Search found 35 matches
- 26 Nov 2018, 16:53
- Forum: ESP Easy: Hardware
- Topic: 2.4ghz triac dimmer
- Replies: 0
- Views: 2496
2.4ghz triac dimmer
Hi everybody, I was searching for a 230Volt dimmer solution and came across this: https://nl.aliexpress.com/item/S1-B-Led-Triac-RF-Dimmer-Controller-gebruik-met-R1-Remote-2-4-ghz-Draadloze-ingang/32903054201.html?albbt=Google_7_shopping&isdl=y&slnk=&albslr=230236530&src=google&ac...
- 16 Feb 2017, 20:36
- Forum: ESP Easy: Hardware
- Topic: DS18B20 Temperature Probe Waterproof Sensors
- Replies: 4
- Views: 4063
Re: DS18B20 Temperature Probe Waterproof Sensors
Yes it is possible https://www.google.nl/imgres?imgurl=https%3A%2F%2Fwww.buyapi.ca%2Fwp-content%2Fuploads%2F2015%2F09%2F1310406-31.jpg&imgrefurl=https%3A%2F%2Fwww.buyapi.ca%2Fproduct%2Fwater-proof-ds18b20-temperature-probe%2F&docid=__8ZR8gwkkq9wM&tbnid=MyYuqhsiHvQZWM%3A&vet=1&w=9...
- 11 Feb 2017, 10:56
- Forum: ESP Easy: Projects / Applications
- Topic: control bulb with push button
- Replies: 11
- Views: 10925
Re: control bulb with push button
You can use this rule to update domoticz and switch local on your esp. On switchon do gpio 12,1 gpio 13,0 inputswitchstate 0,1 endon On switchoff do gpio 12,0 gpio 13,1 inputswitchstate 0,0 endon On Switch1#Switch do if [Switch1#Switch]=1 event switchon else event switchoff endif endon In your esp c...
- 11 Feb 2017, 10:30
- Forum: ESP Easy: Projects / Applications
- Topic: 3d printed RFID alarm unit
- Replies: 0
- Views: 2168
3d printed RFID alarm unit
Here is a alarm that i made and 3d printed with a espeasy. It has room for a Wemosd1 mini, LCD 20x4 and a RDM6300 RFID reader. I included the .stl files so you can print it yourself. Layers 3 infill 70% layer height 0,2mm https://drscdn.500px.org/photo/197824313/m%3D900/62ebde454a1dfc85d767085689cc7...
- 08 Jan 2017, 19:08
- Forum: ESP Easy: Software
- Topic: Sendtohttp - domoticz json
- Replies: 13
- Views: 23424
Re: Sendtohttp - domoticz json
I also have the same problem running R147 On RFID#Tag do if [RFID#Tag]=9235734 SendToHTTP 192.168.1.2:8080/json.htm?type=command¶m=switchlight&idx=89&switchcmd=On Endon Becomes On RFID#Tag do if [RFID#Tag]=9235734 SendToHTTP 192.168.1.2:8080/json.htm?type=command¶m=switchlight&id...
- 12 Dec 2016, 17:17
- Forum: ESP Easy: Software
- Topic: Possible to send temp data with rules?
- Replies: 2
- Views: 2905
Re: Possible to send temp data with rules?
Theanks for your reply.
I allready solved it i used a dedicated esp just for measuring temp and connected the power supply to the pump relay. When the pump goes on esp is powered connects to network and sends data every 10seconds. when the pump is off esp goes off.
Regards Dennis
I allready solved it i used a dedicated esp just for measuring temp and connected the power supply to the pump relay. When the pump goes on esp is powered connects to network and sends data every 10seconds. when the pump is off esp goes off.
Regards Dennis
- 28 Nov 2016, 16:42
- Forum: ESP Easy: Software
- Topic: Possible to send temp data with rules?
- Replies: 2
- Views: 2905
Possible to send temp data with rules?
Hello, I have a jacuzzi with a temp sensor Ds18B20 this sensor is put against the metal heater tube. what i want is to read this data when the pump is running because the tube cools down and then i dont have accurate readings. the jacuzzi filters 2 times a day from 5 to 6 am and from 10 to 11 pm cou...
- 28 May 2016, 20:39
- Forum: ESP Easy: Software
- Topic: Plugin for zero cross detection?
