Search found 221 matches
- 05 Feb 2019, 14:43
- Forum: ESP Easy: Software
- Topic: Looping the Loop without getting dizzy
- Replies: 7
- Views: 4547
Re: Looping the Loop without getting dizzy
Hi Grovkillen, Thank you. One section of the code I wanted to improve is this area below... On Temp2#Temperature do if [Temp2#Temperature] < [Temp1#Temperature] and [Temp2#Temperature] = 21 Event,StopHP endif endon - I wanted to perform the temperature check as a range instead of just 21 degrees i....
- 26 Jan 2019, 21:42
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy Security - SSL/TLS, MQTT over TLS and certificates
- Replies: 6
- Views: 10708
Re: ESPEasy Security - SSL/TLS, MQTT over TLS and certificates
I do not want to host an MQTT server in my house, and in every friend's house that I recommend / install ESPEasy h/w at. Although I agree that SSL is a good thing, and this would be very useful in ESPEasy, I would never use a public MQTT server, and i would not recommend to anyone, who is capable t...
- 26 Jan 2019, 20:55
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy Security - SSL/TLS, MQTT over TLS and certificates
- Replies: 6
- Views: 10708
Re: ESPEasy Security - SSL/TLS, MQTT over TLS and certificates
Is MQTT TLS not achievable ? I noticed a few other ESP8266 solutions (tasmota, mongoose, and the likes) that support MQTT TLS I do not want to host an MQTT server in my house, and in every friend's house that I recommend / install ESPEasy h/w at. Publishing sensitive information to the cloud un-encr...
- 25 Jan 2019, 20:05
- Forum: ESP Easy: Projects / Applications
- Topic: MQTT control IRsend plugin ?
- Replies: 2
- Views: 5401
Re: MQTT control IRsend plugin ?
https://espeasy.readthedocs.io/en/latest/Reference/Command.html#commands-listed <MQTT subscribe template>/cmd with payload: <command> So /BarIR/TeacAmp/cmd with payload IRSEND,NEC,3CC302FD,32 This works for me when toggling GPIOs but never tested it with IR. Please test it and post back. -D
- 19 Jan 2019, 21:34
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
%sysname%/#/ is what it takes to report properly... that last / made the difference I guess that it is working now as needed. :) The PING payload is implemented in the latest commit, this is the only reliable way i found to check if the MQTT connection is opened and usable. gpio command is located ...
- 19 Jan 2019, 18:31
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
%sysname%/#/ is what it takes to report properly... that last / made the difference
-D
-D
- 19 Jan 2019, 18:21
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
I s the cmd supported ? %sysname%/#%valname%/cmd with payload a command such as : gpio,<pin>,<state> Yes, but the above will not work. If you use this in the "Command topic" %sysname%/#%valname%/ Or even this: %sysname%/#%valname%/set Then the controller will watch for: %sysname%/cmd and ...
- 19 Jan 2019, 11:07
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
Indeed, my need was not very clear. In fact for publish topic I use %sysname%/%valname% for all my ESPEasy devices (ie without %tskname%). This was mainly for my home automation system (Jeedom with MQTT plugin) to avoid automatic creation of sub-devices. I also find it easier to read though this me...
- 17 Jan 2019, 16:46
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
Hello,
' Password1# ' seemed to be the issue.. changing it to ' Password1 ' (no ' # ' at the end) now works in the RPIeasy.
Parsing issue ?
-D
' Password1# ' seemed to be the issue.. changing it to ' Password1 ' (no ' # ' at the end) now works in the RPIeasy.
Parsing issue ?
-D
- 17 Jan 2019, 16:25
- Forum: ESP Easy: General Discussion
- Topic: endif vs endon
- Replies: 2
- Views: 4528
Re: endif vs endon
Hello,
Endon ends an "On event"
Endif ends and If
on <trigger> do
if <test>
<action>
<action>
endif
endon
More here :
https://espeasy.readthedocs.io/en/lates ... Rules.html
-D
Endon ends an "On event"
Endif ends and If
on <trigger> do
if <test>
<action>
<action>
endif
endon
More here :
https://espeasy.readthedocs.io/en/lates ... Rules.html
-D
- 17 Jan 2019, 10:02
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
I need to send the system for a reboot every time I make any changes to the MQTT settings to get rid of the "issues". Gets connected... stays connected... no disconnects... no user/pass warnings... This is so far for the non secure... moving along with a TLS connection... will report back...
