Search found 8643 matches
- 28 Mar 2024, 09:58
- Forum: ESP Easy: General Discussion
- Topic: ping a device problem
- Replies: 1
- Views: 4
Re: ping a device problem
First things that pop up in my head: - All on the same subnet? - Subnet mask correct? - Can both ESPs (the one sending ping and the one being pinged) be reached via ping from another PC in the same subnet? - Both ESPs connected to the same AP/SSID? For example on a typical "guest" network,...
- 27 Mar 2024, 23:28
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 35
- Views: 418
Re: Counting time, calculate and display?
Don't get me wrong, I would love to have been able to help you.
I simply didn't have the time yet to start my FreeCAD learning curve as I also like to use open/free software.
Right now I still draw my 3D designs in TinkerCAD.
I simply didn't have the time yet to start my FreeCAD learning curve as I also like to use open/free software.
Right now I still draw my 3D designs in TinkerCAD.
- 27 Mar 2024, 15:25
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 35
- Views: 418
Re: Counting time, calculate and display?
Well I can't help you there as I'm not familiar with Freecad myself.
- 27 Mar 2024, 13:42
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 35
- Views: 418
Re: Counting time, calculate and display?
You can do it in the latest Prusa Slicer.
This also can export to various 3D formats, so you don't need to print with it.
This also can export to various 3D formats, so you don't need to print with it.
- 27 Mar 2024, 09:16
- Forum: ESP Easy: Projects / Applications
- Topic: KY-037 KY-038 sound sensor for traffic counting
- Replies: 5
- Views: 75
Re: KY-037 KY-038 sound sensor for traffic counting
Maybe you can use one of those 'radar' sensors like the LD2401.
Those do also react to humans, but maybe you can set some thresholds based on measured distance?
Not sure how fast the cars drive by, so it might not respond fast enough as those are typically designed for detecting humans/animals.
Those do also react to humans, but maybe you can set some thresholds based on measured distance?
Not sure how fast the cars drive by, so it might not respond fast enough as those are typically designed for detecting humans/animals.
- 26 Mar 2024, 17:14
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 35
- Views: 418
Re: Counting time, calculate and display?
Yep, you can just schedule a looptimer via the rules to turn on/off a running (repeating) longpulse command.
In this periodical timer event you can check the fix status. If it has a fix you can be sure the received time is also correct.
But there are lots of ways to achieve the same.![Lach :)](./images/smilies/icon_e_smile.gif)
In this periodical timer event you can check the fix status. If it has a fix you can be sure the received time is also correct.
But there are lots of ways to achieve the same.
![Lach :)](./images/smilies/icon_e_smile.gif)
- 26 Mar 2024, 09:09
- Forum: ESP Easy: General Discussion
- Topic: Plugin 64, APDS 9960, which "Collection"?
- Replies: 8
- Views: 89
Re: Plugin 64, APDS 9960, which "Collection"?
It can, but if it is powered from a different power supply, it can also damage your ESP or your I2C sensor.
- 26 Mar 2024, 09:08
- Forum: ESP Easy: General Discussion
- Topic: Improving WEMOS D1 Mini WiFi tip
- Replies: 1
- Views: 28
Re: Improving WEMOS D1 Mini WiFi tip
Yep, also the "polarity" of the antenna can make a huge difference. So try rotating the board to see which is best. Not only metal will greatly impact WiFi performance. Water does too, so holding it in your hand does also make a difference. And some plastics also affect the resonance frequ...
- 26 Mar 2024, 08:50
- Forum: ESP Easy: Software
- Topic: Value checking in Rules sometines don't work
- Replies: 4
- Views: 62
Re: Value checking in Rules sometines don't work
There are some limitations on comparing the value in the on...do clause. Also you have to keep in mind the rules parsing stops at the first matching rules block. Best practice is to do the compares inside the rules block, like this: On Dummy#Value Do if %eventvalue1% > 100 LogEntry,"Test1, %eve...
- 25 Mar 2024, 22:41
- Forum: ESP Easy: General Discussion
- Topic: Impossible to make https.get() request in plugin
- Replies: 7
- Views: 75
Re: Impossible to make https.get() request in plugin
Like I said, there will be support for HTTPS for ESP32, just not for ESP8266. The reason it hasn't been released yet (I do have a PR pending for quite a while for ESP32) is that there is a nasty memory leak in mbed-TLS which I did make a very ugly work-around for while waiting for it to be properly ...
