Search found 101 matches
- 03 May 2024, 13:27
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 15
- Views: 895
Re: Monitoring health of ESP nodes within rules
@ath thanks for info - I will perform a test after official release will be out.
- 25 Apr 2024, 18:15
- Forum: ESP Easy: Software
- Topic: P2P reliability
- Replies: 23
- Views: 979
Re: P2P reliability
@td-er
sorry - I havent noticed this suggestion in advanced settings. Seems it shall solve my problem. I will perform a test and report.
sorry - I havent noticed this suggestion in advanced settings. Seems it shall solve my problem. I will perform a test and report.
- 25 Apr 2024, 17:56
- Forum: ESP Easy: Software
- Topic: P2P reliability
- Replies: 23
- Views: 979
Re: P2P reliability
please check if using taskvalueset within rules to override value of P2P sensor works. On tasks using "non dummy devices" you get error NOT_A_DUMMY_TASK I was using taskvalueset within rules to set ERROR value in case that temperature sensor Dallas was disconnected and this was not reflect...
- 23 Apr 2024, 09:55
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 15
- Views: 895
Re: Monitoring health of ESP nodes within rules
Node disappears from "node list" in 600seconds (10min) of inactivity.
Based on above rules script if node is disconnected email is sent cca 3 times when node age is btw 300 and 600 seconds. After that node disappear from list (%c_ubuild%(N)=-1) and emails are not send anymore.
Based on above rules script if node is disconnected email is sent cca 3 times when node age is btw 300 and 600 seconds. After that node disappear from list (%c_ubuild%(N)=-1) and emails are not send anymore.
- 22 Apr 2024, 19:51
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 15
- Views: 895
Re: Monitoring health of ESP nodes within rules
Hi @Ath thanks for adding "load" as possible parameter - it can be usefull for monitoring load performance... (not tested yet) Below I am sharing simple rule which is checking presence of all ESP nodes with IDs btw 1..100 - if age it above 300seconds =>mail notification. Nodes not present ...
- 21 Apr 2024, 22:22
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 15
- Views: 895
Re: Monitoring health of ESP nodes within rules
@Ath thanks for your effort. I uploaded ESP_Easy_mega_20240421_normal_ESP32_4M316k_ETH and sucessfully executed basic test. I also implemented node healthcheck with email notification within rules - after some days when I will be sure that everything works as expected I will add code in rules which ...
- 18 Apr 2024, 20:32
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 15
- Views: 895
Re: Monitoring health of ESP nodes within rules
yes, system variables like:
%u_age%(N)
%u_name%(N)
%u_IP%(N)
would be perfect.
Values are available in response to http://localhost/json but I dont know how to get this response and parse it within rules.
%u_age%(N)
%u_name%(N)
%u_IP%(N)
would be perfect.
Values are available in response to http://localhost/json but I dont know how to get this response and parse it within rules.
- 15 Apr 2024, 15:47
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 15
- Views: 895
Re: Monitoring health of ESP nodes within rules
OK, this is one option but I have to modify rules on both sides. Is there a way to use alreasy available info which is distributed with broadcast?
- 15 Apr 2024, 14:53
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 15
- Views: 895
Monitoring health of ESP nodes within rules
Hi, on main page of every ESPEASY node there is a list of other ESP nodes within same network. For every node there is also information about AGE which somehow indicate that node is alive. Is it possible to reference AGE of particular node within rules - eg to implement rule within one node in netwo...
- 06 Mar 2024, 14:56
- Forum: ESP Easy: General Discussion
- Topic: After old firmware Release 147
- Replies: 4
- Views: 2503
Re: After old firmware Release 147
for some old releases including R147 please check https://colandino.nl/espeasy-software-en-flashtool/
my oldest release I used is R108 from 2016
my oldest release I used is R108 from 2016
- 02 Jan 2024, 19:18
- Forum: ESP Easy: Hardware
- Topic: Hardware recommendation for Ethernet
- Replies: 22
- Views: 74891
- 29 Dec 2023, 17:25
- Forum: ESP Easy: Hardware
- Topic: Hardware recommendation for Ethernet
- Replies: 22
- Views: 74891
Re: Hardware recommendation for Ethernet
I just started to use this board https://www.kincony.com/kc868-a8-hardwa ... tails.html in combination with ESPEASY - prebuild BIN which I flashed is ESP_Easy_mega_20231130_normal_ESP32_4M316k.factory.bin.
