+here
http://www.letscontrolit.com/forum/viewtopic.php?t=2761
Search found 95 matches
- 07 Jan 2019, 05:15
- Forum: ESP Easy: General Discussion
- Topic: No infrared plugin ?
- Replies: 5
- Views: 5102
- 07 Jan 2019, 05:12
- Forum: ESP Easy: General Discussion
- Topic: No infrared plugin ?
- Replies: 5
- Views: 5102
Re: No infrared plugin ?
IR would not be a common usage I guess, so maybe you need to add the required files & self compile, bit of reading here post #39 showing required files. http://www.letscontrolit.com/forum/viewtopic.php?p=8709 Anyway sure someone will be able to guide you better with real experience, this will ge...
- 11 Jun 2018, 01:34
- Forum: ESP Easy: General Discussion
- Topic: Help - update bricked S20
- Replies: 43
- Views: 25708
Re: Help - update bricked S20
Did you set the baud rate in Termite to 115200 ?
Are you seeing any 'Readable Text' in Termite ?
If so go back read my earlier post...
(You need to see the text output as Sonoff is first powered)
Are you seeing any 'Readable Text' in Termite ?
If so go back read my earlier post...
(You need to see the text output as Sonoff is first powered)
- 08 Jun 2018, 23:09
- Forum: ESP Easy: General Discussion
- Topic: Help - update bricked S20
- Replies: 43
- Views: 25708
Re: Help - update bricked S20
Grab Termite https://www.compuphase.com/software_termite.htm with FTDI plugged in & Sonoff connected, no other serial monitors open (will only work with one at a time) Configure correct COMs port to match FTDI You should see output like you have already (every 30 seconds) Uptime 2 ConnectFailure...
- 04 Jun 2018, 22:59
- Forum: ESP Easy: General Discussion
- Topic: Help - update bricked S20
- Replies: 43
- Views: 25708
Re: Help - update bricked S20
Sure, this says it's still alive, ;) Assume by now you have cold booted while connected to a serial monitor ? Information you need will be visible to you then.. Then it will help to know the available serial commands https://www.letscontrolit.com/wiki/index.php/ESPEasy_Command_Reference EG setting W...
- 03 Jun 2018, 22:43
- Forum: ESP Easy: General Discussion
- Topic: Help - update bricked S20
- Replies: 43
- Views: 25708
Re: Help - update bricked S20
Connect to Serial Monitor program, then power up S20, you should see output
The LEDs are not pre-configured in the firmware..
If you have serial output - set the wifi via serial, then you should be able to use web-interface
The LEDs are not pre-configured in the firmware..
If you have serial output - set the wifi via serial, then you should be able to use web-interface
- 06 May 2018, 03:53
- Forum: ESP Easy: General Discussion
- Topic: Custom firmware problem
- Replies: 35
- Views: 22521
Re: Custom firmware problem
Did you do a clean before re/compile ?
- 04 May 2018, 12:48
- Forum: ESP Easy: General Discussion
- Topic: Response browser time?
- Replies: 5
- Views: 4816
Re: Response browser time?
The other option for compiling is platformIO via Atom
- 04 May 2018, 00:00
- Forum: ESP Easy: General Discussion
- Topic: Using a ESPEasy as WiFi extender?
- Replies: 5
- Views: 7181
Re: Using a ESPEasy as WiFi extender?
An antenna is a great idea.
An extra access point made from an old router is maybe the easiest.
An ESP module can even be made into an access point with special firmware, but can not beat a proper one
An extra access point made from an old router is maybe the easiest.
An ESP module can even be made into an access point with special firmware, but can not beat a proper one
- 02 May 2018, 12:52
- Forum: ESP Easy: General Discussion
- Topic: Response browser time?
- Replies: 5
- Views: 4816
Re: Response browser time?
Please try 0502, the latest revision and report back, huge improvements has just been made.
https://github.com/letscontrolit/ESPEasy/releases
https://github.com/letscontrolit/ESPEasy/releases
- 28 Apr 2018, 07:51
- Forum: ESP Easy: General Discussion
- Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
- Replies: 68
- Views: 42130
Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Hi Albertus, As I said "Any questions, please open a fresh topic" I have no experience with "Openhab" I use "Domoticz" for simple data logging & some complex rules for alerts for alarm / fault situations I can help with general questions about Sonoff Basic units, bu...
