Seems this is the solution...
it is confusing, that this parameter is "optional"...
many thanks
karl
Search found 90 matches
- 20 Feb 2022, 17:03
- Forum: ESP Easy: Software
- Topic: Too dumb - switch input
- Replies: 3
- Views: 6182
- 20 Feb 2022, 16:28
- Forum: ESP Easy: Software
- Topic: Too dumb - switch input
- Replies: 3
- Views: 6182
Too dumb - switch input
Hi guys, seems that I fail with one of the simplest tasks. I'd like to connect 2 push buttons on different gpio's 12 and 13. I am using settings as shown in attachment. When I wire ground to gpio 12, nothing happens in status of gpio, same with gpio 13. What do I do wrong with such a simple task? I ...
- 28 Apr 2018, 14:21
- Forum: uPyEasy: General Discussion
- Topic: support of INA219 and ADS1115
- Replies: 18
- Views: 30533
Re: support of INA219 and ADS1115
I assume sample rate is set by default?
I don’t mind, I’m happy with a value every second... as i send it from esp to nodered via mqtt, it doesn’t matter.
Regards
Karl
But support of INA219 would make me happy on esp32 still
I don’t mind, I’m happy with a value every second... as i send it from esp to nodered via mqtt, it doesn’t matter.
Regards
Karl
But support of INA219 would make me happy on esp32 still
- 25 Apr 2018, 13:10
- Forum: uPyEasy: General Discussion
- Topic: support of INA219 and ADS1115
- Replies: 18
- Views: 30533
Re: support of INA219 and ADS1115
Hahahahahahahaha, you are funny. I‘d rather climb the mounteverest as I do the programming of a plugin
- 24 Apr 2018, 11:28
- Forum: uPyEasy: General Discussion
- Topic: support of INA219 and ADS1115
- Replies: 18
- Views: 30533
Re: support of INA219 and ADS1115
Maybe I‘m too dumb for that. I checked the espeasy wiki on the mcp23017 https://www.letscontrolit.com/wiki/index.php/MCP23017 How the hell can I read analog values via the mcp23017 when a ltc2499 is connected to it. I would use udp as a protocoll for sending data. In that case, following schematics ...
- 23 Apr 2018, 22:38
- Forum: uPyEasy: General Discussion
- Topic: support of INA219 and ADS1115
- Replies: 18
- Views: 30533
Re: support of INA219 and ADS1115
Oh
Thx for that!
Thx for that!
- 20 Apr 2018, 20:20
- Forum: uPyEasy: General Discussion
- Topic: support of INA219 and ADS1115
- Replies: 18
- Views: 30533
Re: support of INA219 and ADS1115
But is the LTC2499 supported by espeasy? Haven’t seen that in the wiki...
- 20 Apr 2018, 11:49
- Forum: uPyEasy: General Discussion
- Topic: support of INA219 and ADS1115
- Replies: 18
- Views: 30533
Re: support of INA219 and ADS1115
But is the ltc2499 supported by espeasy either...?
Ltc2499 is really cool but it also lacking in nodered support...
Reards
Karl
Ltc2499 is really cool but it also lacking in nodered support...
Reards
Karl
- 18 Apr 2018, 10:51
- Forum: uPyEasy: General Discussion
- Topic: support of INA219 and ADS1115
- Replies: 18
- Views: 30533
Re: support of INA219 and ADS1115
Hi lisa, Thx for your input! I am thinking of an application where I need more than 16 adc‘s but I can split up in two or more esp32. Sorry for the dumb question but How do I get upyeasy running with those libs? Just copy paste (to where) or do I have to compile something (which I’m not capable of :...
- 18 Apr 2018, 07:55
- Forum: ESP Easy: Projects / Applications
- Topic: Measure Voltage - galvanically separated
- Replies: 2
- Views: 3355
Re: Measure Voltage - galvanically separated
sorry, i totally missed your post!
i wonder whether there isn’t a circuit which does exactly that....
i wonder whether there isn’t a circuit which does exactly that....
- 31 Mar 2018, 13:00
- Forum: uPyEasy: General Discussion
- Topic: support of INA219 and ADS1115
- Replies: 18
- Views: 30533
- 31 Mar 2018, 10:52
- Forum: uPyEasy: General Discussion
- Topic: support of INA219 and ADS1115
- Replies: 18
- Views: 30533
Re: support of INA219 and ADS1115
hi
You are talking just about the multiplexer...
isn’t upyeasy different to espeasy in general?
Regards
Karl
You are talking just about the multiplexer...
isn’t upyeasy different to espeasy in general?
Regards
Karl
- 31 Mar 2018, 08:05
- Forum: uPyEasy: General Discussion
- Topic: support of INA219 and ADS1115
- Replies: 18
- Views: 30533
Re: support of INA219 and ADS1115
Hi,
I have no clue how to get these sensors supported... can anyone help?
regards
karl
I have no clue how to get these sensors supported... can anyone help?
regards
karl
- 26 Mar 2018, 10:05
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
Generally yes, i do most of stuff with fixed ip but i can do it via fixing on router level as well...
