Search found 44 matches
- 13 Jan 2019, 13:11
- Forum: uPyEasy: General Discussion
- Topic: Future of uPyEasy
- Replies: 7
- Views: 19612
Re: Future of uPyEasy
Oh really good news, thank you for the update !!
- 07 Sep 2018, 12:20
- Forum: ESP Easy: Software
- Topic: Cant connect after update mega-20180822
- Replies: 7
- Views: 6752
Re: Cant connect after update mega-20180822
I was just reading through this thread and in the first post you mention a Wemos D1 mini and now this one. Are there more boards with this problem? No the problem that I found was only this board, was thinking this is a Wemos D1 board (but clearly not), but now I'am 100% sure, where thinking about ...
- 06 Sep 2018, 11:09
- Forum: ESP Easy: Software
- Topic: Cant connect after update mega-20180822
- Replies: 7
- Views: 6752
Re: Cant connect after update mega-20180822
Oh,..Yeah first the latest, found the problem, and worked my way down, as you can see after 16 firmware versions that day, I found out that the problem exist from version mega-20180822. Found the module on the internet back.. NodeMCU V3 Lua WIFI Module ESP8266+Extra Memory 32M Flash USB-Serial CH340...
- 05 Sep 2018, 15:55
- Forum: ESP Easy: Software
- Topic: Cant connect after update mega-20180822
- Replies: 7
- Views: 6752
Re: Cant connect after update mega-20180822
Hmm this looks strange, your DNS is set to 0.0.0.0 and it reports an IP-address, but also stating it is using DHCP. Yes a bit strange but DNS is not used, so should not be a problem, dhcp gives the same IP as the later manual inserted IP address. What was the version used before this one? Version m...
- 04 Sep 2018, 16:35
- Forum: ESP Easy: Software
- Topic: Cant connect after update mega-20180822
- Replies: 7
- Views: 6752
Cant connect after update mega-20180822
Hi, Just wanna inform you that I cannot connect with Wemos D1 Mini after update 20180822, get the error Disconnected! Reason: '(201) No AP found' Connected for 2860 Cant connect to any network, but can scan and see the networks, also the local espconfig network does not show up (APmode) Unit 0 Uptim...
- 27 Aug 2017, 18:28
- Forum: ESP Easy: General Discussion
- Topic: ESP active but webpages not reachable after some time
- Replies: 21
- Views: 20220
Re: ESP active but webpages not reachable after some time
Looks like (not sure) the 1000UF condensator is helping a bit, but the main issue is still there, found more ppl with the same problem. More Info https://github.com/nodemcu/nodemcu-firmware/issues/578 So i guess the issue is only on Nodemcu ? If I ping the ESP the whole day,...the issue is gone, but...
- 21 Aug 2017, 10:46
- Forum: ESP Easy: General Discussion
- Topic: ESP active but webpages not reachable after some time
- Replies: 21
- Views: 20220
Re: ESP active but webpages not reachable after some time
I tried you're solution but no luck,...soldered a 1000UF capacitor between GND and VCC on the header but the issue is still there.
- 08 Aug 2017, 18:16
- Forum: ESP Easy: General Discussion
- Topic: ESP active but webpages not reachable after some time
- Replies: 21
- Views: 20220
Re: ESP active but webpages not reachable after some time
Local Time: 2017-08-08 18:09:07 Free Mem: 22592 (16168 - sendWebPageChunkedData) Start the ping after 5min. Pingen naar 192.168.50.231 met 32 bytes aan gegevens: Antwoord van 192.168.50.199: De doelhost is niet bereikbaar. Antwoord van 192.168.50.199: De doelhost is niet bereikbaar. Antwoord van 192...
- 08 Aug 2017, 17:12
- Forum: ESP Easy: Software
- Topic: Rules not in backup file ?
- Replies: 2
- Views: 2750
Re: Rules not in backup file ?
My bad, did not know was convinced, it was a complete backup.
- 08 Aug 2017, 16:58
- Forum: ESP Easy: Software
- Topic: Rules not in backup file ?
- Replies: 2
- Views: 2750
Rules not in backup file ?