- 27 Apr 2018, 03:24
- Forum: ESP Easy: General Discussion
- Topic: Automated Reboot Option ?
- Replies: 2
- Views: 2771
Re: Automated Reboot Option ?
danielo111 the solution provided by arion_p will do exactly as you ask however,
it shouldn't be a problem, recent releases have Wifi connectivity issues & those problems are being worked on..
You could post an Issue over on Github or try an older firmware
it shouldn't be a problem, recent releases have Wifi connectivity issues & those problems are being worked on..
You could post an Issue over on Github or try an older firmware
- 26 Apr 2018, 05:31
- Forum: ESP Easy: General Discussion
- Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
- Replies: 68
- Views: 42130
Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Albertus, this will be useful if you still need to get up and working.
There is no 'one config' suits all, we all need different things.
https://www.letscontrolit.com/wiki/index.php/ESPEasy
Any questions, please open a fresh topic
thanks
There is no 'one config' suits all, we all need different things.
https://www.letscontrolit.com/wiki/index.php/ESPEasy
Any questions, please open a fresh topic
thanks
- 21 Apr 2018, 08:59
- Forum: ESP Easy: General Discussion
- Topic: Uptime... Clarification
- Replies: 2
- Views: 2284
Re: Uptime... Clarification
Thanks
I know it seems like an obvious question, but I just need the clarification
Cheers
I know it seems like an obvious question, but I just need the clarification
Cheers
- 21 Apr 2018, 07:49
- Forum: ESP Easy: General Discussion
- Topic: Uptime... Clarification
- Replies: 2
- Views: 2284
Uptime... Clarification
Code: Select all
2431014 : WD : Uptime 41 ConnectFailures 0 FreeMem 19144
Thanks
- 19 Apr 2018, 00:50
- Forum: ESP Easy: General Discussion
- Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
- Replies: 68
- Views: 42130
Excessive Reporting Bug
A fresh firmware flash, NTP, Wifi connection, DHCP, Domoticz MQTT controller a switch with send boot state, not inverted, internal pull up ticked Nothing else needed to replicate. The point this 'excessive reporting bug' was introduced Jumper cable between GPIO14 & GND, no need to touch the jump...
- 18 Apr 2018, 18:36
- Forum: ESP Easy: General Discussion
- Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
- Replies: 68
- Views: 42130
Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
No problems Grovkillen ! These bugs are resource hogs I am sure, their impact can cause roll on effects, such as Wifi disconnects, reporting over loads & even reboots.. While active in current releases I am sure it makes debugging 'other issues' harder too.. I have several more bugs I have notic...
- 18 Apr 2018, 17:44
- Forum: ESP Easy: General Discussion
- Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
- Replies: 68
- Views: 42130
Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Oh nice, first firmware I try is: ESP_Easy_mega-20180112_normal_ESP8266_1024.bin Serial output from removing a jumper cable between GPIO14 & GND - wait - Then replacing it SW : Switch state 0 Output value 0 EVENT: FULL_Tray_2#Switch=0.00 SW : Switch state 1 Output value 1 EVENT: FULL_Tray_2#Swit...
- 18 Apr 2018, 17:31
- Forum: ESP Easy: General Discussion
- Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
- Replies: 68
- Views: 42130
Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
And so I backed tracked the first bug... The GPIO14 showing wrongly all started in Dev_11, Dev_10 & older firmwares older work just fine.. Next bug to backtrack, is the excessive reporting Serial output from removing a jumper cable between GPIO14 & GND - wait - Then replacing it SW : Switch ...
- 07 Apr 2018, 07:54
- Forum: ESP Easy: General Discussion
- Topic: Firmware releases
- Replies: 8
- Views: 5295
Re: Firmware releases
"Don't fix what aint broke.." If it works as you need now, then why upgrade ? And for the most part, you should be able to upgrade as we covered with OTA, if a reason to upgrade exists ;) And if you must.. Be careful though, as the newer release become padded with fluff... that the size do...