- 16 Jan 2019, 15:31
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
I need to send the system for a reboot every time I make any changes to the MQTT settings to get rid of the "issues". Gets connected... stays connected... no disconnects... no user/pass warnings... This is so far for the non secure... moving along with a TLS connection... will report back....
- 16 Jan 2019, 12:46
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
Yet in the log : 19:32:01 Event: GenMQTT#Connected 19:32:07 Unit alive: 3 19:32:07 Unit alive: 3 19:32:07 Unit alive: 3 19:32:14 Unit alive: 1 19:32:14 Unit alive: 1 19:32:14 Unit alive: 1 19:32:26 Unit alive: 2 19:32:26 Unit alive: 2 19:32:26 Unit alive: 2 19:32:26 MQTT connection error: 5 Althoug...
- 14 Jan 2019, 18:36
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
FF "solved" the upload issue (Chrome still doesn't) Thank you for this information I can reproduce this bug with Chrome, and created a new issue for it. Connected to : mqtt.gbridge.kappelt.net MQTT server: mqtt.gbridge.kappelt.net MQTT port: 8883 MQTT protocol: Version 3.1 TLS: TLS V1.2 M...
- 14 Jan 2019, 12:09
- Forum: ESP Easy: General Discussion
- Topic: MQTT app of choice
- Replies: 1
- Views: 1821
MQTT app of choice
What is your favorite MQTT app (on mobile) ?
-D
-D
- 12 Jan 2019, 14:44
- Forum: ESP Easy: Software
- Topic: Strobe light controlled by a rule possible?
- Replies: 6
- Views: 4219
Re: Strobe light controlled by a rule possible?
gpio 15 is pulled to GND and generally recommended for input only
https://espeasy.readthedocs.io/en/lates ... light=gpio
Try another gpio (preferably 5,6,7)
-D
https://espeasy.readthedocs.io/en/lates ... light=gpio
Try another gpio (preferably 5,6,7)
-D
- 11 Jan 2019, 20:47
- Forum: ESP Easy: Software
- Topic: Strobe light controlled by a rule possible?
- Replies: 6
- Views: 4219
Re: Strobe light controlled by a rule possible?
Hello,
the best practice is to send an "event" to the device
http://<espeasyip>/control?cmd=event
Then in the Rules catch the event :
On event do
..
Your condition here
...
endon
More in the Rules :
https://espeasy.readthedocs.io/en/lates ... Rules.html
-D
the best practice is to send an "event" to the device
http://<espeasyip>/control?cmd=event
Then in the Rules catch the event :
On event do
..
Your condition here
...
endon
More in the Rules :
https://espeasy.readthedocs.io/en/lates ... Rules.html
-D
- 11 Jan 2019, 19:16
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
I am having difficulty uploading the MQTT cert file via the <ip>/filelist page. I can upload a .jpg and a .txt but not the TLS.pem, file even after I renamed it to TLS.txt I'm opened /filelist just now from RPIEasy hosted by a Raspberry Pi Zero W. (As browser i used a Firefox v63.0 on a desktop Ubu...
- 11 Jan 2019, 15:37
- Forum: ESP Easy: Hardware
- Topic: sensor - hw-611 e/p 280
- Replies: 6
- Views: 17430
Re: sensor - hw-611 e/p 280
Hello,
BMP280 does only Barometric pressure while the BME280 variant does Barometric, Humidity and Temperature.
The safest way to tell which device you have is by the return values you get.
-D
BMP280 does only Barometric pressure while the BME280 variant does Barometric, Humidity and Temperature.
The safest way to tell which device you have is by the return values you get.
-D
- 11 Jan 2019, 13:19
- Forum: ESP Easy: Projects / Applications
- Topic: Timer
- Replies: 1
- Views: 2638
Re: Timer
Andre, https://espeasy.readthedocs.io/en/latest/Rules/Rules.html Clock#Time= Triggered every minute with day and time like: Mon,12:30 or Tue,14:45. You can define triggers on specific days or all days using ‘All’ for days indicator. You can also use wildcards in the time setting like All,**:00 to ru...
- 11 Jan 2019, 10:17
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
Alexander, Is HTTPS/ TLS a feature you would consider given the ESP82XX limitations do not exist in this approach ? -D Today's commit on github contains preliminary support for SSL at the Controllers. Needs some testing. I am having difficulty uploading the MQTT cert file via the <ip>/filelist page...