- 25 Mar 2024, 22:38
- Forum: ESP Easy: General Discussion
- Topic: Troubleshooting my wifi connection
- Replies: 15
- Views: 301
Re: Troubleshooting my wifi connection
As far as I can see (I do have the board myself) are the PoE pins directly connected from the PHY to those 2 solder pads on the side (in line with the rest of the pins). Thus not isolated. As example the pinout of just some generic (100 Mbps) PoE capable RJ45 connector: I don't know whether they exp...
- 25 Mar 2024, 21:30
- Forum: ESP Easy: General Discussion
- Topic: Impossible to make https.get() request in plugin
- Replies: 7
- Views: 75
Re: Impossible to make https.get() request in plugin
I don't know for sure as it was a long time I looked into SSL for ESP8266 and I know it was absolutely not usable with ESPEasy on ESP8266 as you simply don't have enough free RAM and those SSL libs add 20 - 50k (depending on libs, included cyphers etc) to the build size. Lately I have spent lots and...
- 25 Mar 2024, 20:07
- Forum: ESP Easy: General Discussion
- Topic: Impossible to make https.get() request in plugin
- Replies: 7
- Views: 75
Re: Impossible to make https.get() request in plugin
WiFiClientSecureBearSSL is explicitly disabled and added to the lib_ignore if I'm not mistaken
- 25 Mar 2024, 14:59
- Forum: ESP Easy: General Discussion
- Topic: Impossible to make https.get() request in plugin
- Replies: 7
- Views: 75
Re: Impossible to make https.get() request in plugin
Yep, we don't (yet) support HTTPS in ESPEasy and I don't think it will be added to ESP8266 builds as we're struggling with build size and available memory. Both will face a big hit on ESP8266 when adding HTTPS support.
It will be added to ESP32-builds, however no ETA right now.
It will be added to ESP32-builds, however no ETA right now.
- 24 Mar 2024, 23:52
- Forum: ESP Easy: Software
- Topic: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
- Replies: 34
- Views: 479
Re: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
Thanks for reporting back.
- 24 Mar 2024, 22:46
- Forum: ESP Easy: General Discussion
- Topic: Troubleshooting my wifi connection
- Replies: 15
- Views: 301
Re: Troubleshooting my wifi connection
For PoE on that specific board you need some add-on module which is also sold via Ali. I have not tried this PoE add-on module myself for this specific board. I guess it is way less expensive to buy one of those PoE "dongles" like these IEEE802.3af/at PoE modules as they do cost next to no...
- 24 Mar 2024, 22:37
- Forum: ESP Easy: Software
- Topic: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
- Replies: 34
- Views: 479
Re: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
@max100
Can you report if the test build Ton made is working?
If so, then it can be included in the next upcoming build.
Can you report if the test build Ton made is working?
If so, then it can be included in the next upcoming build.
- 24 Mar 2024, 12:56
- Forum: ESP Easy: General Discussion
- Topic: Troubleshooting my wifi connection
- Replies: 15
- Views: 301
Re: Troubleshooting my wifi connection
You can use an ESP32-variant with Ethernet. For example ETH01-EVO , which does have an ESP32-C3. Just keep in mind that flashing Ethernet modules for the first time might be a bit tricky as most do not have an USB port so you need an USB to serial adapter and pull the "boot" pin to GND whe...
- 24 Mar 2024, 00:14
- Forum: ESP Easy: Software
- Topic: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
- Replies: 34
- Views: 479
Re: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
To share sensor data to another ESPEasy node, you can have a look at the ESPEasy p2p controller: See: https://espeasy.readthedocs.io/en/latest/Controller/C013.html#c013-page The second one might be a bit more complex. Normally you could have a look at the "Domoticz MQTT Helper" plugin as d...
- 23 Mar 2024, 19:50
- Forum: ESP Easy: Software
- Topic: Plugin: _P049_MHZ19; set MeasurementRange command disabled?
- Replies: 4
- Views: 58
Re: Plugin: _P049_MHZ19; set MeasurementRange command disabled?
Well at least for the "A" version of this sensor it was never documented.
