Many thanks for taking time for such a well explained answer !!
I stumbled on the the last link as well.
I wil try your NEC example , hopefully I do not have to find this link with raw codes......
The target is to drive a chinese led string via IR.
Again , many thanks !!!
Frank
Search found 29 matches
- 16 Dec 2017, 22:17
- Forum: ESP Easy: Software
- Topic: IR Transmit
- Replies: 3
- Views: 4020
- 15 Dec 2017, 23:33
- Forum: ESP Easy: Software
- Topic: IR Transmit
- Replies: 3
- Views: 4020
IR Transmit
Guys I am using GIT version: v2.0.0-dev12 and am VERY please with al the new items I found. Many thanks for all the hard work!! I have connected a IR receiver and made it report the received signals to my Domotcz machine. Works perfecty !!! Different buttons generate different output on my domoticz ...
- 17 Oct 2017, 23:07
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2140540
Re: Connecting a TM1637 4-Digit Display
cheers!!!!
Will try this tomorrow.
Frank
Will try this tomorrow.
Frank
- 17 Oct 2017, 16:34
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2140540
Re: Connecting a TM1637 4-Digit Display
You are all GREAT people !
Thanks !
Thanks !
- 17 Oct 2017, 12:19
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2140540
Re: Connecting a TM1637 4-Digit Display
Hey Papperone
First, many thanks for your great work here!!
Do you know, is there a wiki or good place to start to get a plugin compiled in EspEasy ?
I have seen the developers wiki , but nothing on Plugin's
Somehow I can't get started.
Again, many thanks for your work here
Frank
First, many thanks for your great work here!!
Do you know, is there a wiki or good place to start to get a plugin compiled in EspEasy ?
I have seen the developers wiki , but nothing on Plugin's
Somehow I can't get started.
Again, many thanks for your work here
Frank
- 16 Oct 2017, 11:24
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2140540
Re: Connecting a TM1637 4-Digit Display
Guys,
Sorry for the stupid questions....
How do you know how to connect the display ?
Is there a how-to page where I can find how to compile a plugin into easyesp ?
I have the tm1638 ,would that work as well? At least the display?
p.s.
with the zip7 I managed to unpack. THanks !
Frank
Sorry for the stupid questions....
How do you know how to connect the display ?
Is there a how-to page where I can find how to compile a plugin into easyesp ?
I have the tm1638 ,would that work as well? At least the display?
p.s.
with the zip7 I managed to unpack. THanks !
Frank
- 12 Oct 2017, 21:33
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2140540
Re: Connecting a TM1637 4-Digit Display
Ok will try zip7.
Cheers
Cheers
- 12 Oct 2017, 12:19
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2140540
Re: Connecting a TM1637 4-Digit Display
Downloaded ...
I try to open it with WinRar, but it throws an error... How do I uncompress is??
MANY THANKS !!!!
Frank
I try to open it with WinRar, but it throws an error... How do I uncompress is??
MANY THANKS !!!!
Frank
- 10 Oct 2017, 23:08
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2140540
Re: Connecting a TM1637 4-Digit Display
O, that's great! I really want to try it. I must admit that I don't know how to test it though. I know how to flash my unit and how to upgrade to new versions/ test versions of the software, but I have never added a new plugin. I can't find how to do it... Can you tell where to find that? :oops: Sa...
- 04 Oct 2017, 13:19
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2140540
Re: Connecting a TM1637 4-Digit Display
impressive !!! Thanks !!! Can't wait
- 03 Oct 2017, 16:24
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2140540
Re: Connecting a TM1637 4-Digit Display
and you are right too
@Papperone
Can you share anything already ? Can I help ? (coding ? )
Very interested in it
@Papperone
Can you share anything already ? Can I help ? (coding ? )
Very interested in it
- 03 Oct 2017, 16:14
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2140540
Re: Connecting a TM1637 4-Digit Display
Ronald,
just out of interest.. Why do you like to have the C or F ?
Do you live in a multi temperature country? Do they exist? As well. if you do see 60 or 22 you can assume the F or C.
I find it a "waste" of display.. ( no hard feelings please )
Greetings
Frank
just out of interest.. Why do you like to have the C or F ?
Do you live in a multi temperature country? Do they exist? As well. if you do see 60 or 22 you can assume the F or C.