- 10 Jan 2019, 19:45
- Forum: ESP Easy: Software
- Topic: Possible to use previoustate in rules ?
- Replies: 4
- Views: 6377
Re: Possible to use previoustate in rules ?
How about ? On WaterLevel#Litres>10 and gpio#13=0 do Not even sure if you can you use AND/OR in the event, but you can try and let us know. If not : On WaterLevel#Litres>10 do If gpio#13=0 gpio,13,1 //status LED gpio,14,0 // status LED Pulse,4,1,500 // pulse solenoid valve 1 endif endon On WaterLeve...
- 10 Jan 2019, 19:19
- Forum: ESP Easy: Software
- Topic: Possible to use previoustate in rules ?
- Replies: 4
- Views: 6377
Re: Possible to use previoustate in rules ?
Hello,
gpiotoggle,<pin#>
will toggle the state of the pin if this is what you are asking ?
-D
gpiotoggle,<pin#>
will toggle the state of the pin if this is what you are asking ?
-D
- 10 Jan 2019, 11:17
- Forum: ESP Easy: Software
- Topic: Rules not working and "how to send data to 3rd party"
- Replies: 7
- Views: 5660
Re: Rules not working and "how to send data to 3rd party"
Being able to pass user_name / password in the SendtoHttp will make a nice "MQTT to HTTP gateway" in the Rules, for devices within the network that do not support MQTTgrovkillen wrote: ↑09 Nov 2018, 17:09 I'm not up to date with the generic http controller. Must look into that.
-D
- 08 Jan 2019, 19:43
- Forum: ESP Easy: General Discussion
- Topic: Help you create the device rules for the following requirements
- Replies: 16
- Views: 13985
Re: Help you create the device rules for the following requirements
On mcp#5 do
Publish,/%sysname%/MCP/5,%eventvalue%
endon
This seems to work...
-D
Publish,/%sysname%/MCP/5,%eventvalue%
endon
This seems to work...
-D
- 08 Jan 2019, 19:33
- Forum: ESP Easy: General Discussion
- Topic: Help you create the device rules for the following requirements
- Replies: 16
- Views: 13985
Re: Help you create the device rules for the following requirements
(I am working on MCP,5) This works : on system#boot do monitor,mcp,5 endon On mcp#5=1 do Publish,/%sysname%/MCP/5,1 endon On mcp#5=0 do Publish,/%sysname%/MCP/5,0 endon Wondering if it is possible to post the value of MCP#5 directly, instead of conditioning ? On mcp#5 do Publish,/%sysname%/MCP/5, <m...
- 08 Jan 2019, 14:13
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
- 08 Jan 2019, 11:25
- Forum: ESP Easy: General Discussion
- Topic: Help you create the device rules for the following requirements
- Replies: 16
- Views: 13985
Re: Help you create the device rules for the following requirements
Yes you can do it using rules. Not super simple (not like a setting) but very much workable. I am thinking something like : on <gpio> do Publish,%sysname%/<gpio>/<pin>,<state> endon So every time any gpio pin changes for any reason from any source, the Rule posts its new value Not sure if this even...
- 07 Jan 2019, 20:30
- Forum: ESP Easy: General Discussion
- Topic: Help you create the device rules for the following requirements
- Replies: 16
- Views: 13985
Re: Help you create the device rules for the following requirements
Ok I understand, but consider using my suggested change in the rule. It'll make it easier to maintain. Is there an option for GPIOs (gpio/pcfgpio/mcpgpio) to publish their state w/o being declared as input switch in the Tasks ? /%sysname%/GPIO/<pin#>, <payload 0 or 1> changes the state of the pin w...
- 07 Jan 2019, 17:20
- Forum: ESP Easy: General Discussion
- Topic: GUI system info not showing the GIT version
- Replies: 3
- Views: 3794
Re: GUI system info not showing the GIT version
Woks for me... I used the precomplied image. https://lh3.googleusercontent.com/ykGAcFc8Cf9PXe-2gZ0Es0-FFATylPVkN2BX62ZvZjhTKZO-jckrcWFFTv2bIfPBx1K3y-XZSWlMKuKkQKWN6EfS-CHEW0BONwNM_jDVJj7OSLKTCZeFxKMXTWw4AfhdnQ0qMTdgIlPvpPWs54V9CWLO6Gg7OjUTBxpycXgzqJ9ASaxsgY8O_DUtg1ugG9sWhTgtRMRsUDHADsbIBOmDjgFeKd5-S...