Regards
Karl
Regards
Karl
- 26 Mar 2018, 08:28
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
- 26 Mar 2018, 06:34
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
Hi
Ssid and pw do have the right values, but i can’t enter values in ip settings field, they are greyed out...
Ssid and pw do have the right values, but i can’t enter values in ip settings field, they are greyed out...
- 25 Mar 2018, 21:55
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
It is not possible to set IP Settings in Config tab. Can this somehow be changed.
regards
karl
regards
karl
- 25 Mar 2018, 21:53
- Forum: uPyEasy: General Discussion
- Topic: support of INA219 and ADS1115
- Replies: 18
- Views: 30533
support of INA219 and ADS1115
Hi, 1. for one of my projects I would need support of INA219 (voltage and current) as well as ADS1115 (ADC). 2. As the ADS1115 is limited on 4 addresses it also would be helpful if i could Setup 2 or 3 separate i2c Interfaces instead of just one - is this anyhow possible. It would make life easier, ...
- 25 Mar 2018, 21:48
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
Yeah, I have a running esp32!!!!! :D :D :D Here are the steps that got my esp32 up and running: press RST button before plugging in usb Cmd window: esptool.py --port COM4 erase_flash esp32>esptool.py --port COM4 write_flash --compress 0x1000 upyeasy_v021_20180325_test_esp32_4096.bin putty: import up...
- 25 Mar 2018, 20:28
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
Can you pls post your steps to success
- 25 Mar 2018, 10:53
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
hi, i have tried on both platforms but was not able to get it running. I have no clue to identify why it doesn't work. Installation of firmware obviously worked but I can't reach it via browser. I am concerned by the last line of the protocol (see below): 2000-01-01 00:02:24 [debug] uPyEasy-uPyEasy...
- 24 Mar 2018, 22:54
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
hi, i have tried on both platforms but was not able to get it running. I have no clue to identify why it doesn't work. Installation of firmware obviously worked but I can't reach it via browser. I am concerned by the last line of the protocol (see below): ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RES...
- 23 Mar 2018, 22:09
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
I tried both files on my second board, an esp32 wroom NODEMCU ESP-32S V1 as well, but didn't work either...
- 23 Mar 2018, 21:39
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
I erased, then flashed with 2048 but no success.... :cry: E:\esp32>esptool.py --port COM7 erase_flash esptool.py v2.3.2-dev Connecting........_ Detecting chip type... ESP32 Chip is ESP32D0WDQ6 (revision 1) Features: WiFi, BT, Dual Core Uploading stub... Running stub... Stub running... Erasing flash ...
- 23 Mar 2018, 20:27
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
@karl222 @bertb The errors in your log: File "flashbdev.py", line 13, in readblocks OSError: [Errno 5] EIO means that the flashdrive could not be initialized, so that the database isn't build (no dir) and upyeasy fails. Did you flash the 2048 or the 4096 version? hi, have tried it with bo...
- 22 Mar 2018, 22:43
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
Hello, Lisa :) The connection to my router is successful, but when i make request to 192.168.100.3 from my browser it tells me that is unable to connect. This is what I got: I've got ping to 192.168.100.3, but seems web server isn't working. What I'm missing? It's working, cool! The webserver doesn...
- 22 Mar 2018, 22:42
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
yep, Installation was successful: ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x33 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0018,len:4 load:0x3fff001c,len:4364 load:0x40078000,len:...
- 22 Mar 2018, 08:30
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
uiuiui, still a long way to go...
i’ll give it a try in the evening....
karl
i’ll give it a try in the evening....
karl
- 20 Mar 2018, 22:47
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
it does not go, thats the problem
- 20 Mar 2018, 21:07
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
aaaaargh, bootloop.... damn! rst:0x10 (RTCWDT_RTC_RESET),boot:0x33 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3f400020,len:429240 ets Jun 8 2016 00:22:57 rst:0x10 (RTCWDT_RTC_RESET),boot:0x33 (SP...
- 20 Mar 2018, 21:06
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
Breakthrough! googling here and googling there... you have to press the boot button before you plug the esp32 in to usb and Keep it pressed. then start Flash sequence and tataaaaa, flashing runs through easily E:\esp32>esptool.py --chip esp32 --port COM7 --baud 115200 write_flash --flash_freq 40m --...
- 20 Mar 2018, 20:56
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
- 20 Mar 2018, 20:49
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
still no success: E:\esp32>esptool.py --chip esp32 --port COM7 --baud 115200 write_flash --flash_freq 40m --flash_mode dio -z 0x1000 upyeasy_v021_20180218_test_esp32_2048.bin esptool.py v2.3.2-dev Connecting........_____....._____....._____....._____....._____....._____....._____....._____....._____...
- 20 Mar 2018, 20:44
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
several attempts, no success:
bullshit, had not plugged in usb cable (but just this time)... will Report shortly...
bullshit, had not plugged in usb cable (but just this time)... will Report shortly...