- 07 Apr 2018, 07:44
- Forum: ESP Easy: General Discussion
- Topic: Create backup of the current ESP8266 flash
- Replies: 7
- Views: 14697
Re: Create backup of the current ESP8266 flash
I like it, I use 'pre-configured' back-ups all the time too.. I setup one ESPeasy Firmware, preconfigured with all my favourite settings defined to a static IP 192.168.0.200, after flashing I know exactly where to find it http://192.168.0.200 A few minor edits like: Pump_0 to Pump_8 IP 192.168.0.200...
- 02 Apr 2018, 10:34
- Forum: ESP Easy: General Discussion
- Topic: ESP Wifi Gone after saving settings
- Replies: 12
- Views: 6966
Re: ESP Wifi Gone after saving settings
https://www.itead.cc/wiki/PSF-B85
Yep 8285...
ESP_Easy_mega-20180402_normal_ESP8285_1024.bin listed as 608K in size.
Ok watching from side lines
Yep 8285...
ESP_Easy_mega-20180402_normal_ESP8285_1024.bin listed as 608K in size.
Ok watching from side lines
- 02 Apr 2018, 10:26
- Forum: ESP Easy: General Discussion
- Topic: ESP Wifi Gone after saving settings
- Replies: 12
- Views: 6966
Re: ESP Wifi Gone after saving settings
Bit more info plz, hardware by ? ESp chip 8266? Firmware version ?
Ta
Ta
- 02 Apr 2018, 09:14
- Forum: ESP Easy: General Discussion
- Topic: Error writing config.dat
- Replies: 18
- Views: 13159
Re: Error writing config.dat
Great your first successful OTA update ? awesome.. To test the error you do need to try & change something tiny in the config... Then click Submit, it is at this point you 'may' see the error writing config again.. (Actually changing nothing, but simply click "Submit" should work too) ...
- 02 Apr 2018, 08:41
- Forum: ESP Easy: General Discussion
- Topic: Error writing config.dat
- Replies: 18
- Views: 13159
Re: Error writing config.dat
Me too, OTA failed time after time.. Some help here, I made an initial uploader https://github.com/letscontrolit/ESPEasy/issues/1190 Any questions welcome before you try... I want it to be quick & painless for you ;) On the page above you are looking for Initial_Firmware_Uploader_Sonoff_1M.zip I...
- 02 Apr 2018, 01:52
- Forum: ESP Easy: General Discussion
- Topic: Error writing config.dat
- Replies: 18
- Views: 13159
Re: Error writing config.dat
It could be done via OTA Firmware updating... Just a few clicks, to change from firmware you are using now to the one you had the problem with. this way, after you have possibly confirmed bug has returned, you could very quickly restore the working release without losing any settings. And again: Jus...
- 02 Apr 2018, 01:47
- Forum: ESP Easy: General Discussion
- Topic: Error writing config.dat
- Replies: 18
- Views: 13159
Re: Error writing config.dat
I flashed my Sonoff with the 20180306 firmware and when I configure the device I get this error message: FS : Error while reading/writing config.dat in 794 I know this might be painful for you Hans65, but if you no longer see this bug.... Could you please... Reflash the 20180306 firmware & conf...
- 02 Apr 2018, 01:21
- Forum: ESP Easy: General Discussion
- Topic: Error writing config.dat
- Replies: 18
- Views: 13159
- 02 Apr 2018, 01:17
- Forum: ESP Easy: General Discussion
- Topic: Error writing config.dat
- Replies: 18
- Views: 13159
Re: Error writing config.dat
Hi Grovkillen I've updated 50+ units is this with the absolute most recent releases ? Has only every happened to me with the last few releases.. I can not say if it has been resolved (the writing config error) with most recent release as I am still back tracking bugs. I am not flashing most recent f...
- 01 Apr 2018, 13:41
- Forum: ESP Easy: General Discussion
- Topic: Error writing config.dat
- Replies: 18
- Views: 13159
Re: Error writing config.dat
After I had troubles I did a full erase, manually setup everything again & it still happened, it was suspected my device was failing.. I rolled back to older firmware, the issue was gone, upgraded again, the issue returned, even with the minimal latest firmware ! I attempt to edit something like...