- 13 Nov 2023, 12:45
- Forum: ESP Easy: Hardware
- Topic: Nice housing or ready made with good WAF
- Replies: 9
- Views: 10197
Re: Nice housing or ready made with good WAF
@vincen
thanks for feedback - I ordered one to try first device with wired ethernet in combination with ESPeasy.
thanks for feedback - I ordered one to try first device with wired ethernet in combination with ESPeasy.
- 13 Nov 2023, 11:27
- Forum: ESP Easy: Hardware
- Topic: Nice housing or ready made with good WAF
- Replies: 9
- Views: 10197
Re: Nice housing or ready made with good WAF
sorry, not same board. I was looking for this board
https://www.kincony.com/kc868-a8-hardwa ... tails.html
https://www.kincony.com/kc868-a8-hardwa ... tails.html
- 13 Nov 2023, 10:35
- Forum: ESP Easy: Hardware
- Topic: Nice housing or ready made with good WAF
- Replies: 9
- Views: 10197
Re: Nice housing or ready made with good WAF
have anybody sucessfully installed ESP32 version of ESPEASY on this board?
This board is interesting for me as "ready made of-the-shelf HW" with digital I/O and wired Ethernet.
This board is interesting for me as "ready made of-the-shelf HW" with digital I/O and wired Ethernet.
- 07 Jul 2022, 16:03
- Forum: ESP Easy: General Discussion
- Topic: fan control 3 wire
- Replies: 8
- Views: 3627
Re: fan control 3 wire
I dont know what type of fan you have.
i posted my experience with Helios fan (room recuperator/heat exchanger). i tested also PC processor fan - they are also PWM controlled from motherboard.
Do you have any documentation of your fan?
i posted my experience with Helios fan (room recuperator/heat exchanger). i tested also PC processor fan - they are also PWM controlled from motherboard.
Do you have any documentation of your fan?
- 07 Jul 2022, 15:01
- Forum: ESP Easy: General Discussion
- Topic: fan control 3 wire
- Replies: 8
- Views: 3627
- 16 May 2022, 22:13
- Forum: ESP Easy: Hardware
- Topic: Off-the-shelf HW with digital inputs
- Replies: 21
- Views: 9632
Re: Off-the-shelf HW with digital inputs
@TD_ER have you been able to prepare special version of BIN which support single core ESP32 or this is planned to be part of next regular release?
- 25 Apr 2022, 21:48
- Forum: ESP Easy: Hardware
- Topic: Off-the-shelf HW with digital inputs
- Replies: 21
- Views: 9632
Re: Off-the-shelf HW with digital inputs
seems that also other Shelly PLUS devices uses ESP32-U4WD chip
https://www.youtube.com/watch?v=eLoOT3mXcMs
https://www.youtube.com/watch?v=eLoOT3mXcMs
- 25 Apr 2022, 16:24
- Forum: ESP Easy: Hardware
- Topic: Off-the-shelf HW with digital inputs
- Replies: 21
- Views: 9632
Re: Off-the-shelf HW with digital inputs
I saw your comments - seems that special version of ESP32 is used.
@TD_ER Do you thing that You can solve this just by creating new version of BIN?
If you will prepare it I can test it imediatelly.
@TD_ER Do you thing that You can solve this just by creating new version of BIN?
If you will prepare it I can test it imediatelly.
- 25 Apr 2022, 15:18
- Forum: ESP Easy: Hardware
- Topic: Off-the-shelf HW with digital inputs
- Replies: 21
- Views: 9632
Re: Off-the-shelf HW with digital inputs
I use flash tool mentioned here (https://espeasy.readthedocs.io/en/lates ... shing.html)
- 25 Apr 2022, 09:48
- Forum: ESP Easy: Hardware
- Topic: Off-the-shelf HW with digital inputs
- Replies: 21
- Views: 9632
Re: Off-the-shelf HW with digital inputs
adding some pictures
- 25 Apr 2022, 09:25
- Forum: ESP Easy: Hardware
- Topic: Off-the-shelf HW with digital inputs
- Replies: 21
- Views: 9632
Re: Off-the-shelf HW with digital inputs
I flashed shelly I4 with above mentioned bin file but after (seem so) successful flashing and reseting device does not establish WIFI AP.
tried multiple times but with no success. Any hints?
tried multiple times but with no success. Any hints?
- 19 Apr 2022, 10:45
- Forum: ESP Easy: Hardware
- Topic: Off-the-shelf HW with digital inputs
- Replies: 21
- Views: 9632
Re: Off-the-shelf HW with digital inputs
Hi, my Shelly i4 was delivered. i tried to setup it to deliver changes on inputs to local MQTT (mosquito) but no sucess.
