A compromise solution was found. If you select SH 1106 128x64 Rotated, it is displayed normally, only two dots in the upper left corner.

Maybe like this?
https://www.fontspace.com/segment7-font-f19825

It would also be nice to add a degree Celsius symbol. {D}

Yes, unfortunately, other characters also have different widths.
Although this is not so critical.

Good afternoon.
ESP32, firmvare display_ESP32_4M316k, 30.11.2023.
In the sevenseg24 and sevenseg18 fonts, the "1" character has a smaller width than all the others. Because of this, the display of numbers shifts. Can this be fixed somehow?

Sorry, I sent the wrong link.
Here's the correct one.
https://www.digole.com/products_picture ... 20V0_2.pdf

The inscription on the display board is SH1116

There is a datasheet. I bought it on aliexpress. Probably new, never seen anything like it before. I2C connection. https://aliexpress.ru/item/4001051535838.html?spm=a2g2w.orderdetail.0.0.5d8c4aa6TWR1cM&sku_id=12000036725051994 https://cdn.velleman.eu/downloads/29/infosheets/sh1106_datasheet.pdf

Good afternoon. Are there plans to support I2C display with the SH1116 controller?
If you connect it like SH1106, it looks like in the photo.

Thank you.
Everything worked out.

Good afternoon. I connected the st7789 display. In the rules I wrote this: on System#Boot do st7789cmd,clear LoopTimerSet,1,1 st7789,r,0,0,320,240,Blue st7789,lh,21,320,Blue st7789,lh,218,320,Blue endon on Rules#Timer=1 do st7789,txp,40,50 st7789,txs,5 st7789,txc,Red st7789,txt,%systime% st7789,txc,...