Hi, For those having access to a 3D printer, I just shared a printable case I made to support: Mega 2560 2 printable antenna to hold hold standard 17.3 cm wire from SYN115. The antennas are screwable into the 2 holes, can be removed for transport. Support and maintain a 3.3V/5V level shifter Support...

Mmmmh, thanks for the hint, I had a look and it looks very like what I wanted to do.

It even transform to json message I didn't asked for

Mmmmh, I just realized that I just decribed "how" I want to do it but did not described "what" I want to do ! So what I want to do is to connect RFLink to OpenHab2, where no specific binding exist for RFLink, but where managing messages with regexes and mqtt layer will implementa...

Apparently the Espressif correction is already included in the 2.4 rc2 version of ESP8266 arduiono SDK, which is good news: https://github.com/esp8266/Arduino/commit/e04903225e8e257a21c4a9872308d9edff08755c But what are the plan for ESP Easy to integrate it ? I'm not so sure that hiding the SSID wil...

Hi, With the Krack attack that have been published today regarding WPA2 weakness, what are the plan to mitigate risk in ESP Easy implementation ? The issue have already been trigered to esp8266 arduino Github: https://github.com/esp8266/Arduino/issues/3725 IOT devices should not be a weak part regar...

Hi Lisa, would that be such a complex task ? I guess my request is not that clear. What I'm talking about is just a dumb Gateway, message coming from MQTT specific topic being send as is on the serial line to the RFlink and Vice-Versa. Of course the MQTT server is running somewhere else. ESP Easy al...

Hi, I have a working ser2net interface on NodeMCU with ESP easy 2.0.0.dev12 to RFlink. Now I would like to use it with MQTT, with every line coming from the serial interface published to a specific topic, (or with a topic per devices), and a topic subscribed by the ESP where every message will be se...

Well, I'm not sure what was the root cause, but finally after rewiring everything from scratch, using a NodMCU and the power from the NodeMCU Vin to the Mega2560, I have my ser2net version of RFlink up and running.

Hi, I'm trying to get back remote access to my RFlink device. The device is build on a standard Mega2560, with SYN480R and SYN115 wired as stated on the wiring documentation (Pin14,15,16,19 and GND). Based on the RFLink loader software I get signal from my devices. I used an ESP01, connected through...