Hello, Ath Thank you very much I answer your questions: - What is the size of 'after a while', minutes, hours, days? ==> minutes, less than 30 minutes - There is a setting to generate an event even when the value doesn't change (Send event when value unchanged). Do you have that checked or unchecked...

Hello,

Unfortunately after a while, the value increases no longer work.

A change in timing or a reboot of the wemos fixes this problem, but comes back.

Best regards

it works !!!!!!

Thank you very much, Ath, you are a god!

What does the value of "Ambient" correspond to?

Hello Ath,

Thank you for your precious help !!!, it would indeed be amazing if you could get the VL53L1X to work with espeasy for people like me who don't have this skill.

Best regards

Hello,

I am in the same case, impossible to make the VL53l1X work with espeasy, I tried several firmware and several tutorials, in vain

Hello, Excuse me for the delay in response, I was overwhelmed with work. here is a screenshot of the module configuration in espeasy, the address is in 0x29c https://nsa40.casimages.com/img/2021/03/30/210330081840144919.jpg https://nsa40.casimages.com/img/2021/03/30/210330082411980999.jpg I have 2 s...

Hello, I installed the firmware ESP_Easy_mega_20210308_normal_ESP8266_4M1M_VCC, connected the VL53L1X from the CQrobot brand http://www.cqrobot.wiki/index.php/VL53L ... nce_Sensor I have nothing in the I2 scan log : https://nsa40.casimages.com/img/2021/03/10/210310061319276498.jpg and nothing in the...

Hello,

It's great of you !
I will test this week as soon as I have time and I will return to give the result.

I can't wait to see the result....

Best regards

Hello, Hello, I tested with a VL53L1X from another brand: same result. https://www.amazon.fr/gp/product/B07P1HZ1Y4/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 The I2c scan takes the VL53L1X sensor well but in the log I have an error message: 2893640: VL53L0X: Sensor not found, init failed f...

Hello, Thank you for your reply The espeasy log indicates: the sensor is not found !!! 60516: VL53L0X: Sensor not found, init failed for 0x29 62138: WD : Uptime 1 ConnectFailures 0 FreeMem 25464 WiFiStatus 3 ESPeasy internal wifi status: Conn. IP Init I ordered a VL53L1X from another brand to test, ...

Hello, I'm trying to get the VL53L1X to work with espeasy so I installed the firmware ESP_Easy_mega_20210206_normal_ESP8266_4M1M_VCC but it doesn't work. The VL53L1X module is from the CQrobot brand : https://www.cqrobot.com/index.php?route=product/product&product_id=1110&search=VL53L1X&...

Problem solved, I found a thread that talks about this problem and gives the solution: https://github.com/letscontrolit/ESPEasy/issues/2409 ==> I used the ROM 20190226_normal_ESP8266_4M.bin -> OK, stable (*) and I updated via OTA to the latest one :ESPEasy_ESP82xx_mega-20210114 "...........I al...

Oh and just to be sure it isn't a power related issue, please also try another USB cable and make sure to connect it to the PC directly or via a powered USB hub. I've seen a number of issues with recently bought Wemos units where they found another way of cutting costs on the USB connector. So not ...

Unfortunately it does not save the data although the log indicates OK
It is always in access point
I would try putty later, but it's really weird

Thanks for wanting to help me I just force the wifi configuration without flashing https://nsa40.casimages.com/img/2021/02/20/mini_210220125758886557.jpg Log below : ######2021-02-20###### #######0.04.007####### ######FLASH INFO###### BIN file: Programming only... COM port: (COM4) USB-SERIAL CH340 (...

Flashing goes well, log below with ESPEasy_ESP82xx_mega-20210114-72-g9cc071f6 ######2021-02-20###### #######0.04.007####### ######FLASH INFO###### BIN file: ESP_Easy_mega_20210217_normal_ESP8266_4M1M.bin COM port: (COM4) USB-SERIAL CH340 (Port_#0002.Hub_#0001) Baud rate: 115200 ######POST FLASH#####...

Thanks, Ok, I test and I make a return

Flashing in progress

There is one exclamation mark (!) only as a special character, the password is correct, checked on the asus router, test with my phone, used for a long time

Hello,

Of course as indicated in my message I connect to the asus 2G network, without success, even by placing the module near the asus router, with a strong signal....

Hello, I installed espeasy on 2 wemos D1 mini last year, no problem. Today I am trying on 3 new wemos d1 mini card, but I am faced with a problem: I cannot connect it to my wifi network (which has not changed). In Espeasy flasher, I enter the ssid, the password and the IP address, After the flash, t...