I just restored a ESP from the backup.dat file, everything is in, except the rules, not sure if this is normal, because you can make a manual backup of the rules1.txt (under Tools > Flash > click on rules1.txt to make a backup)
Notifcations, controllers, devices, config, etc are in the backup.
Notifcations, controllers, devices, config, etc are in the backup.
- 01 Aug 2017, 10:11
- Forum: ESP Easy: General Discussion
- Topic: ESP active but webpages not reachable after some time
- Replies: 21
- Views: 20220
Re: ESP active but webpages not reachable after some time
Hehe, now trying youre solution on one ESP, guess this should also work fine.
On System#Boot do
TimerSet,1,7200
endon
On Rules#Timer=1 do
WifiDisconnect
WifiConnect
TimerSet,1,7200
endon
What timer settings value do you use ?
On System#Boot do
TimerSet,1,7200
endon
On Rules#Timer=1 do
WifiDisconnect
WifiConnect
TimerSet,1,7200
endon
What timer settings value do you use ?
- 01 Aug 2017, 06:27
- Forum: ESP Easy: General Discussion
- Topic: ESP active but webpages not reachable after some time
- Replies: 21
- Views: 20220
Re: ESP active but webpages not reachable after some time
Got the same issue here, solved it for now with rebooting the esp every two hours, notice that now, the webserver stays up, the connection solution above was not working because the ESP keeps the wifi connection. Without 2 hours reboot, cannot ping it then anymore, webserver not working, use a fixed...
- 13 Apr 2017, 01:21
- Forum: ESP Easy: Hardware
- Topic: Support for ESP32 - the story so far
- Replies: 29
- Views: 38535
Re: Support for ESP32 - the story so far
In the future if they get cheaper and Arduino core is stable, its a different story. Very true,..that should at least be the base,..but i got the time,..no rush no hurries ;) For me the LAN RJ45 option seems to be the solution, also the bluetooth, usb and micro sd, SSL encryption options might be f...
- 12 Apr 2017, 15:07
- Forum: ESP Easy: Hardware
- Topic: Support for ESP32 - the story so far
- Replies: 29
- Views: 38535
Re: Support for ESP32 - the story so far
What's the current state of ESPEasy on ESP32? Is there a branch for it? No, it will still need some more time, but there is some nice dev on the hardware, the first step ;) https://www.esp32.com/viewtopic.php?t=1149 Not very cheap with 22 euro's, but I guess these prices will drop in time. P.S. wit...
- 01 Mar 2017, 19:58
- Forum: ESP Easy: General Discussion
- Topic: Version 1.1.0-beta6 avaiable
- Replies: 25
- Views: 18520
Re: Version 1.1.0-beta6 avaiable
Thank you,..OTA update its working, so you can update it over the air from 147 to ESPEasy_v2.0.0-dev3_normal_4096
Settings are indeed lost, but you can connect with wifi and put the settings back in.
Settings are indeed lost, but you can connect with wifi and put the settings back in.
- 01 Mar 2017, 18:37
- Forum: ESP Easy: General Discussion
- Topic: Version 1.1.0-beta6 avaiable
- Replies: 25
- Views: 18520
Re: Version 1.1.0-beta6 avaiable
Nice work Edwin, and wonderfull you picked up this great project !!!
Can we use the OTA update to go from version 147 to v2.0.0-dev3 ?
Can we use the OTA update to go from version 147 to v2.0.0-dev3 ?
- 22 Jan 2017, 00:38
- Forum: Experimental
- Topic: PiEasy - porting ESPEasy to Raspberry Pi (Zero)
- Replies: 9
- Views: 13636
Re: PiEasy - porting ESPEasy to Raspberry Pi (Zero)
Why not an easy esp look, for the front end, and simple scripts or programs at the backend ?
Then we would had an easy config webbased tool, for switching, temp, etc on a PI, would be nice to be compatible for the Rasbarry and Orange PI's.
Then we would had an easy config webbased tool, for switching, temp, etc on a PI, would be nice to be compatible for the Rasbarry and Orange PI's.
