Search found 30 matches
- 31 Mar 2024, 00:36
- Forum: ESP Easy: Software
- Topic: How to set up value open/close
- Replies: 7
- Views: 6474
Re: How to set up value open/close
I finally know why my wife is always angry at me - I think I'm doing it quickly but in real two year passed like a one day :D this code on Door_sensor#State do if %eventvalue%=0 Publish,homedoor_1/Door_sensor/State,CLOSE else Publish,homedoor_1/Door_sensor/State,OPEN endif endon work great. thank Yo...
- 29 Mar 2024, 00:18
- Forum: ESP Easy: Software
- Topic: How to set up value open/close
- Replies: 7
- Views: 6474
Re: How to set up value open/close
after almost one year :oops: i have back to this topic. In link which you posted I found what you meaned. C: 0 => “CLOSE” 1 => “ OPEN” c: 0 => “CLOSED” 1 => “ OPEN” I have been tried something like this: on Door_sensor#State do Publish,homedoor_1,Door_sensor,State,[switch#state#C] endon but in [swit...
- 11 Dec 2023, 00:58
- Forum: ESP Easy: Software
- Topic: Espeasy relay after reboot is on.
- Replies: 3
- Views: 3996
Espeasy relay after reboot is on.
Hello. Using espeasy mega-20231130, I have added devices : Switch and relay and servo. 1) Device config is: Switch input - Switch Name -switch Internal pullup - marked Gpio 12 switch type: switch Switch button type: Push button active low debounce 50ms. 2)Device config is: Switch input - switch Name...
- 10 Dec 2023, 21:49
- Forum: ESP Easy: Projects / Applications
- Topic: Android battery level over mqtt in espeasy.
- Replies: 2
- Views: 4151
Re: Android battery level over mqtt in espeasy.
Thank You for reply, thank You Very much!
I will try in free moment of time.
I will try in free moment of time.
- 08 Dec 2023, 17:45
- Forum: ESP Easy: Projects / Applications
- Topic: Android battery level over mqtt in espeasy.
- Replies: 2
- Views: 4151
Android battery level over mqtt in espeasy.
Hello:) Does somebody tryied reading battery status from phone or tablet ? I want to use old tablet for lcd screen but it will be not offen use and for safety i don't want to have still battery charger connected to it. My idea is to read every 5min battery status and when it will be less than 20% us...
- 15 Aug 2023, 15:32
- Forum: ESP Easy: Software
- Topic: Help with write rules for solar water heater
- Replies: 4
- Views: 856
Re: Help with write rules for solar water heater
Thank you for Your reply. I'am not programmer but learn from materials from youtube and internet and I try to understand your rules. 1. I use only one temperature sensor mounted on solar? 2. where did it came from [Water#temp]- should I create dummy device NAME Water, Values- temp? or add new sensor...
- 15 Aug 2023, 10:56
- Forum: ESP Easy: Software
- Topic: Help with write rules for solar water heater
- Replies: 4
- Views: 856
Help with write rules for solar water heater
Hello. I have write some simple rules to control pump for my diy solar water heater. on Solar1#temp do if [Solar1#temp] > 30 gpio,5,1 //turn on gpio over 30deg endif if [Solar1#temp] < 27 gpio,5,0 //turn off gpio under 27deg endif endon This works but it is inefficient. My idea is to put one more se...
- 02 Nov 2022, 00:19
- Forum: ESP Easy: Software
- Topic: How to enable plugin?
- Replies: 2
- Views: 1347
Re: How to enable plugin?
it worked, thank you for your help.
- 01 Nov 2022, 23:13
- Forum: ESP Easy: Software
- Topic: How to enable plugin?
- Replies: 2
- Views: 1347
How to enable plugin?
Hello, How can I unblock or activate the plugin from the \ ESPEasy_ESP82xx_mega-20220809 \ source \ src folder
I mean the _P072_HDC1080.ino plugin which cannot be seen in devices / device on the configuration page on wemos d1mini ??
I mean the _P072_HDC1080.ino plugin which cannot be seen in devices / device on the configuration page on wemos d1mini ??
- 21 Mar 2022, 22:25
- Forum: ESP Easy: Software
- Topic: How to set up value open/close
- Replies: 7
- Views: 6474
Re: How to set up value open/close
thank You! I will try:)
- 20 Mar 2022, 13:11
- Forum: ESP Easy: Software
- Topic: How to set up value open/close
- Replies: 7
- Views: 6474
How to set up value open/close
Hi. Is it possible using Switch input - Switch to set value Open/Close not 0/1?
I'm trying to do the door lock status sending via mqtt to Nettemp. In nettemp i can receive status open/close.