- 05 Jan 2019, 15:53
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
How can I make ESP auto restart if I reboot PI? Does it work with diet pi? https://lh3.googleusercontent.com/XeUnWdIFfxpeRCDFYgCH7bOepVTCjzVGiwOX-4QhBoQv4Dd1pg9v0TDi4g21PLbMmF6VQzdMsX3yOg0wZqMIYyvEkjt9_yoV_qpTjOf7JXYB8AcvRDRG6XdFHgYLjqJah_FA5-gFswoDdsI4kDYiypZUY-VcQ5_tvV9p9pjW8DXb7gDA85qC26EF683i5o...
- 04 Jan 2019, 16:37
- Forum: ESP Easy: Software
- Topic: Fallback SSID
- Replies: 13
- Views: 7908
Re: Fallback SSID
Let me ask you this: Is there a way to define an IP address for the device when the base SSID address might be different. For example, say I want the device to have a fixed IP nnn.nnn.nnn.19 but my primary SSID hands out 10.0.0.nnn address and my fallback SSID hands back IP of 192.168.1.nnn? I was ...
- 30 Dec 2018, 21:59
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
Alexander,
Is HTTPS/ TLS a feature you would consider given the ESP82XX limitations do not exist in this approach ?
-D
Is HTTPS/ TLS a feature you would consider given the ESP82XX limitations do not exist in this approach ?
-D
- 30 Dec 2018, 20:37
- Forum: ESP Easy: General Discussion
- Topic: NODEmcu and PIR
- Replies: 6
- Views: 4014
Re: NODEmcu and PIR
Check the log (tools tab) when the PIR fires shows there in (almost) real time
-D
-D
- 30 Dec 2018, 20:28
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
On a VM for now, going on an OPi0 tomorrow. -D I forgot to mention, that ESPEasy P2P controller need to be enabled, to join the network, but as i see, it is obvious. :) And as you see, i missed sorting in the unit list, adding it to the issues. Also the "Type" only shows up on RPIEasy nod...
- 30 Dec 2018, 18:58
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
https://lh3.googleusercontent.com/qvogIGNutv-2sVJ0iKOg6M4mXn748KT8zc7J0-VHNEfZDfsBWIbWXKoqOrgSE7zcolxVWNLvSzc_TjMkxLj2rrCoM6JxyJbXuJ7rIPwfa3ca_9A-UC8ZELzRgLT0MP08AbqTXh-zAZUSAiJ8raZuA1jwZjSHPUB4Zk0lWNm3nV6XXCvMnrO6z46Q6iteehUGXRVB4_asFAtoi7YxxEKqllE-_Av88kVngP8Sbg6W8nhhU-PUeZf-FFdh_aMtgdcO2RHouV0N4...
- 30 Dec 2018, 18:40
- Forum: ESP Easy: General Discussion
- Topic: NODEmcu and PIR
- Replies: 6
- Views: 4014
Re: NODEmcu and PIR
Which NodeMCU module are you using ? I have yet to see one w/o 5v support !!
-D
-D
- 30 Dec 2018, 12:13
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 515767
Re: RPIEasy
Good job !!!
-D
-D
- 28 Dec 2018, 10:40
- Forum: ESP Easy: Software
- Topic: Very simple Temperature rule from Wiki not working?
- Replies: 4
- Views: 4420
Re: Very simple Temperature rule from Wiki not working?
Shouldn't it be :
On tempsolar#Temperature>20 do
instead of :
On [tempsolar]#Temperature>20 do
?
-D
On tempsolar#Temperature>20 do
instead of :
On [tempsolar]#Temperature>20 do
?
-D
- 26 Dec 2018, 15:32
- Forum: ESP Easy: Software
- Topic: Read temperature via web command on D1 with SHT30 installed
- Replies: 12
- Views: 7538
Re: Read temperature via web command on D1 with SHT30 installed
Do not forget the custom web pages. Just upload an .htm file (http://ip_of_your_device/upload) that returns just the value you want and then call that file within your call url e.g. : http://<ip of you device/return1.htm -D Interesting. I didn't read about this possibility anything. Do you have som...