- 07 Jan 2017, 04:02
- Forum: ESP Easy: General Discussion
- Topic: First attempt to install EasyESP
- Replies: 4
- Views: 6519
Re: First attempt to install EasyESP
I got also the wrong syslog message's, just found out that the syslog UDP port: has to be 0 Jan 7 04:00:49 192.168.50.194 ÿ#001\Ï#0234SÀ¨2Â#001“#000Brievenbus#000#000#000#000#000#000#000#000#000#000#000#000#000#000#000#001#000#000#000 :ÿ?¼)ÿ?Ô#000#000#000Ô#000#000#000#014#002#020@@#000#000#000¼Uÿ?ô...
- 20 Dec 2016, 14:57
- Forum: Experimental
- Topic: PiEasy - porting ESPEasy to Raspberry Pi (Zero)
- Replies: 9
- Views: 13636
Re: PiEasy - porting ESPEasy to Raspberry Pi (Zero)
Lol,..damm,..one dream lessI think this will not work out of the box .... OrangePi and Reasperry Pi using different cores.
And the RasPiArduino has a lot constants / definitions which refer directly to the BCM2835 Chip.
- 19 Dec 2016, 02:36
- Forum: Experimental
- Topic: PiEasy - porting ESPEasy to Raspberry Pi (Zero)
- Replies: 9
- Views: 13636
Re: PiEasy - porting ESPEasy to Raspberry Pi (Zero)
Yep,...that's a very brilliant idea !! Maybe this could also work on the Orange PI family, they have also some nice flavors; $12.63 - H2 - Wifi - 100MB LAN - 512Mb http://www.orangepi.org/orangepizero/ $13.63 - H3 - HDMI - 100MB LAN - 512Mb http://www.orangepi.org/orangepione/ $24.55 - H5 - HDMI - 1...
- 08 Dec 2016, 22:49
- Forum: Experimental
- Topic: Arduino Easy 2560
- Replies: 130
- Views: 194735
Re: Arduino Easy 2560
Use the storage off the SD card not a option ? get more space to work with.
https://startingelectronics.org/tutoria ... eb-server/
In all mine Mega's with shield I got a 8GB sd card, should be enough storage
https://startingelectronics.org/tutoria ... eb-server/
In all mine Mega's with shield I got a 8GB sd card, should be enough storage
- 07 Dec 2016, 16:38
- Forum: ESP Easy: Hardware
- Topic: Support for ESP32 - the story so far
- Replies: 29
- Views: 38535
Re: Support for ESP32 - the story so far
I don´t wanna be the grinch here ;) Haha,...so don't be,...haha, we where talking about the possibility in a few years,...not days or months. And to be honest I have my doubts that ESPEasy can converted easy to the new platform. Its not easy, guess it must be a version that is incompatible with eac...
- 07 Dec 2016, 01:44
- Forum: ESP Easy: Hardware
- Topic: Support for ESP32 - the story so far
- Replies: 29
- Views: 38535
Re: Support for ESP32 - the story so far
Hehe,..I guess the will add full USB support in the next version But its already amazing what they can do with both chips.
Nice overview you have on youre website.
Nice overview you have on youre website.
- 07 Dec 2016, 01:02
- Forum: ESP Easy: Hardware
- Topic: Support for ESP32 - the story so far
- Replies: 29
- Views: 38535
Re: Support for ESP32 - the story so far
Omg this is so nice, just saw also the possibility of USB connections, don't know why we should need that,..only know,..we are using it very hard in a few years, ESP32 with 64GB storage ? Mouse and keyboard ? :mrgreen: Would be very sick in the end to have a ESP32, with gigabit controller and 2TB us...
- 07 Dec 2016, 00:32
- Forum: ESP Easy: Hardware
- Topic: Support for ESP32 - the story so far
- Replies: 29
- Views: 38535
Re: Support for ESP32 - the story so far
ESPEasy + ESP32 with Ethernet port or WiFi is my dream combination. :idea: One probe to rule them all. :) Wow, it has "real" RJ45 LAN 10MB connection support, it looks very ugly at the momemt but after some release versions and some new cheap boards for ebay or ali,....wow very nice, than...
- 06 Dec 2016, 16:40
- Forum: ESP Easy: Hardware
- Topic: Using a S0 port from a kWh meter
- Replies: 32
- Views: 48223
Re: Using a S0 port from a kWh meter
Hehe, ordered the meter yesterday, including the RS485 (CH340) usb dongle, now I only have to wait a "few" days ;) but I was already looking for a good excuse too use a extra ESPEasy Nodemcu setup in my house, now I got only a ESPEasy Nodemcu in production in my mailbox outside :mrgreen: O...