I decided to flash it with ESPeasy - which precompiled BIN shall I use - is ESP_Easy_mega_20220328_normal_ESP32_4M316k-factory right one?
I decided to flash it with ESPeasy - which precompiled BIN shall I use - is ESP_Easy_mega_20220328_normal_ESP32_4M316k-factory right one?
- 08 Apr 2022, 09:39
- Forum: ESP Easy: Hardware
- Topic: Off-the-shelf HW with digital inputs
- Replies: 21
- Views: 9632
Re: Off-the-shelf HW with digital inputs
I ordered shelly i4
https://shop.shelly.cloud/shelly-plus-i ... automation
product specification confirms that it uses ESP32. When I get it delivered I will report possibility to flash it with ESPEASY.
https://shop.shelly.cloud/shelly-plus-i ... automation
product specification confirms that it uses ESP32. When I get it delivered I will report possibility to flash it with ESPEASY.
- 07 Apr 2022, 08:00
- Forum: ESP Easy: Hardware
- Topic: Off-the-shelf HW with digital inputs
- Replies: 21
- Views: 9632
Re: Off-the-shelf HW with digital inputs
@TDer, thanks for hint. I see that new i4 device seems to be suitable (price around 4EUR/input). Ordered one to check.
@sartam, even-though I am able to build such circuit by my own I rather take a deeper look to the market if something suitable is already available off-the-shelf.
@sartam, even-though I am able to build such circuit by my own I rather take a deeper look to the market if something suitable is already available off-the-shelf.
- 06 Apr 2022, 10:23
- Forum: ESP Easy: Hardware
- Topic: Off-the-shelf HW with digital inputs
- Replies: 21
- Views: 9632
Off-the-shelf HW with digital inputs
Hi, does anybody know for a decent HW with optimal price which have multiple digital INPUT-s (opto isolated) and support (ESP chip onboard) for ESP EASY? There are a lot of PCB boards on Aliexpress which have digital (relay outputs) and ESP chip onboard, but I havent seen any of them with digital in...
- 20 Dec 2021, 10:26
- Forum: ESP Easy: Software
- Topic: Error while reading/writing config.dat in 1051
- Replies: 9
- Views: 11393
Re: Error while reading/writing config.dat in 1051
just to share with community how I solved this problem (if somebody finds this useful) * download current config file in Tools->Settings->Save and rename it to config_original.dat * "shorten" config file (in MacOS i use command split -b 36k config_original.dat config_trimmed.dat - this gen...
- 07 Oct 2021, 13:18
- Forum: ESP Easy: General Discussion
- Topic: Dallas 18B20 - value if sensor not connected
- Replies: 2
- Views: 4419
Re: Dallas 18B20 - value if sensor not connected
correct - if sensor is not connected plugin shall evaluate this as error and set Error State Value.
waiting for ticket resolution.
waiting for ticket resolution.
- 05 Oct 2021, 22:38
- Forum: ESP Easy: General Discussion
- Topic: Dallas 18B20 - value if sensor not connected
- Replies: 2
- Views: 4419
Dallas 18B20 - value if sensor not connected
Hi, I am using 18B20 sensor and task is configured that "Error State Value" parameter is set to 125. What is happening is that if sensor is not connected value of task is not set to 125 but is 0. Statistic on task shows: Address: 28-10-98-23-4f-20-01-c5 [DS18B20] Resolution: 0 Parasite Pow...
- 17 Apr 2021, 20:14
- Forum: ESP Easy: Hardware
- Topic: Controlling 3 Fans with Wemos D1 Mini
- Replies: 4
- Views: 8413
Re: Controlling 3 Fans with Wemos D1 Mini
I have experience with controlling "Single room ventilation unit KWL EC 45" (https://www.heliosventilatoren.de/en/news/news-helios/337-single-room-ventilation-unit-kwl-ec-45) by using ESP8266. Ventilation unit have 3 pons: +12V, GND and PWM. PWM input defines how unit operate: if duty cycl...
- 12 Apr 2021, 13:59
- Forum: ESP Easy: Projects / Applications
- Topic: ESPeasy - plugin for Shutters and Blinds
- Replies: 6
- Views: 12623
Re: ESPeasy - plugin for Shutters and Blinds
limit switches are not "available" for ESPeasy - they just protect roller shutter to prevent physical damage if power supply on motor is connected to motor to long. Implementation shall be based on "roller shutter travel times". I tried to implement logic in rules and actually im...
