Hello, Maybe, another way should be to have a "Auto Learn Mode" for any raw data packet. I know there is already the "RfFind" feature, but available only for a couple of protocol known. The idea should be to grab the raw data packets regardless of the protocol. Something like 10;...

This doorbell Avidsen Ref: 102301 is not recognized by rflink. This device uses a select dip switch with 8 values on/off The cpu onboard is M1E G982 Any idea about another compatible protocol ? Is it possible to add manually it with another protocol ?? Below, what I get from RfLink Debug: With switc...

Hi, I still have some devices (doorbell, weather station, ..) not working with rflink, protocol unknown or unrecognized. Is there a way to send custom raw data packet via RFLink ??? With this kind of feature, it should be easy to trigger a device with a unknown protocol (with fixed code). Because I ...

Hi, My remote control (chinese brand) has a PT2262 mcu on board for a door gate, but is not recognized correctly by rflink. There are 4 buttons on the remote control. (UP, DOWN, STOP and another one not used but acts as STOP) That's what I got with rflink in debug mode & rc-switch I confirm that...

Did you received my reply by email ?

Hi, Just a suggestion. Is it possible to send a custom raw packet on air in a next release ? I know the right sentence I have to send for a specific device (protocol not known, not supported), but I'm not able to put it on air via rflink. I have not control or method to manage my trx433 on the rflin...

I can not still use this doorbell yet with rflink and the new release R46 :(( It should be good, if I could save the sentence then rflinf could replay it when needed. Not in learning mode, because I already know the right sentence (pulse lenght & data ) When saved, I should use for example: 10;T...

Hi jobarjo,

Thanks fer your test, but can not tell you more about it, maybe you are right.

Just a suggestion, the first & last pulse could be a long low pulse, no ??

Hi,

The first log is with RFUDEBUG = ON

Second log with RFDEBUG = ON

Don't know what's the difference.

The right pulse sequence is in my second post.
The timing in debug mode is not accuracy.

The right timing is
Short pulse 330us
Long pulse 660us

SIPLEC model LEC155 I give the temp & Humidity but I think this sensor just send the temp. 20;04;DEBUG;Pulses=84;Pulses(uSec)=1500,2040,1440,2040,1440,2040,1410,2040,1440,210,1440,210,1410,2040,1440,210,1440,210,1410,2040,1410,2040,1440,2040,1410,2040,1440,2040,1410,2040,1440,2040,1440,2040,1410...

Hi,

Just to tell you, my remote plugs from SIPLEC are supported as tristate protocol.
I have 1 remote (6 buttons on/off ) and 3 plugs
You could add this brand to the supported device list.


Edit: I also have a weather station from SIPLEC (model LEC155) but not supported yet.

Thanks

After some test, I'm able to ring the chime. But I don't have any idea about the format protocol I have only 1 Transmitter (1 identifier) That's what I get on my scope http://i63.tinypic.com/juvhjo.png http://i64.tinypic.com/2efsux2.png Timing is 330 & 660us With the pulses bellow, the chime rin...

Hi, I have a new wirelless chime from Extel but unfortunately, rflink is not able to decode it. http://www.extelmarket.com/categorie.asp?gamme=6 Below what I got with rflinkloader There is only 1 button on the transmitter The receiver (doorbell) is able to join 6 transmitters with 6 differents songs...