I will definitely keep one original, but I am going to play around with a second one once it is delivered :) These are so cheap, but they are kind of nice, the buttons have a nice tactile feel to them. My plan is to get a few and spray paint them, think they will look better. I might also use them a...

I should think that I could also tune the remote by altering that resistor value until it is recognised

Thanks Costo I took the remote apart this morning and checked the chip... It is indeed a EV1527. It took me a bit to understand this... I did not click when I was looking at the timings that the debug was giving me the duration for both the highs and lows. I am unused to dealing with this stuff, so ...

Stuntteam wrote:RFlink will have a modification to properly recognize the Digoo..

Cool. I notice a few other "brands" using the same kit...

costo wrote:If RFLink will decode it depends on the timing. This particular protocol seems to have a basic timing of ca. 510uS/bit

RFlink apparently has a problem with such a relatively long timing.

I'm interested from a learning point of view, is the timing a separate thing from the protocol?

Would it not then show up as such?

I could easily work with it in openhab if this was the case

http://img.mysku-st.ru/uploads/images/00/88/20/2016/06/24/534fa2.jpg I can't make out the chip, but I wondered if you might? http://shopper.life/uploads/image/2016/06/30/1907addd46_original.jpg Original source http://shopper.life/radioupravlyaemye-rozetki-digoo-rc-13-dlya-umnogo-doma-9153.html#!pre...

There already are pins broken out for serial on the Arduino D0 and D1 You should be able to connect to them surely? Just be sure to add a signal converter to take the serial lines from 5v to 3.3v. I did read somewhere that the ESP8266 is 5v tolerant (despite the documentation) so you could try witho...

Is there anything else that I can do?

I had a look last night at the debug codes. Here is what I discovered wonder if it helps Code is repeated a different number of times, probably corresponding to the length of the key press The first transmit of the code (the one rflink starts recording about half way in) has looser timings than the ...

The source code is available here http://www.nemcon.nl/blog2/development

Look down the page, about two thirds down.

Thanks for looking

*** Edit as of version R46 this remote is working using RFFind, though it is possible to also perform a very simple hardware mod to get it to recognise http://www.nemcon.nl/blog2/faq#RFFind *** Hi there. Loving this project, successfully taking codes from a weather station, X10RF kit and a chinese k...