- 12 Apr 2021, 09:03
- Forum: ESP Easy: Projects / Applications
- Topic: ESPeasy - plugin for Shutters and Blinds
- Replies: 6
- Views: 12623
Re: ESPeasy - plugin for Shutters and Blinds
shutters are controlled by relay (one relay for UP, one for DOWN), motors are AC, motors have build in end switches.
- 11 Apr 2021, 16:47
- Forum: ESP Easy: Projects / Applications
- Topic: ESPeasy - plugin for Shutters and Blinds
- Replies: 6
- Views: 12623
ESPeasy - plugin for Shutters and Blinds
Hi,
just asking if there is any plugin in ESPeasy to offer functionality for controlling Shutters and Blinds like such module in Tasmota.
BR.
just asking if there is any plugin in ESPeasy to offer functionality for controlling Shutters and Blinds like such module in Tasmota.
BR.
- 28 Mar 2021, 15:26
- Forum: ESP Easy: Hardware
- Topic: Sonoff DUAL R3 - ESP32
- Replies: 23
- Views: 28252
Re: Sonoff DUAL R3 - ESP32
seems that:
* CSE7766 is single channel with UART interface
* CSE7761 is dual channel with SPI interface
* CSE7766 is single channel with UART interface
* CSE7761 is dual channel with SPI interface
- 28 Mar 2021, 11:37
- Forum: ESP Easy: Hardware
- Topic: Sonoff DUAL R3 - ESP32
- Replies: 23
- Views: 28252
Re: Sonoff DUAL R3 - ESP32
I connected serial terminal and saw following pattern rolling all the time INIT : Booting version: (ESP32 SDK v3.2.3-14-gd3e562907) 37 : Info : INIT : Free RAM:290120 38 : Info : INIT : Cold Boot - Restart Reason: CPU0: Vbat power on reset CPU1: for APP CPU, reseted by PRO CPU 39 : Info : FS : Mount...
- 27 Mar 2021, 19:21
- Forum: ESP Easy: Hardware
- Topic: Sonoff DUAL R3 - ESP32
- Replies: 23
- Views: 28252
Re: Sonoff DUAL R3 - ESP32
Hi,
I followed instructions above and flashed ESP_Easy_mega_20210223_normal_ESP32_4M316k-factory.bin.
Seems that flashing went OK (similar responses as in instructions).
But after flashing I expected to find wifi network with SSID "ESP Easy" but nothing
I followed instructions above and flashed ESP_Easy_mega_20210223_normal_ESP32_4M316k-factory.bin.
Seems that flashing went OK (similar responses as in instructions).
But after flashing I expected to find wifi network with SSID "ESP Easy" but nothing
- 26 Mar 2021, 11:07
- Forum: ESP Easy: Hardware
- Topic: Sonoff DUAL R3 - ESP32
- Replies: 23
- Views: 28252
Re: Sonoff DUAL R3 - ESP32
not yet, time limitations. Since this is my first ESP32 device I am a bit more careful. First i was checking which predefined bin I will flash first - I decided that this will be ESP_Easy_mega_20210223_normal_ESP32_4M316k.bin. For flasher tool - can I use same flasher tool for ESP32 as for ESP8266 -...
- 18 Mar 2021, 09:01
- Forum: ESP Easy: Projects / Applications
- Topic: 6 times DS18B20
- Replies: 34
- Views: 19448
Re: 6 times DS18B20
@rron, how do you handle case that one sensor is not working? I have one application where I am measuring temperatures with 18b20 and since temperature is critical decision parameter in that application I measure it with 2 sensors. During development I recognized that if sensor gets disconnected the...
- 17 Mar 2021, 13:47
- Forum: ESP Easy: Hardware
- Topic: Sonoff DUAL R3 - ESP32
- Replies: 23
- Views: 28252
Sonoff DUAL R3 - ESP32
Hi, today I received my first Sonoff DUAL R3. I expected that it contains ESP8266 but unfortunately it has ESP32 build in. Do somebody have experience flashing it with ESPeasy? pads for RX, TX, 3.3V and GND are accessible, for GPIO-0 I assume it is connected to build in button but still searching we...
- 17 Mar 2021, 12:26
- Forum: ESP Easy: General Discussion
- Topic: problem establishing P2P networking - resolved
- Replies: 6
- Views: 5918
Re: problem establishing P2P networking - resolved
OK, thanks for explanation and clarification.