- 01 Apr 2018, 11:56
- Forum: ESP Easy: General Discussion
- Topic: Error writing config.dat
- Replies: 18
- Views: 13159
Re: Error writing config.dat
I have no time to go into detail or even pay attention, but I had this & there is nothing wrong with your sonoff,
roll back to an earlier firmware & you will see the error is gone
roll back to an earlier firmware & you will see the error is gone
- 01 Apr 2018, 01:34
- Forum: ESP Easy: General Discussion
- Topic: Espeasy with momentary switches / impulse (latching) relay
- Replies: 4
- Views: 5561
Re: Espeasy with momentary switches / impulse (latching) relay
on Button#value do if [Button#value] = 0 publish domoticz/in,{"idx":26,"nvalue":0,"svalue":"0"} else publish domoticz/in,{"idx":26,"nvalue":0,"svalue":"1"} endif endon Will not make ESP module do anything, but will repo...
- 01 Apr 2018, 00:13
- Forum: ESP Easy: General Discussion
- Topic: Espeasy with momentary switches / impulse (latching) relay
- Replies: 4
- Views: 5561
Re: Espeasy with momentary switches / impulse (latching) relay
These have been set in Devices ?
Button#value <- what is it ? What GPIO is it using ?
GPIO14 has been defined in Devices ? (What is it's name there ?)
Button#value <- what is it ? What GPIO is it using ?
GPIO14 has been defined in Devices ? (What is it's name there ?)
- 01 Apr 2018, 00:04
- Forum: ESP Easy: General Discussion
- Topic: RSSI system variable
- Replies: 10
- Views: 8632
Re: RSSI system variable
Excellent tip, thanks TD-er
- 31 Mar 2018, 11:57
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy Webdumper
- Replies: 59
- Views: 36454
ESP Easy Webdumper & Performance Tool
Excellent, I was awake for over 36 hours configuring my 'test environment' - I have an older firmware which has not yet failed, so I have a base line, a few hours 'power sleep' and I am back. Only 2 firmware versions higher & I see 'bad behaviour' - very pleased, but so much more to do before I ...
- 31 Mar 2018, 03:30
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy Webdumper
- Replies: 59
- Views: 36454
Re: ESP Easy Webdumper
Hi Grovkillen,
An idea, the total time taken !
This could be used as a measure of web-server performance to measure differences in firmwares
Cheers
An idea, the total time taken !
This could be used as a measure of web-server performance to measure differences in firmwares
Cheers
- 30 Mar 2018, 18:53
- Forum: ESP Easy: General Discussion
- Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
- Replies: 68
- Views: 42130
Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Yes, no problem TD-er, I have a plan and everything is coming together very nicely..
Which reminds me I have several things to do if I want faster progress.
I had better stop everything I am doing now and focus on those menial tasks..
Thank for the distraction @3.51AM
I want this done...
Which reminds me I have several things to do if I want faster progress.
I had better stop everything I am doing now and focus on those menial tasks..
Thank for the distraction @3.51AM
I want this done...
- 30 Mar 2018, 00:54
- Forum: ESP Easy: General Discussion
- Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
- Replies: 68
- Views: 42130
Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
I have been building up a 'tool box' of tools, first - 'working OTA Sonoff firmware updating', tick done. second - a full set of all firmwares since inspection and each's source-code, tick done. third - modify all those firmwares so they are also fully compatible with OTA Sonoff firmware updating, t...
- 29 Mar 2018, 10:22
- Forum: ESP Easy: Hardware
- Topic: Sonoff Basic - AP not apearing on first boot with pre-built BIN
- Replies: 59
- Views: 77322
- 28 Mar 2018, 18:56
- Forum: ESP Easy: General Discussion
- Topic: Notifications by Email, the good old days
- Replies: 5
- Views: 3557
Re: Notifications by Email, the good old days
A todo to add proper description of email notification is pending on the ESPeasy wiki documentation Slack. Don't forget this is all done in spare time by only a handful of developers and enthusiasts. Often with a full-time job and a family. Just thought it deserved a mention as I expect your guys p...
