible sensor?

Thanks

ok so I understand: I can supply the FS300A with Wemos in 5v. But the input pin can only support 3.3V Max. So I have to put a converter for 3.3V max . Tell me if I misunderstood Can you recommend a converter that I can find on eBay or Alibaba to put between the input pin and the yellow cable of the ...

hello, thanks for your reply.

But i don't understand. Why i do use a voltage divider or level converter ?

The wemos has a pin 5 V, it's not good for this sensor ?

Thanks

Hello,

I am newbee on ESPEasy, I just bought 2 mini Wemos.

I wonder if it is compatible with a FS300A?

http://fr.aliexpress.com/item/Free-Ship ... 42021.html

thanks a lot