I already see some options how to avoid this limitation (source node will in rules explicitly address destination node and set DummyDevice value on destination node based on value on source node)
I already see some options how to avoid this limitation (source node will in rules explicitly address destination node and set DummyDevice value on destination node based on value on source node)
- 16 Mar 2021, 12:45
- Forum: ESP Easy: General Discussion
- Topic: problem establishing P2P networking - resolved
- Replies: 6
- Views: 5918
Re: problem establishing P2P networking - resolved
I changed UDP port to 8266 on all nodes to be aligned. What I see is that DeviceTaskID on source node and DeviceTaskID on destination node have to be same otherwise sharing value over P2P network doesnt work. Since this is limitation (on destination nodes I dont have always same DeviceTaskID free) i...
- 15 Mar 2021, 21:12
- Forum: ESP Easy: General Discussion
- Topic: problem establishing P2P networking - resolved
- Replies: 6
- Views: 5918
Re: problem establishing P2P networking - resolved
I succeded by first removing existing device task for LUX sensor on sending side and then adding device task once again.
After that device task appeared also on remote end.
UDP port number was not changed - so port number have no impact.
After that device task appeared also on remote end.
UDP port number was not changed - so port number have no impact.
- 15 Mar 2021, 16:33
- Forum: ESP Easy: General Discussion
- Topic: problem establishing P2P networking - resolved
- Replies: 6
- Views: 5918
problem establishing P2P networking - resolved
Hi, eventhough I am long time ESPeasy user (started with R120 in mid of 2016) I am now trying to use P2P networking for the first time. I would like to share value from LUX sensor BH1750 on one node to another node. Both nodes are running same version (latest build 20210223). I configured P2P networ...
- 10 Mar 2021, 08:36
- Forum: ESP Easy: Software
- Topic: Error while reading/writing config.dat in 1051
- Replies: 9
- Views: 11393
Re: Error while reading/writing config.dat in 1051
TD-er, another question for explanation - does applying "Factory reset" (and what level) help by "cleaning" fragmented SPIFFS. Asking in order to clarify procedure I have to take in such cases: * download current config file in Tools->Settings->Save * do factory reset in Tools-> ...
- 09 Mar 2021, 23:03
- Forum: ESP Easy: Software
- Topic: Error while reading/writing config.dat in 1051
- Replies: 9
- Views: 11393
Re: Error while reading/writing config.dat in 1051
TD-er, thanks for explanation.
Last time just reflashing version file didnt help. Then I tried to flash blank1M.bin first and then flash it with version file again and now it works. After reflashing I uploaded previous config.
Last time just reflashing version file didnt help. Then I tried to flash blank1M.bin first and then flash it with version file again and now it works. After reflashing I uploaded previous config.
- 09 Mar 2021, 21:34
- Forum: ESP Easy: Software
- Topic: Error while reading/writing config.dat in 1051
- Replies: 9
- Views: 11393
Re: Error while reading/writing config.dat in 1051
sonoff 4CH does not have external flash
- 09 Mar 2021, 20:52
- Forum: ESP Easy: Software
- Topic: Error while reading/writing config.dat in 1051
- Replies: 9
- Views: 11393
Re: Error while reading/writing config.dat in 1051
forgot to add info - ESP version is 20201227.
resetFlashWriteCounter doesnt help.
I can repair problem only by reflashing ESP software on device.
resetFlashWriteCounter doesnt help.
I can repair problem only by reflashing ESP software on device.
- 09 Mar 2021, 20:34
- Forum: ESP Easy: Software
- Topic: Error while reading/writing config.dat in 1051
- Replies: 9
- Views: 11393
Error while reading/writing config.dat in 1051
Hi,
last days I am experiencing error "FS : Error while reading/writing config.dat in 1051" when saving DeviceTask configuration. It wasnt happening before. HW is Sonoff 4CH.
what could be reason?
BRJ.
last days I am experiencing error "FS : Error while reading/writing config.dat in 1051" when saving DeviceTask configuration. It wasnt happening before. HW is Sonoff 4CH.
what could be reason?
BRJ.
- 24 Feb 2021, 18:54
- Forum: ESP Easy: General Discussion
- Topic: UDP and MQTT but with different Intervals?
- Replies: 17
- Views: 8217
Re: UDP and MQTT but with different Intervals?
what about solution to (under Devices) define 2 device tasks, both connected to same ADS HW, but each with different interval and sending data to different controller? above proposal with rules send values only once - I think there is missing code to send data everytime looptimer1 generate event On ...