To be more precise, there wasn't any documentation at first so most of it was found by trial-and-error.
To be more precise, there wasn't any documentation at first so most of it was found by trial-and-error.
- 23 Mar 2024, 17:17
- Forum: ESP Easy: Software
- Topic: Plugin: _P049_MHZ19; set MeasurementRange command disabled?
- Replies: 4
- Views: 58
Re: Plugin: _P049_MHZ19; set MeasurementRange command disabled?
There have been MH-Z19 sensors permanently damaged by setting the range from 2000 -> 5000 ppm and also you don't have any factory calibration when changing the range. Also as far as I know, this was never an official published command. So it is unclear which firmware/module revision will allow this....
- 23 Mar 2024, 17:14
- Forum: ESP Easy: Software
- Topic: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
- Replies: 34
- Views: 479
Re: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
Also why do you seem to really _need_ to connect GPIO-0 to GND? The web flasher should be able to put your device in flash mode, but I know there are some boards out there which do not seem to react well to the signals to put the board into flash mode. However if you keep pressing the "BOOT&quo...
- 22 Mar 2024, 13:24
- Forum: ESP Easy: Software
- Topic: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
- Replies: 34
- Views: 479
Re: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
Nope, it is just the serial console of ESPEasy.
You can also open a console window via my web flasher tool if you don't have a proper terminal program on your PC.
You can also open a console window via my web flasher tool if you don't have a proper terminal program on your PC.
- 22 Mar 2024, 12:19
- Forum: ESP Easy: Software
- Topic: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
- Replies: 34
- Views: 479
Re: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
It is strange however that ESPEasy doesn't start the AP. Did you have other firmware installed on this exact node? Did you check the checkbox to erase the board while flashing? It looks like there might be some residual data left by the other firmware versions regarding WiFi credentials. Anyway if y...
- 21 Mar 2024, 23:30
- Forum: ESP Easy: Software
- Topic: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
- Replies: 34
- Views: 479
Re: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
If you had to connect GPIO-0 to GND, you must make sure to remove it after flashing and then power cycling the board.
It is probably still in flash mode as that's what you force with pulling GPIO-0 to GND.
It is probably still in flash mode as that's what you force with pulling GPIO-0 to GND.
- 21 Mar 2024, 22:30
- Forum: ESP Easy: Software
- Topic: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
- Replies: 34
- Views: 479
Re: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
I removed your IP range from the block list
- 21 Mar 2024, 22:23
- Forum: ESP Easy: Software
- Topic: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
- Replies: 34
- Views: 479
Re: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
Ah can you send me your public IP-address via a direct message?
Seems like you're in my very extensive IP-block. (I get a lot of hack attempts to my server)
Seems like you're in my very extensive IP-block. (I get a lot of hack attempts to my server)
- 21 Mar 2024, 21:53
- Forum: ESP Easy: Software
- Topic: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
- Replies: 34
- Views: 479
Re: I can't program ESP32 sw:"ESPEasy_mega_20240229_ESP32_binaries"
Which board do you have? Not all build sets on my web flasher have binaries for each ESP32 platform. The web flasher will detect which ESP32 is present and select the correct bin file accordingly. In the pull-down selector there is a list in [] to indicate which ESP types have a build for that selec...
- 21 Mar 2024, 15:56
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 35
- Views: 418
Re: Counting time, calculate and display?
Hmm not sure how well 3D printed shingles will hold outside.
Water may get in the seems and when it starts freezing, it may crack open.
Water may get in the seems and when it starts freezing, it may crack open.
- 21 Mar 2024, 15:26
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 35
- Views: 418
Re: Counting time, calculate and display?
I know Prusa did have "Mystic Brown", which is a very nice color.
Too bad they don't have it anymore.
Maybe you can just go for some "Urban Grey" as that's by far the easiest PETG to print with and then prime it and paint it?
Too bad they don't have it anymore.
Maybe you can just go for some "Urban Grey" as that's by far the easiest PETG to print with and then prime it and paint it?
- 21 Mar 2024, 15:10
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 35
- Views: 418
Re: Counting time, calculate and display?
Have you looked at Prusament?
https://www.prusa3d.com/en/category/filament/
And if it doesn't need to be PETG, you can choose more colors.