I find it a "waste" of display.. ( no hard feelings please )
Greetings
Frank
- 03 Oct 2017, 10:35
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2140540
Re: Connecting a TM1637 4-Digit Display
Very interesing.
What about displaying a value from any item/count in Domoticz ?
I would love to show my power consumption of the house of the result of my solar system.
Need beta testers ?
What about displaying a value from any item/count in Domoticz ?
I would love to show my power consumption of the house of the result of my solar system.
Need beta testers ?
- 02 Oct 2017, 09:43
- Forum: ESP Easy: Hardware
- Topic: ESP8266 with DHT22: sometimes no values received
- Replies: 16
- Views: 19527
Re: ESP8266 with DHT22: sometimes no values received
Old post new 'results' :-) After having a summer season running error free , last week the sensor did start erroring again #$%#$%@@$# Difference ??? Due to autumn start we turned on heating. The thermostat leads are in the same cable as the DHT22. Apperantly the input of the ESP doesn't like the swi...
- 18 Aug 2017, 23:31
- Forum: ESP Easy: Software
- Topic: Rules Event On and OFF
- Replies: 8
- Views: 8677
Re: Rules Event On and OFF
Ernst I have made this one. Brute force hack, but it works :-) (mind the reboot ) //start the warning signal when we receive a start_warning event: On start_warning do timerSet,1,2 endon //stop the warning signal when we receive a stop_warning event: On stop_warning do reboot endon //create an actua...
- 11 Aug 2017, 14:10
- Forum: ESP Easy: Software
- Topic: Rules Event On and OFF
- Replies: 8
- Views: 8677
Re: Rules Event On and OFF
Hi Ernst, I will test your suggestion, many thanks ! If I send a reboot, it does switch off after all :-) The lighthouse is a plastic tower little over 1 meter hight. I have put an 12v super power led in it. Officially not dimmable but in a short span it does emulate the lighthouse light effect of a...
- 02 Jul 2017, 21:10
- Forum: ESP Easy: Software
- Topic: Rules Event On and OFF
- Replies: 8
- Views: 8677
Re: Rules Event On and OFF
Hemmmmmmm The below code does go on and off with the event on and off url Only difference I see is that the timer is set to 600 instead of 1 sec. Any hints ? ====================== On startw do gpio,13,1 //start watering (open valve) timerSet,1,600 //timer 1 set for 10 minutes endon On stopw do time...
- 02 Jul 2017, 19:51
- Forum: ESP Easy: Software
- Topic: Rules Event On and OFF
- Replies: 8
- Views: 8677
Re: Rules Event On and OFF
Guys Thanks for the quick reply. I cleaned up my test code/rules. And stil having the same issue.. Can start with : http://192.168.1.19/control?cmd=event,vuurtorenaan Can not stop with : http://192.168.1.19/control?cmd=event,vuurtorenuit Would you be so kind to look after it again and advise me why ...
- 02 Jul 2017, 11:39
- Forum: ESP Easy: Software
- Topic: Rules Event On and OFF
- Replies: 8
- Views: 8677
Rules Event On and OFF
Guys, I am stuck in my rules and do not understand where I am going wrong :-( From the page : https://www.letscontrolit.com/wiki/index.php/Tutorial_Rules#Starting.2Fstopping_repeating_timers_with_events I have copied the full script and started to modify it a little. Now the issue I am facing that I...
- 16 Mar 2017, 22:29
- Forum: ESP Easy: Hardware
- Topic: ESP8266 with DHT22: sometimes no values received
- Replies: 16
- Views: 19527
Re: ESP8266 with DHT22: sometimes no values received
Hemmmm
I have used an other power supply which made things worse. Life time is now only 2-3 days where the other one had like a week.
I start playing with the capacitor now.....
I have used an other power supply which made things worse. Life time is now only 2-3 days where the other one had like a week.
I start playing with the capacitor now.....
