Search found 7 matches

by jollyroger
29 Sep 2018, 11:06
Forum: ESP Easy: Projects / Applications
Topic: ESP easy+nodemcu+HC-SR501 problem
Replies: 22
Views: 16205

Re: ESP easy+nodemcu+HC-SR501 problem

nothing to do probably the sensor model has problems .. I will try to change the manufacturer ..
by jollyroger
28 Jul 2018, 20:13
Forum: ESP Easy: Projects / Applications
Topic: ESP easy+nodemcu+HC-SR501 problem
Replies: 22
Views: 16205

Re: ESP easy+nodemcu+HC-SR501 problem

nothing to do, I inserted a 10k resistor between the GPIO and the sensor data output but I continue to have fakes, it goes continuously between the two states
by jollyroger
11 Jul 2018, 16:24
Forum: ESP Easy: Projects / Applications
Topic: ESP easy+nodemcu+HC-SR501 problem
Replies: 22
Views: 16205

Re: ESP easy+nodemcu+HC-SR501 problem

Now it seems to work (at least now I see it on HA). I connected the pir sensor to the vin pin of nodeMCU and then gnd and GPIO10. the problem now is that it continues to detect movement even if it is not there. passes continuously from 0 to 1. I tried to rotate the trimmers but nothing.
by jollyroger
02 Jul 2018, 16:12
Forum: ESP Easy: Projects / Applications
Topic: ESP easy+nodemcu+HC-SR501 problem
Replies: 22
Views: 16205

Re: ESP easy+nodemcu+HC-SR501 problem

So you want to say that to see if it works correctly I can do it from the frontend of Home Assistant (in my case) and not from the web page of ESP easy? did I get it right?. I tried various ways of power, since my nodemcu card does not have a 5V output pin I tried to power the sensor with 3.3V, thro...
by jollyroger
01 Jul 2018, 20:18
Forum: ESP Easy: Projects / Applications
Topic: ESP easy+nodemcu+HC-SR501 problem
Replies: 22
Views: 16205

Re: ESP easy+nodemcu+HC-SR501 problem

this is my sensor PIR: HC-SR501
by jollyroger
01 Jul 2018, 16:54
Forum: ESP Easy: Projects / Applications
Topic: ESP easy+nodemcu+HC-SR501 problem
Replies: 22
Views: 16205

ESP easy+nodemcu+HC-SR501 problem

Goodmorning everyone. I have a problem with the PIR motion sensor. I connected it to the nodemcu with ESP easy mega firmware (ESP_Easy_mega-20180624_normal_ESP8266_4096) by following the instructions here (https://www.letscontrolit.com/wiki/index.php/PIR_Sensor), but on the module page it always giv...