- 20 Mar 2018, 20:12
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135253
Re: STM32 boards
No, wasn’t successful either. I don’t have mr gadgets goggles to see through wires
I did my next (unsuccessful) attempt with esp32 wrover, which I received today...
Maybe you can have a look on my thread in esp32 section...
Don’t give up, don’t give up, don’t give up, ...
I did my next (unsuccessful) attempt with esp32 wrover, which I received today...
Maybe you can have a look on my thread in esp32 section...
Don’t give up, don’t give up, don’t give up, ...
- 20 Mar 2018, 19:30
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135253
Re: STM32 boards
Andrew, don't give up, we'll get there
- 20 Mar 2018, 17:47
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
I am coming closer ;-) btw. I have received an esp32 wrover module now and tried to test it I've tried this but it doesn't work: E:\esp32>esptool.py --chip esp32 --port COM7 --baud 460800 write_flash --flash_freq 40m --flash_mode dio -z 0x1000 upyeasy_v021_20180318_test_esp32_4096.bin can you please...
- 20 Mar 2018, 11:27
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
For me it’s a bit too technical. My knowledge is exhausted with cop/paste of instructions...
@abert: can you please share the .bin file...
Thx
Karl
@abert: can you please share the .bin file...
Thx
Karl
- 19 Mar 2018, 19:54
- Forum: ESP Easy: Projects / Applications
- Topic: Measure Voltage - galvanically separated
- Replies: 2
- Views: 3355
Measure Voltage - galvanically separated
Hi, I have to measure individual voltages in a 14 in series battery pack and - of course - it has to be galvanially separated. Each pack has a voltage range of 2.5V up to 4.3V which adds up to +55V. With 14 devices in espeasy I will reach its limitations, so I hope that upyeasy will be my solution w...
- 19 Mar 2018, 11:16
- Forum: uPyEasy: Hardware
- Topic: ESP8266 boards
- Replies: 4
- Views: 14178
- 18 Mar 2018, 22:52
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135253
Re: STM32 boards
Hi, I am not born for this... 1. I installed WinUSB via Zadig which works now. 2. I downloaded dfu-util. I have to use the win32 Version. When I doubleclick on dfu-util.exe a black cmd-window appears and disappeary shortly after and that's it. or is it intended to use REPL commands first. This is no...
- 18 Mar 2018, 21:45
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
Bingo, I do have the DOIT DEVKIT V1 ESP32 module with WROOM32. I just tried to flash it with the 4MB firmware and it doesn't work either
Now I am going to try the stm32 module. Last time I had Trouble to wire up the Ethernet module but got some hints.
reagards
karl
Now I am going to try the stm32 module. Last time I had Trouble to wire up the Ethernet module but got some hints.
reagards
karl
- 18 Mar 2018, 19:46
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
I am using this esp32 board https://www.aliexpress.com/item/Wireless-module-NodeMcu-Lua-WIFI-Internet-of-Things-development-board-based-ESP8266-CP2102-with-pcb-Antenna/32812196746.html?spm=a2g0s.9042311.0.0.gYWUKY it is an esp32 wroom. I will give it a try with the 4MB version. I'll keep you posted ...
- 18 Mar 2018, 16:19
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
Me too
- 17 Mar 2018, 20:07
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
I am getting permanent reboots...
I am using an esp32 wroom module and no wrover, can this be a reason?
Regards
Karl
I am using an esp32 wroom module and no wrover, can this be a reason?
Regards
Karl
- 16 Mar 2018, 20:03
- Forum: uPyEasy: Hardware
- Topic: ESP8266 boards
- Replies: 4
- Views: 14178
Re: ESP8266 boards
Can i use same installing procedure as for the esp32?
I would love to get at least one hardware piece running...
I would love to get at least one hardware piece running...
- 16 Mar 2018, 20:00
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135253
- 15 Mar 2018, 16:02
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135253
Re: STM32 boards
Firmware status: Beta Firmware version: v0.2.0 For the PyBv3 with STM32F405 board: BOM (Bill Of Materials): STM32F405RGT6 pyboard: https://www.aliexpress.com/item/STM32-STM32F405RGT6-Core-Board-For-MicroPython-Development-Board-for-Circuit-Pyboard-Python-Module-STM32F405-with-Full/32805371346.html ...
- 15 Mar 2018, 15:09
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy v0.2.1 released
- Replies: 2
- Views: 12944
Re: uPyEasy v0.2.1 released
any Progress on that...? I am still experiencing this issue... ongoing reboots.
btw. i am using an esp-wroom 32 module
regards
karl
btw. i am using an esp-wroom 32 module
regards
karl
- 14 Mar 2018, 21:59
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 477828
Re: ESP32 boards
I've got it running by using this string, which I found after searching through the thread:
E:\>esptool.py -p COM4 --baud 115200 write_flash --compress 0x1000 upyeasy_v021_20180218_test_esp32_2048.bin
E:\>esptool.py -p COM4 --baud 115200 write_flash --compress 0x1000 upyeasy_v021_20180218_test_esp32_2048.bin