- Replies: 3
- Views: 4288
Re: Plugin for zero cross detection?
Found this on the Internet:
https://youtu.be/QKkx3UjTXco
A zero cross detection 0-3v mains dimmer can be used with the esp8266 maybe worth a try.
https://www.tindie.com/products/nEXT_EV ... r-mpdmv41/
https://youtu.be/QKkx3UjTXco
A zero cross detection 0-3v mains dimmer can be used with the esp8266 maybe worth a try.
https://www.tindie.com/products/nEXT_EV ... r-mpdmv41/
- 29 Dec 2015, 10:00
- Forum: ESP Easy: General Discussion
- Topic: ESP easy reboot
- Replies: 13
- Views: 18030
Re: ESP easy reboot
I had the same issue. Unfortunately no body responded to my latest post http://www.esp8266.nu/forum/viewtopic.p ... 3&start=10
But that should be the solution. I also didn't know that the esp had to connect to a controller. But I missed the tick box send data...
But that should be the solution. I also didn't know that the esp had to connect to a controller. But I missed the tick box send data...
- 23 Dec 2015, 21:56
- Forum: ESP Easy: Hardware
- Topic: Can't get the esp stable
- Replies: 10
- Views: 11586
Re: Can't get the esp stable
I think i found the problem... What i can understand from the log it didnt connect with my Domoticz server. (my server at the moment is my home pc that i shut down at night. because Domoticz is still my test HA because i use the Nodo as main HA) From what i can see in the log the problems of instabi...
- 22 Dec 2015, 10:23
- Forum: ESP Easy: Hardware
- Topic: PCB Idea's...
- Replies: 57
- Views: 45482
Re: PCB Idea's...
I also still use the nodo. i love the simplicity of the espeasy, but the nodo is so stable and versatile i wish it could run with a controller like domoticz and sensors from espeasy. But i never heard heard a thing from Paul do you still have contact with him Martinus?
- 21 Dec 2015, 18:38
- Forum: ESP Easy: Hardware
- Topic: Can't get the esp stable
- Replies: 10
- Views: 11586
Re: Can't get the esp stable
Hello, Can somebody please tell me there exact setup of theRe esp and how it is running stable? My setup: Esp-12e loaded with R052 core 2.0.0 Flashed as nodemcu v1.0 4m (1m spffs) Power supply 12v 2A 220v ac to dc Buck converter 12v to 3.3v capable for 3Amp http://www.tuneupvapes.com/image/cache/dat...
- 19 Dec 2015, 23:03
- Forum: ESP Easy: Hardware
- Topic: ESP-12E not able to memorize WiFi AP data
- Replies: 22
- Views: 19374
Re: ESP-12E not able to memorize WiFi AP data
I also flash the 12E as node mcu v1.0 but what spiffs do you use for the 12E? I use 4m (1m spiffs) could that be the problem for instability
- 19 Dec 2015, 22:56
- Forum: ESP Easy: Projects / Applications
- Topic: Driving Relay using esp8266-01
- Replies: 23
- Views: 20433
Re: Driving Relay using esp8266-01
1) Domoticz: Create a virtual switch in, IDX=250 2) On Action: http://192.168.0.206/control?cmd=gpio2,1 2) Off Action: http://192.168.0.206/control?cmd=gpio2,0 3) ESP: Create a Switch Input on GPIO-0, IDX 250, Push Button Active Low Each time a push the button on the NodeMCU board, the relay toggle...
- 19 Dec 2015, 15:44
- Forum: ESP Easy: Hardware
- Topic: Can't get the esp stable
- Replies: 10
- Views: 11586
Re: Can't get the esp stable
Uploaded r52 2 esp's remain stable now for 17 hrs without any sensor attached. 2 esp's only have a ds18b20 and they don't run stable. Both give same error. If I disconnect the ds18b20 than there is no problem. I also cannot Boot with the ds18b20 attached. Maybe a bug this didn't happen with R48 http...
- 17 Dec 2015, 08:32
- Forum: ESP Easy: Hardware
- Topic: Can't get the esp stable
- Replies: 10
- Views: 11586
Re: Can't get the esp stable
It doesn't make difference if I use gpio12 Esp01 is again unreachable. Also Esp02 without sensors is not reachable. If I disconnect power and power up again there are back online. There also not in ap mode. Maybe in Boot will it help if I pull gpio0 high? Esp01 was online for 5 hours Esp02 was onlin...