I'm trying to do the door lock status sending via mqtt to Nettemp. In nettemp i can receive status open/close.
- 23 Dec 2020, 18:21
- Forum: ESP Easy: Projects / Applications
- Topic: 4way valve rules
- Replies: 6
- Views: 12577
Re: 4way valve rules
For 3 days I have been trying to come up with something from this code but unfortunately I can't. I need a hint, not a ready-made solution. Do I need config devices in Devices? I have only 2 devices: oled and ds18b20 named out and values temp What do I understand: On System#Boot do let,1,40 // Setpo...
- 20 Dec 2020, 17:27
- Forum: ESP Easy: Projects / Applications
- Topic: 4way valve rules
- Replies: 6
- Views: 12577
Re: 4way valve rules
Thanks for the code, when I read it it makes sense but it doesn't work. Only after restarting, the esp opens or closes depending on the temperature Code after my modification (correctly set temperature reading and shorter testing time) On System#Boot do let,1,25 // Setpoint low let,2,28 // Setpoint ...
- 16 Dec 2020, 16:26
- Forum: ESP Easy: Projects / Applications
- Topic: 4way valve rules
- Replies: 6
- Views: 12577
4way valve rules
Hello everyone. I have build using espeasy,arduino nano and sg90 servomotor 4way valve controller for my heating. arduino is responsible for servo support. One pin is for open and one is for close. On youtube i found rules for simple thermostat, I set it to my needs and it works great. When heating ...
- 18 May 2019, 11:36
- Forum: ESP Easy: Hardware
- Topic: MPR121 touch sensor
- Replies: 5
- Views: 3940
Re: MPR121 touch sensor
Finally i found some old firmware on my laptop. mega-20180421 in test version there is MPR121 sensor and it work properly.
Only one issue- if we set up this sensor but do not connect it esp will not boot up.
Only one issue- if we set up this sensor but do not connect it esp will not boot up.
- 17 May 2019, 22:54
- Forum: ESP Easy: Hardware
- Topic: MPR121 touch sensor
- Replies: 5
- Views: 3940
Re: MPR121 touch sensor
IC on my board MPR121
IC in espeasy mega-20190511 -TTP229
but Plugin 062: MPR121 KeyPad says it should work properly but i don't see it in devices in espeasy.
IC in espeasy mega-20190511 -TTP229
but Plugin 062: MPR121 KeyPad says it should work properly but i don't see it in devices in espeasy.
- 17 May 2019, 19:48
- Forum: ESP Easy: Hardware
- Topic: MPR121 touch sensor
- Replies: 5
- Views: 3940
MPR121 touch sensor
Hello!
Is this sensor Capacitive Touch Sensor Controller Module I2C keyboard
works with espeasy mega-20190511?
I found some information here and here but can't make it work.
Conneected :
SCL- GPIO12 (D6)
SDO- GPIO13 (D7)
Device- Keypad - TTP229 Touch
Is this sensor Capacitive Touch Sensor Controller Module I2C keyboard
works with espeasy mega-20190511?
I found some information here and here but can't make it work.
Conneected :
SCL- GPIO12 (D6)
SDO- GPIO13 (D7)
Device- Keypad - TTP229 Touch
- 16 Dec 2018, 20:03
- Forum: ESP Easy: Software
- Topic: Sonoff Basic which version ESPEasy?
- Replies: 5
- Views: 3915
Re: Sonoff Basic which version ESPEasy?
Can't you program it with your WiFi credentials instead of using the AP procedure? 4330 : WIFI : Connecting FunBox-8F32 attempt #1 and nothing happens. DONE! (You may disconnect the unit if you want.) ERROR: 0.0.0.0 is unresponsive. Unit number is 0.0.0.0, ping started. (If the post-flash stall, pr...
- 16 Dec 2018, 19:06
- Forum: ESP Easy: Software
- Topic: Sonoff Basic which version ESPEasy?
- Replies: 5
- Views: 3915
Re: Sonoff Basic which version ESPEasy?
yes, i'm using flasher from package with firmware
Now i Checked- when i use NodeMCU flash software and ESPEasy_R120 with SPI mode DOUT - sonoff work ok.
Now i Checked- when i use NodeMCU flash software and ESPEasy_R120 with SPI mode DOUT - sonoff work ok.
- 16 Dec 2018, 18:34
- Forum: ESP Easy: Software
- Topic: Sonoff Basic which version ESPEasy?
- Replies: 5
- Views: 3915
Sonoff Basic which version ESPEasy?