- 16 Mar 2017, 22:21
- Forum: ESP Easy: Projects / Applications
- Topic: District heating - Reading Kamstrup Multical 401
- Replies: 9
- Views: 18177
Re: District heating - Reading Kamstrup Multical 401
Very interesting sTuff!! THanks for sharing.. 1 single simple question ..... "Normally" the meter is checked once in a year by the provider to be able to send you an invoice. How often do you interrogate the device ? Are you not afraid draining the battery too quickly? Greetings Frank
- 09 Mar 2017, 17:23
- Forum: ESP Easy: Projects / Applications
- Topic: espeasy heat meter (warmtemeter wärmemengenzähler)
- Replies: 3
- Views: 4764
Re: espeasy heat meter (warmtemeter wärmemengenzähler)
The water is ( as mentioned in your topic header ) hot !!
Don't you think the YF-G1 will melt or at least have troubles with the heat?
Don't you think the YF-G1 will melt or at least have troubles with the heat?
- 09 Mar 2017, 17:09
- Forum: ESP Easy: Hardware
- Topic: ESP8266 with DHT22: sometimes no values received
- Replies: 16
- Views: 19527
Re: ESP8266 with DHT22: sometimes no values received
Hey Shardan, ESP is on R120 Powersupply is an phone charger. I will exchange it with the one running error free. I do like the suggestion of the capacitor near the DHT ( 47µF). I assume that one has to go over the power as well? What do you think of the resistor between + and output of the DHT ? Nea...
- 09 Mar 2017, 09:00
- Forum: ESP Easy: Hardware
- Topic: ESP8266 with DHT22: sometimes no values received
- Replies: 16
- Views: 19527
Re: ESP8266 with DHT22: sometimes no values received
Hey guys, Ran into the same issue here. ESP8826 2 x DS18b20 1 x DHT22 Every few days ( 10 or so) the DHT22 does not sent its data and "NAN" is displayed. The both DS18b20 are still working then, its only the DHT22. I found that a simple reboot ( software initiated by the menu) of the ESP d...
- 17 Feb 2017, 17:09
- Forum: ESP Easy: Software
- Topic: Other Wifi AP's visible and reporting on?
- Replies: 4
- Views: 3927
Re: Other Wifi AP's visible and reporting on?
@Paxi
You have understand my question correctly
I will open de Ino's this weekend and see if I can mess them up, was hopeing somebody else already did it...
Will keep you informed.
Frank
You have understand my question correctly
I will open de Ino's this weekend and see if I can mess them up, was hopeing somebody else already did it...
Will keep you informed.
Frank
- 17 Feb 2017, 10:13
- Forum: ESP Easy: Software
- Topic: Other Wifi AP's visible and reporting on?
- Replies: 4
- Views: 3927
Re: Other Wifi AP's visible and reporting on?
Hi costo Thanks for taking the time to reply ! My CAR is an AccessPoint itself. So my home wifi will never register to an other AP :-( When I was browsing in the ESPeasy I clicked on the wifi scan and noticed my car's SSID. So the ESP is capable in keeping the connection to my home wifi ( as I am br...
- 09 Feb 2017, 15:05
- Forum: ESP Easy: Software
- Topic: Other Wifi AP's visible and reporting on?
- Replies: 4
- Views: 3927
Other Wifi AP's visible and reporting on?
Hi My car has ( as already many cars now ) a build in Wifi access point. My ESP in the kitchen is happily connected to my house Wifi and reporting temperature to Domoticz. From my ESP, if I do a 'Wifi Scan' in the tools config screen, I can see my car's Wifi. ( if it is not stolen yet ) I would like...
- 04 Feb 2017, 12:22
- Forum: ESP Easy: Hardware
- Topic: DHT11 not decimal values?
- Replies: 18
- Views: 18514
DHT11 not decimal values?
I have been searching the internet and this forum but can't find the answer. My DHT11 is only showning temperature in full degree's nothing in decimals. So only 20 21 22. Is the sensor not sending it ? Like 19.5 ? Or have I done something wrong. In the ESP it does have decimals 2 defined. many thank...
- 28 Jan 2017, 17:53
- Forum: Introduce yourself
- Topic: Hello from Netherlands
- Replies: 1
- Views: 2794
Hello from Netherlands
Hello from Netherlands Purmerend
I have my domoticz system running for a 2 weeks now and still exploring stuff
Ran into this website and now a proud owner of a Temperature Sensor with my ESP
THanks for a the great work done here!!
Frank
I have my domoticz system running for a 2 weeks now and still exploring stuff
Ran into this website and now a proud owner of a Temperature Sensor with my ESP
THanks for a the great work done here!!
Frank