In de the protocol reference is stated: Packet structure - RFlink describing data received from RF: Data: 20;ID=9999;Name;LABEL=data; Fields: 20 => Node number 20 means from the RFLink Gateway to the master, 10 means from the master to the RFLink Gateway Node number 11 means from the master to the m...

Is it still possible to pair a 433 remote with the sonoff and when ESP Easy is used?
Normally this done with 2 quick presses on the button.

Same question for disconnect the 433 remote with 3 buttons presses.

I have a TFA 30.3125 weather sensor. According to the list it is supported. But it doesn't show up in RFLink (latest version). I tried several other versions without success. I can see other weather sensors so my RFLink with RXB6 is working. With debug I see: 20;0A;DEBUG;Pulses=88;Pulses(uSec)=1200,...

I forgot to mention: when it is switched to 12bit on its own, it is not working anymore with 2 DS18B20. So with 2 connected it is only working when choosing 9 bits. When I connect one, it is also working on 12 bits. I use the ones with the long cable. I also use a pull-up. I also used this 2 with sa...

I'am running it now with 1 sensor for a while also with no problem. Sensor is also working on 12bit.

I will try with 1 sensor.

I'am not using the the web interface.

I have 2 DS18B20 connected to an esp8266. I´am using esp easy v2.0.0-dev11. I have added 2 devices with Temperature - DS18b20. I put the resolution on 9 bits. The devices are working fine. But after a while (can be one hour or shorter or longer) the devices are giving a reading of 85.00. When I look...