- 26 Dec 2018, 12:10
- Forum: ESP Easy: Software
- Topic: ESP Easy local control buttons missing?
- Replies: 4
- Views: 2976
- 26 Dec 2018, 11:04
- Forum: ESP Easy: Software
- Topic: ESP Easy local control buttons missing?
- Replies: 4
- Views: 2976
Re: ESP Easy local control buttons missing?
Would be a good idea (if not a necessity) to have a redirect url/file in the options. (e.g /dashboard.esp)
This way a "customer / third party" would get to see the custom web page with the info that is relevant to them when calling the IP, instead of the main page.
-D
This way a "customer / third party" would get to see the custom web page with the info that is relevant to them when calling the IP, instead of the main page.
-D
- 26 Dec 2018, 10:54
- Forum: ESP Easy: Software
- Topic: Read temperature via web command on D1 with SHT30 installed
- Replies: 12
- Views: 7538
Re: Read temperature via web command on D1 with SHT30 installed
Do not forget the custom web pages.
Just upload an .htm file (http://ip_of_your_device/upload) that returns just the value you want and then call that file within your call url e.g. :
http://<ip of you device/return1.htm
-D
Just upload an .htm file (http://ip_of_your_device/upload) that returns just the value you want and then call that file within your call url e.g. :
http://<ip of you device/return1.htm
-D
- 26 Dec 2018, 10:46
- Forum: ESP Easy: General Discussion
- Topic: State not working??
- Replies: 22
- Views: 13726
Re: State not working??
The "recently" introduced gpio commands : gpiotoggle,<pin number> status,gpio,<pin number> take care of most the issues we used to have in the past given : a. there is no longer a reason to "condition" (if/else) the current state of a pin in order to toggle it gpiotoggle,<pin num...
- 01 Nov 2018, 17:34
- Forum: ESP Easy: Software
- Topic: Get GPIO Status without declaring it as input under devices ?
- Replies: 1
- Views: 1629
Re: Get GPIO Status without declaring it as input under devices ?
To answer my own Q.
status,gpio,<pin number> returns the status even if it is not declared in the devices as input.
It only returns "?" if the gpio has not been triggered since boot (still in float state ?)
If you call it once either high or low it will then return it's status.
-D
status,gpio,<pin number> returns the status even if it is not declared in the devices as input.
It only returns "?" if the gpio has not been triggered since boot (still in float state ?)
If you call it once either high or low it will then return it's status.
-D
- 29 Oct 2018, 08:58
- Forum: ESP Easy: Software
- Topic: Get GPIO Status without declaring it as input under devices ?
- Replies: 1
- Views: 1629
Get GPIO Status without declaring it as input under devices ?
status,gpio,<pin number> responds a "?" if the pin is not declared in the devices / tasks.
No problem doing so but this ends up "eating up" one the only 12 available tasks.
Thanx
-D
No problem doing so but this ends up "eating up" one the only 12 available tasks.
Thanx
-D
- 26 Jul 2017, 11:28
- Forum: ESP Easy: General Discussion
- Topic: WiFi Direct Connection
- Replies: 17
- Views: 13220
Re: WiFi Direct Connection
A standalone AP functionality is needed in case you want to use the ESP as a controller in a location w/o internet. I once had to compare 2 temperatures and turn on/off a circulator pump based on a simple rule. No internet no other nodes just a rule with the unit in AP mode just for management once ...
- 15 Jan 2017, 15:29
- Forum: ESP Easy: General Discussion
- Topic: delete a Device ?
- Replies: 5
- Views: 6304
Re: delete a Device ?
In the espaeasy mega (for 4M devices) there is a 'Disable" checkmark if you want to "temporarily" disable that device w/o deleting it (and loosing the relevant properties)belgo wrote:thanks a lot !! that's work
- 14 Jan 2017, 22:50
- Forum: ESP Easy: General Discussion
- Topic: delete a Device ?
- Replies: 5
- Views: 6304
Re: delete a Device ?
In Domoticz / Steup / Hardware
The Delete button will become active once you click on the selected entry
-D
The Delete button will become active once you click on the selected entry
-D
- 07 Jan 2017, 17:49
- Forum: ESP Easy: General Discussion
- Topic: Simple switch issues
- Replies: 4
- Views: 3680
Re: Simple switch issues
What ESP module are you on ?