- 05 Dec 2016, 22:04
- Forum: ESP Easy: Hardware
- Topic: Using a S0 port from a kWh meter
- Replies: 32
- Views: 48223
Re: Using a S0 port from a kWh meter
Ok you've convinced me, and put my own promises aside and go for the RS485 route,...lol wrong forum ;) but if I fail in it, (cannot imagine it use Linux now for 19 years) I still can use the S0 option with ESPEasy. Thank you for the clear explanation, I would bought the wrong meter, and now for a fe...
- 05 Dec 2016, 16:30
- Forum: ESP Easy: Hardware
- Topic: Using a S0 port from a kWh meter
- Replies: 32
- Views: 48223
Re: Using a S0 port from a kWh meter
RS485-application is possible with long cable-length I've already a RS485 bus for the moveable camera's and indeed that cable is long > 50M, so that should not be a problem, don't know how stable this solution is because you already mansion, the signal will take a long route, by the USB conversion ...
- 04 Dec 2016, 21:26
- Forum: ESP Easy: Hardware
- Topic: Using a S0 port from a kWh meter
- Replies: 32
- Views: 48223
Re: Using a S0 port from a kWh meter
Why a 'heavy' 100A&MID SDM230? Sounds stupid but the LCD readings are then normal horizontal to read, instead of vertically, don't mind the extra 10$, also it has a dual pulse port, I guess the accuracy of all these devices are the same. Why RS485-interface & Domoticz not an option? Its qui...
- 04 Dec 2016, 15:32
- Forum: ESP Easy: Hardware
- Topic: Using a S0 port from a kWh meter
- Replies: 32
- Views: 48223
Re: Using a S0 port from a kWh meter
I'm fairly new to pulse meeting, I found a nice meter (Eastron SDM230-Pulse) but will it work with ESPEasy ? Or are there better options ? Looking for a cheap and stable solution for the whole house, I'am always using a minimum of 0.1KWH so I guess the resolution of 1000/1KWH is good enough. https:/...
- 24 Nov 2016, 15:43
- Forum: Experimental
- Topic: Arduino Easy 2560
- Replies: 130
- Views: 194735
Re: Arduino Easy 2560
Very very nice,...nice work Martinus !!!!
- 29 Sep 2016, 07:53
- Forum: ESP Easy: Projects / Applications
- Topic: Nodo Small revival project
- Replies: 14
- Views: 16373
Re: Nodo Small revival project
I wonder what happened with all those Nodo users. Did they all move to Domoticz? Some people will still using the webapp, I guess :D but the majority, like me, moved to Domoticz, some bought a crappy expensive system, hehe With all the respect for the people, maybe its a idea to have a sort of poll...
- 28 Sep 2016, 09:41
- Forum: ESP Easy: Projects / Applications
- Topic: Nodo Small revival project
- Replies: 14
- Views: 16373
Re: Nodo Small revival project
i dont know what nodo is Nodo is a great big Arduino project (but it looks at the moment end of life), where you can use different Arduino's, mega, minipro, uno, with several device's, also some RF devices, IR, switches, relays, special nodo shields with IR, RF433, Clock, SPK etc, ethernet shield, ...
- 28 Sep 2016, 00:21
- Forum: ESP Easy: Projects / Applications
- Topic: Nodo Small revival project
- Replies: 14
- Views: 16373
Re: Nodo Small revival project
Why don't we restart the whole nodo project, based on the V3.7 (r744) core and everything in English, and not so based on one person ? I'am not a C++ programmer, but other language is no problem, also maybe thinking to simple, but got allot of time. The "world" should be in our hands :D I ...
- 23 Dec 2015, 03:20
- Forum: ESP Easy: Software
- Topic: MySensors goes ESP!!
- Replies: 91
- Views: 104747
Re: MySensors goes ESP!!
Openhab ? but then again, if I see java, and think about 200+ devices, its the very wrong way, and domoticz writen in C, I guess the right way. "We" can choose here, Mysensors has the support for many controller and protocols, and allot of sensors, so I guess it will save you some time the...