For example this one looks nice: https://www.prusa3d.com/en/product/prus ... gment-1kg/
https://www.prusa3d.com/en/category/filament/
And if it doesn't need to be PETG, you can choose more colors.
For example this one looks nice: https://www.prusa3d.com/en/product/prus ... gment-1kg/
- 20 Mar 2024, 17:25
- Forum: ESP Easy: General Discussion
- Topic: Sonoff POW R2
- Replies: 5
- Views: 99
Re: Sonoff POW R2
hard_Sonoff_POW build.
It includes the plugins for both the POW r1 and the r2.
It includes the plugins for both the POW r1 and the r2.
- 20 Mar 2024, 17:09
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 35
- Views: 418
Re: Counting time, calculate and display?
Such long cables, was that still serial or was it RS485? (or other variants with differential signals)
I know that using link cables > 5m was often an issue while copying data using Norton Commander or laplink or Ghostlink (I hope I don't mix up the names)
But those were using higher speeds.
I know that using link cables > 5m was often an issue while copying data using Norton Commander or laplink or Ghostlink (I hope I don't mix up the names)
But those were using higher speeds.
- 20 Mar 2024, 11:31
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 35
- Views: 418
Re: Counting time, calculate and display?
Those boards with display attached often are not easy to separate from eachother and extend the wiring as they will be using those flexible PCBs to connect. GPS over longer distance might not be a very good idea as the signal can pick up quite a lot of noise. You could however install some very basi...
- 20 Mar 2024, 10:35
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 35
- Views: 418
Re: Counting time, calculate and display?
A very simple and cheap way to get proper idea of time without wander is to use a GPS module. Only requirement is to have a clear view to the sky. Well it does work on my desk too, but only a few hours a day in total... You can also add a RTC clock chip to it with its own coin cell to keep track of ...
- 19 Mar 2024, 16:40
- Forum: ESP Easy: Software
- Topic: Send MQTT to different topics?
- Replies: 3
- Views: 92
Re: Send MQTT to different topics?
Just as a tip, you can easily test your strings by sending them to log using the command "logentry". This also does all string replacements. //Publish,energy/goodwe,'{"command":"udevice","idx":2509,"nvalue":0,"svalue":"%eventvalue4%&qu...
- 19 Mar 2024, 12:22
- Forum: ESP Easy: Software
- Topic: Send MQTT to different topics?
- Replies: 3
- Views: 92
Re: Send MQTT to different topics?
You can send whatever you like via rules. For example act on the event of a new measurement and send all values using the publish command. See also documentation for formatting domoticz-syntax formatted messages: https://espeasy.readthedocs.io/en/latest/Rules/Rules.html#parameter-parsing Assuming yo...
- 18 Mar 2024, 17:22
- Forum: ESP Easy: General Discussion
- Topic: modify config.dat possible?
- Replies: 2
- Views: 90
Re: modify config.dat possible?
I wonder why it doesnt save the settings. Is your file system nearly full? As that can lead to strange issues when saving. Anyway it is best to backup your settings file ASAP before making more changes as it can get corrupted when such silent errors occur. Silent as in I also don't get any errors wh...
- 18 Mar 2024, 10:35
- Forum: ESP Easy: General Discussion
- Topic: Troubleshooting my wifi connection
- Replies: 15
- Views: 301
Re: Troubleshooting my wifi connection
You can try to call "erasesdkwifi", wait a few seconds and then power cycle the ESP.
This will try to perform a new RF calibration as the calibration data is related to the voltage applied to the ESP.
This will try to perform a new RF calibration as the calibration data is related to the voltage applied to the ESP.
- 18 Mar 2024, 10:33
- Forum: ESP Easy: General Discussion
- Topic: Troubleshooting my wifi connection
- Replies: 15
- Views: 301
Re: Troubleshooting my wifi connection
Bad WiFi can be a symptom for sketchy power supply, especially when you didn't change anything else. If stuff suddenly stops working, then it likely is related to components going bad and the most common is the ageing of capacitors in a power supply. Typically the lifetime of a capacitor is rated as...
- 17 Mar 2024, 11:54
- Forum: ESP Easy: General Discussion
- Topic: Troubleshooting my wifi connection
- Replies: 15
- Views: 301
Re: Troubleshooting my wifi connection
First thought is about bad power supply, where the capacitors may have been ageing and thus loosing capacitance.