- 16 Dec 2015, 13:42
- Forum: ESP Easy: Projects / Applications
- Topic: Driving Relay using esp8266-01
- Replies: 23
- Views: 20433
Re: Driving Relay using esp8266-01
Would it be possible to switch like the mysensors button+relay. It doesn't need to be a toggle switch a momentary push switch would probably easier to program. Also the dimmer+rotary encoder would be a very nice option. I like controlling things with my phone or tablet but a physical button on the w...
- 16 Dec 2015, 10:21
- Forum: ESP Easy: Hardware
- Topic: Can't get the esp stable
- Replies: 10
- Views: 11586
Re: Can't get the esp stable
I used gpio16 for the dallas
I will try gpio12 to see if it makes a difference.
I will try gpio12 to see if it makes a difference.
- 16 Dec 2015, 08:47
- Forum: ESP Easy: Hardware
- Topic: Can't get the esp stable
- Replies: 10
- Views: 11586
Can't get the esp stable
Hello, I have a problem with all my esp units (4 pcs) I run them with R48 and core 2.0.0 When I run the esp's without a sensor for example ds18b20 they run fine without problems. But when I connect a ds18b20 after a few hours the esp is unreachable and I have to disconnect power and then it is up ag...
- 09 Dec 2015, 17:18
- Forum: ESP Easy: Software
- Topic: MySensors goes ESP!!
- Replies: 91
- Views: 104057
Re: MySensors goes ESP!!
That would be great simplicity of espeasy and the fuctions of mysensors. Would be nice if we could use some scripts from mysensors.. for instance the relay+switch and rotary encoder dimmer scripts
- 09 Dec 2015, 17:10
- Forum: ESP Easy: General Discussion
- Topic: Looking for a little guidance on a couple of ESP-01 configurations.
- Replies: 9
- Views: 11008
Re: Looking for a little guidance on a couple of ESP-01 configurations.
Just connect your button between the gpio (of your choice) and ground. Then in the device menu of the Web gui . Choose switch. Enter the gpio that u used and tick the box with pull up. If u now push the button it will connect to ground otherwise it is pulled high by the esp. You can also read this i...
- 07 Dec 2015, 18:15
- Forum: ESP Easy: Projects / Applications
- Topic: Ultimate Switch fgs221 killer
- Replies: 5
- Views: 5615
Re: Ultimate Switch fgs221 killer
Which code did you use from mysensors?
- 03 Dec 2015, 18:33
- Forum: ESP Easy: Projects / Applications
- Topic: Ultimate Switch fgs221 killer
- Replies: 5
- Views: 5615
Re: Ultimate Switch fgs221 killer
I was thinking exactly the same to do this with the livolo touch switch. I made this before with 433mhz a pulse switch and a nodo mini. I think you need some kind of script on esp module. The moderators and old nodo user know what I mean. That would be a wifi switch with feedback instead of the livo...
- 03 Dec 2015, 17:17
- Forum: ESP Easy: Software
- Topic: Plugin for zero cross detection?
- Replies: 3
- Views: 4288
Plugin for zero cross detection?
Would it be possible to detect zero cross from the mains so we can dim 220v lighting with the esp module?
Or would this be more a task for the connexio?
Or would this be more a task for the connexio?
- 02 Dec 2015, 12:39
- Forum: ESP Easy: Hardware
- Topic: TSL2561
- Replies: 4
- Views: 4778
Re: TSL2561
Same here I'm also running the esp 12e module with r039
Sometimes it runs 8 hours and sometimes only 50 minutes. I have to disconnect power and power up again to get it connected to wifi
Sometimes it runs 8 hours and sometimes only 50 minutes. I have to disconnect power and power up again to get it connected to wifi
- 01 Dec 2015, 12:53
- Forum: ESP Easy: Hardware
- Topic: How to connect and upload
- Replies: 30
- Views: 25683
Re: How to connect and upload
Finally got my esp-12e working. The nice chinese who made my breakout boards forgot to connect a trace from the vcc pin to the vcc esp pin :evil: After I found that out uploading went easy. For people that can't upload this is the connection and sequence. Connect pins: Vcc to 3.3v Ch_pd to 3.3v Gpio...