- 07 Dec 2015, 19:33
- Forum: ESP Easy: General Discussion
- Topic: Speaker function ?
- Replies: 35
- Views: 31343
Re: Speaker function ?
Thank you for the lead, http://192.168.50.194/control?cmd=Pulse,14,1,100 did the trick for me, single tone do, but it does the job
With PWM you have to send a off command as well, pulse stops after 100ms, in this case.
With PWM you have to send a off command as well, pulse stops after 100ms, in this case.
- 03 Dec 2015, 16:22
- Forum: ESP Easy: General Discussion
- Topic: Speaker function ?
- Replies: 35
- Views: 31343
Re: Speaker function ?
Yes,..this piezo buzzer (speaker) I mean, is it already working ?
- 02 Dec 2015, 11:29
- Forum: ESP Easy: General Discussion
- Topic: Speaker function ?
- Replies: 35
- Views: 31343
Speaker function ?
Maybe its easy (don't know) to implement to have a speaker function so you get a acknowledge from Domoticz, with some different tones, for different functions.
http://<ESP IP address>/control?cmd=spk,<pin>,1-2-3 etc
http://<ESP IP address>/control?cmd=spk,<pin>,1-2-3 etc
- 21 Nov 2015, 15:34
- Forum: ESP Easy: Software
- Topic: TSOP4838 IR recieve in Domoticz
- Replies: 5
- Views: 9442
Re: IR recieve in Domoticz
I was hoping blocky could do this for us, but if we must use a script for it, I guess its look like; Script name : script_device_ir.lua ------- -- This line must shows up in the Domoticz log without doing anything print('DEBUG LOG : check if C:\\Program Files (x86)\\Domoticz\\scripts\\lua\\script_de...
- 18 Nov 2015, 22:48
- Forum: ESP Easy: Software
- Topic: TSOP4838 IR recieve in Domoticz
- Replies: 5
- Views: 9442
TSOP4838 IR recieve in Domoticz
Maybe someone can confirm this is the right setup for recieving IR codes in Domoticz; Build: 42 Device: Infrared - TSOP4838 Name: (empty) IDX / Var: 5 (in mine case) 1st GPIO: GPIO-14 (in mine case) Pull UP: Yes Inversed: No Value Name 1: IR From my remote control I send "Code a5602e4d" (E...
- 16 Nov 2015, 20:08
- Forum: ESP Easy: Hardware
- Topic: ESP-14 WiFi Module Combines ESP8266 with STM8S MCU
- Replies: 2
- Views: 3901
ESP-14 WiFi Module Combines ESP8266 with STM8S MCU
Maybe interesting ESP-14 WiFi Module Combines ESP8266 with STM8S MCU, I dont see any cheap adapter boards yet, just only some starting at 5$ http://www.aliexpress.com/w/wholesale-esp%25252d14.html?site=nld&groupsort=1&SortType=price_asc&g=y&SearchText=esp-14&initiative_id=SB_2015...
- 16 Nov 2015, 00:12
- Forum: ESP Easy: Software
- Topic: R42 password problem
- Replies: 0
- Views: 2361
R42 password problem
I noticed that R42 is not asking for a password, for the second time. So I can login with a password (so far so good), but on every extra device (phone/tablet) I can entering the device without its asking for a password, you will have to reboot the device before its asking again for a password. Also...
- 01 Nov 2015, 14:49
- Forum: ESP Easy: Hardware
- Topic: support for PCF8574 ?
- Replies: 6
- Views: 5548
Re: support for PCF8574 ?
Thank you for the anwsers, I've allot of the PCF8574, so that's why my question, but as you explained,
I will order the MCP23017 chip, and wait a bit Thanks !!
I will order the MCP23017 chip, and wait a bit Thanks !!
- 01 Nov 2015, 11:08
- Forum: ESP Easy: Hardware
- Topic: support for PCF8574 ?
- Replies: 6
- Views: 5548
support for PCF8574 ?
First of all,..very nice project,..nice work !!
Is the PCF8574 chip supported, or will it be supported in the future ?
And can I use it with a max of 8 chips on the same I2C bus ?
Is the PCF8574 chip supported, or will it be supported in the future ?
And can I use it with a max of 8 chips on the same I2C bus ?