- 28 Mar 2018, 15:09
- Forum: ESP Easy: General Discussion
- Topic: Notifications by Email, the good old days
- Replies: 5
- Views: 3557
Re: Notifications by Email, the good old days
Ah ok, so it was just there as a tease, thanks for the response
- 28 Mar 2018, 14:48
- Forum: ESP Easy: General Discussion
- Topic: Disable/enable Devices via commands?
- Replies: 11
- Views: 8415
Re: Disable/enable Devices via commands?
Sorry my first post wasn't so clear, I was about to leave to do a job, anyway my thing is, I have a pump watering a system with plants & I am away.. Before I left I set-up a back up reservoir in case anything happens to the first.. Well no point in the first running if it's close to empty, and t...
- 28 Mar 2018, 14:01
- Forum: ESP Easy: General Discussion
- Topic: Notifications by Email, the good old days
- Replies: 5
- Views: 3557
Re: Notifications by Email, the good old days
BTW.. the "?" -- "Notifications" help button takes us to a 'brag' page about a project..
https://www.letscontrolit.com/wiki/inde ... ifications
I know, there is always lots to get done, but it needs mentioning.
Cheers
https://www.letscontrolit.com/wiki/inde ... ifications
I know, there is always lots to get done, but it needs mentioning.
Cheers
- 28 Mar 2018, 13:52
- Forum: ESP Easy: General Discussion
- Topic: Notifications by Email, the good old days
- Replies: 5
- Views: 3557
Notifications by Email, the good old days
This is a screenshot from old firmware v2.0.0-dev4 - using it for debug purposes.
How do I set the senders password, tried to find info on it online without luck, thanks !
How do I set the senders password, tried to find info on it online without luck, thanks !
- 28 Mar 2018, 13:46
- Forum: ESP Easy: General Discussion
- Topic: Save/restore ESPEasy configuration: prob/WA
- Replies: 5
- Views: 4069
Re: Save/restore ESPEasy configuration: prob/WA
I found the cause of why OTA has not been working on Sonoffs ! I have made a custom uploader & a full set of every ESPeasy firmware I could find.. as DOUT.. Now able to downgrade & upgrade OTA no problems anymore.. :D Looking for difference in behaviour between each firmware release to see w...
- 27 Mar 2018, 04:46
- Forum: ESP Easy: General Discussion
- Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
- Replies: 68
- Views: 42130
- 27 Mar 2018, 04:05
- Forum: ESP Easy: General Discussion
- Topic: Disable/enable Devices via commands?
- Replies: 11
- Views: 8415
Re: Disable/enable Devices via commands?
You can create rules to turn them on at a certain time & off at a certain time ! See Wiki of commands https://www.letscontrolit.com/wiki/index.php/ESPEasy_Command_Reference https://www.letscontrolit.com/wiki/index.php/Tutorial_Rules You are looking for On Clock#time I would be interested in a co...
- 26 Mar 2018, 21:47
- Forum: ESP Easy: General Discussion
- Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
- Replies: 68
- Views: 42130
Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Tasmota firmware works fine 99.9%, but the timer cycles are not internal & are dependant on a back-end such as Domoticz to fire the cycles & then Domoticz rules to then stop the pump.. And of course a constant WiFi signal... The 'Tasmota way' simply has more points of failure than something ...
- 25 Mar 2018, 23:20
- Forum: ESP Easy: General Discussion
- Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
- Replies: 68
- Views: 42130
Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Also, there are older (proven) versions of espeasy - why you have to use a bleeding edge version in a production environment? So does this mean you are posting to suggest to me a particular firmware that I should try ? Something which I could provide Developers feedback on, so changes can be back-t...
- 25 Mar 2018, 11:06
- Forum: ESP Easy: General Discussion
- Topic: Notification by gmail
- Replies: 5
- Views: 4176
Re: Notification by gmail
My solution was to use one of the 4 email address supplied by my by ISP
to send the email using port 25 to my gmail account..
So my IoT devices have their own 'sending email' address
Hope this helps
to send the email using port 25 to my gmail account..
So my IoT devices have their own 'sending email' address
Hope this helps