- 27 Nov 2015, 10:43
- Forum: ESP Easy: Hardware
- Topic: How to connect and upload
- Replies: 30
- Views: 25683
Re: How to connect and upload
I think the wiki should be updated with a good tutorial for connecting of different boards there usable gpio's and how the firmware upload sequence works. I had no luck with uploading my esp-12e module but there is also not enough information on the wiki. I know how to use a microcontroller like the...
- 26 Nov 2015, 21:57
- Forum: ESP Easy: Hardware
- Topic: How to connect and upload
- Replies: 30
- Views: 25683
Re: How to connect and upload
With my laptop i dont have the explanation marks but still no luck! same error over and over again. I tried all power supply's i could find, tried 4 different esp modules, 2 different pc's and still nothing. I'm getting a little frustrated by the fact that all pro mini's i have 3.3v and 5v work with...
- 26 Nov 2015, 10:38
- Forum: ESP Easy: Hardware
- Topic: How to connect and upload
- Replies: 30
- Views: 25683
Re: How to connect and upload
I will try it tonight on my old laptop. The 3.2v showing is not accurate because the led voltmeter is not calibrated, on the multimeter I measured 3.34volt the battery can deliver more than enough power. I also tried it with a 5v 2A phone supply but it didn't make a difference. I also tried it with ...
- 25 Nov 2015, 21:23
- Forum: ESP Easy: Hardware
- Topic: How to connect and upload
- Replies: 30
- Views: 25683
Re: How to connect and upload
Do I have to pull gpio2 high?
Some say yes some say it doesn't matter.
Some say yes some say it doesn't matter.
- 25 Nov 2015, 20:33
- Forum: ESP Easy: Hardware
- Topic: How to connect and upload
- Replies: 30
- Views: 25683
Re: How to connect and upload
I already use a separate power supply arduino ide https://www.dropbox.com/s/mpypfr8qpvulmuq/Schermafdruk%202015-11-25%2020.22.04.png?dl=0 battery is used as power supply with a converter 3.3v ams1117 https://www.dropbox.com/s/qmgja1zljldlgni/20151125_202424.jpg?dl=0 https://www.dropbox.com/s/qi5wli3...
- 25 Nov 2015, 10:19
- Forum: ESP Easy: Hardware
- Topic: How to connect and upload
- Replies: 30
- Views: 25683
Re: How to connect and upload
I am using a separate power supply for the esp module with grounds connected between the power supply and serial programmer. The esp module feels like it is working because it gets nice warm (not hot). Gpio15 is allready connected to ground with a 10k resistor on the breakout board. http://tinyurl.c...
- 24 Nov 2015, 23:00
- Forum: ESP Easy: Hardware
- Topic: How to connect and upload
- Replies: 30
- Views: 25683
How to connect and upload
Hello I am trying to upload the espeasy r039 to a esp-12e module but I keep getting a error in the arduino ide. Error: espcom_open failed I am using 1.6.5 And a bare esp module with the white board. Vcc> 3.3v Ch_PD> 3.3v Gnd> gnd Gpio 0> gnd Tx> rx Rx> tx I am using the usb to serial converter and a...
- 20 Nov 2015, 22:55
- Forum: Introduce yourself
- Topic: Hello from the Netherlands
- Replies: 1
- Views: 2347
Hello from the Netherlands
Hello, I am Dennis from the Netherlands. I came across this forum because I use the Nodo domotica system. I still use it and I think it is a great open source system. But since the development stopped I was looking for new implementation. And I think this will work perfect in my nodo system. Thumbs ...
- 19 Nov 2015, 13:00
- Forum: ESP Easy: Hardware
- Topic: Dallas DS18B20 - Values 5 degrees to low ?
- Replies: 7
- Views: 7315
Re: Dallas DS18B20 - Values 5 degrees to low ?
Hello, I used to have some problems with this sensor on a nodo There 2 types of this sensor ds18b20 and the ds1820 the first sensor did work and the 2nd gave wrong values but if it was 5°C I don't know anymore. I ordered both sensors at the same vendor but he randomly sold me the 2 types. So it was ...