Is it a mains powered device, like some Sonoff?
Is it a mains powered device, like some Sonoff?
- 15 Mar 2024, 16:02
- Forum: ESP Easy: Projects / Applications
- Topic: Watermark 200SS-interface
- Replies: 2
- Views: 97
Re: Watermark 200SS-interface
Also keep in mind that the ADC on both ESP8266 as well as ESP32 (classic) is quite unusable close to 0V.
- 15 Mar 2024, 15:58
- Forum: ESP Easy: Projects / Applications
- Topic: Watermark 200SS-interface
- Replies: 2
- Views: 97
Re: Watermark 200SS-interface
Measuring an analog value will be way more stable on an ESP. Especially on ESP8266. On ESP32 it might be that frequency counting is a lot more stable compared to ESP8266, but still it highly depends on how regular the counting registers are being read. And please don't use ESP8266 for new projects. ...
- 11 Mar 2024, 14:57
- Forum: ESP Easy: Hardware
- Topic: Is it possible to use LCDs with ST7735&ST7739 controllers??
- Replies: 42
- Views: 25431
Re: Is it possible to use LCDs with ST7735&ST7739 controllers??
You can have a look at the /json page.
- 10 Mar 2024, 22:50
- Forum: ESP Easy: General Discussion
- Topic: Looking for a step by step tutorial for flashing an esp01
- Replies: 3
- Views: 147
Re: Looking for a step by step tutorial for flashing an esp01
Why do you still want to use the ESP01 boards? I assume you at least have the ones with 1M flash? They are really really limited and if you need to use it in some board designed for this very limited form factor, there are ESP32-C3 versions with this exact form factor like the TTGO T-01C3. Those do ...
- 10 Mar 2024, 21:35
- Forum: ESP Easy: General Discussion
- Topic: watchdog timer
- Replies: 8
- Views: 286
Re: watchdog timer
Well the documentation is as sparse as can be, so let me explain it a bit more.... erasesdkwifi does erase the block on the flash memory where the closed source WiFi code made by Espressif stores the WiFi RF calibration data. Between SDK versions the layout of this data has been changed a few times ...
- 10 Mar 2024, 21:29
- Forum: ESP Easy: Hardware
- Topic: [SOLVED] diymore AC/DC Power Supply ESP8266 WIFI Four-Way Relay Module ESP-12F Development Board
- Replies: 12
- Views: 428
Re: [SOLVED] diymore AC/DC Power Supply ESP8266 WIFI Four-Way Relay Module ESP-12F Development Board
As GPIO-16 is used, you probably can't use deepsleep on this board.
- 10 Mar 2024, 17:43
- Forum: ESP Easy: Hardware
- Topic: [SOLVED] diymore AC/DC Power Supply ESP8266 WIFI Four-Way Relay Module ESP-12F Development Board
- Replies: 12
- Views: 428
Re: diymore AC/DC Power Supply ESP8266 WIFI Four-Way Relay Module ESP-12F Development Board
That template is for an ESP32, you have a board with ESP8266
- 10 Mar 2024, 16:35
- Forum: ESP Easy: Hardware
- Topic: [SOLVED] diymore AC/DC Power Supply ESP8266 WIFI Four-Way Relay Module ESP-12F Development Board
- Replies: 12
- Views: 428
Re: diymore AC/DC Power Supply ESP8266 WIFI Four-Way Relay Module ESP-12F Development Board
The LC-tech plugin is intended to communicate with a separate microprocessor running its own firmware. This board indeed doesn't seem to have such a co-processor so it looks like you might be able to just toggle some GPIO pin. Just try to toggle GPIO pins and try not to use GPIO 6 - 11 as those are ...
- 10 Mar 2024, 12:55
- Forum: ESP Easy: Software
- Topic: EspEasy (8266 adc)
- Replies: 6
- Views: 229
Re: EspEasy (8266 adc)
I meant 100 nF at the analog input of the ESP. It is just to suppress any noise picked up when using a longer cable. Took me a while to find the Dutch words in the schematic, but found them :) I can be blind to those myself as it is my "moerstaal" :) Do you use "oversampling" on ...