Hello. I have tried all day to program Sonoff Basic espeasy and i could not make it to work. I have version ESP8266EX PN25F08B flash. In arduino says it's Flash ide size: 1048576 Flash ide speed: 40000000 Flash ide mode: DOUT Flash Chip configuration ok. Flash real id: 0014405E Flash real size: 1048...
- 10 Jul 2018, 00:22
- Forum: ESP Easy: Software
- Topic: SolarTracker based on time- my first rules
- Replies: 0
- Views: 1726
SolarTracker based on time- my first rules
Hello. Using this forum and youtube I have been write (my first) some rules to control my water solar panel to trucking the sun. //gpio2- engine speed from East to West //gpio14- engine speed from West to East // on every boot setting solar to East (after reboot encoder state is 0 and we don't know ...
- 02 Jul 2018, 14:04
- Forum: ESP Easy: Software
- Topic: Pulse counter do not send Total and Time
- Replies: 1
- Views: 2094
Pulse counter do not send Total and Time
Hello. using this topic I'm trying to send total and current power usage from my electricity counter to Nettemp monitoring system. Tried using mqtt, generic http advanced and the problem is this same- Sending only first value in my case elec. do not sending total and current. I have tried a few vers...
- 28 Jun 2018, 23:23
- Forum: ESP Easy: Software
- Topic: Double count with pulsecounter, type rising, falling or low not working
- Replies: 21
- Views: 14632
Re: Double count with pulsecounter, type rising, falling or low not working
here is my schematic which I'am testing from three days and it's working very very good. during each rotation of the black bar in front of the sensor led blinks for 40ms. The diode I use only for test - if everything is ok. I do not use it -connect pin7 from lm393 directly to wemos d1mini. Resistor ...
- 08 Apr 2018, 02:57
- Forum: ESP Easy: Hardware
- Topic: Energy meter counter
- Replies: 2
- Views: 3672
Energy meter counter
Hello, for the last few weeks I've been looking for the best readout for an analog electricity meter- and I finally found. It works great. Only problem is -how to connect it to esp? I have two problems: -The output is 4,2v -When detect black line in power meter led diode blink very short. What do Yo...
- 01 Jan 2018, 20:54
- Forum: ESP Easy: Software
- Topic: Simple text after change gpio status
- Replies: 6
- Views: 4533
Re: Simple text after change gpio status
last question. When door change status locked/unlocked controller send two informations from controller publish /%sysname%/%tskname%/%valname% /ESP_Easy/switch/status 0 and door unlocked How to set up to see only door unlocked? edit my bad :twisted: i just erase topic and everything is ok.
- 01 Jan 2018, 20:19
- Forum: ESP Easy: Software
- Topic: Simple text after change gpio status
- Replies: 6
- Views: 4533
Re: Simple text after change gpio status [SOLVED]
I did not think it is so simple :D my all rules on switch#status do if [switch#status]=0 gpio,12,0 endif endon on switch#status do if [switch#status]=1 gpio,12,1 endif endon on switch#status do if [switch#status]=0 Publish door,open endif endon on switch#status do if [switch#status]=1 Publish door,c...
- 01 Jan 2018, 19:47
- Forum: ESP Easy: Software
- Topic: Simple text after change gpio status
- Replies: 6
- Views: 4533
Re: Simple text after change gpio status
ok. I spent all day trying to do something by my self and I am one step ahead. Using switch input and some rules: on wlacznik#status do if [wlacznik#status]=0 gpio,12,0 endif endon on wlacznik#status do if [wlacznik#status]=1 gpio,12,1 endif endon i can send via mqtt door status 0/1 (0-unlocked, 1-l...
- 29 Dec 2017, 22:04
- Forum: ESP Easy: Software
- Topic: Simple text after change gpio status
- Replies: 6
- Views: 4533
Simple text after change gpio status
Hello! How can I send simple text to controller after change gpio status. What i want? see the status of my door key. When door are closed- switch is pushed on (i want to see locked) when door are open switch is pushed off (i want to se unlocked) what funktion should I use? switch? do i need for thi...
- 10 Apr 2017, 11:27
- Forum: ESP Easy: Software
- Topic: Simple rules
- Replies: 2
- Views: 3985
Re: Simple rules
@maluko thank You very much:)
- 09 Apr 2017, 23:38
- Forum: ESP Easy: Software
- Topic: Simple rules
- Replies: 2
- Views: 3985
Simple rules
Hello!
Can i please to write for me simple rules to espeasy that can turn on relay connected to GPIO2 every day at 10am and 10pm for 10s.
Best regards
Can i please to write for me simple rules to espeasy that can turn on relay connected to GPIO2 every day at 10am and 10pm for 10s.
Best regards