Search found 3621 matches
- 02 Feb 2020, 20:51
- Forum: ESP Easy: Hardware
- Topic: Shelly 1 +Temperature Shield
- Replies: 8
- Views: 13787
Re: Shelly 1 +Temperature Shield
And you have tried all the GPIOs? Sounds simple enough since it's only one pin you have to get right.
- 31 Jan 2020, 09:36
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy Flasher
- Replies: 152
- Views: 224012
Re: ESP Easy Flasher
nice tool. i use it a lot since it is really fast to flash standard esp builds especially the post stuff like SSID and wpa2 key are nice i have wpa2 with special characters and they do not get accepted by the esp setup page but i can send it easilly to the esp with the flasher tool thanks Thanks fo...
- 30 Jan 2020, 19:01
- Forum: ESP Easy: Projects / Applications
- Topic: How to log fridges temp remotely and send mail if alarm ?
- Replies: 9
- Views: 17665
Re: How to log fridges temp remotely and send mail if alarm ?
You could use the 16 variables inside the unit and have them graph the latest 8 days highs and lows or so...? HTML the chart inside the email.
Regarding IP, I wouldn't know.
Regarding IP, I wouldn't know.
- 30 Jan 2020, 09:59
- Forum: ESP Easy: Projects / Applications
- Topic: How to log fridges temp remotely and send mail if alarm ?
- Replies: 9
- Views: 17665
Re: How to log fridges temp remotely and send mail if alarm ?
How derailed chart are we talking about?
- 30 Jan 2020, 04:21
- Forum: ESP Easy: Projects / Applications
- Topic: How to log fridges temp remotely and send mail if alarm ?
- Replies: 9
- Views: 17665
Re: How to log fridges temp remotely and send mail if alarm ?
If you use Gmail you can use the server: aspmx.l.google.com Only thing to know though, you can only send to other Gmail addresses (or G suite). But, you could have an account which would have a rule to forward the received email to an "external" address. See, restricted SMTP options here: ...
- 26 Jan 2020, 19:37
- Forum: ESP Easy: Software
- Topic: Deepsleep-Mode with Timer?
- Replies: 1
- Views: 4216
Re: Deepsleep-Mode with Timer?
Yep, use rules.
- 22 Jan 2020, 19:27
- Forum: ESP Easy: General Discussion
- Topic: rules calculate time difference in milliseconds
- Replies: 10
- Views: 8962
Re: rules calculate time difference in milliseconds
Same here, only seconds officially.
- 22 Jan 2020, 19:27
- Forum: ESP Easy: General Discussion
- Topic: Sensorupdate faster than 1 second?
- Replies: 6
- Views: 9289
Re: Sensorupdate faster than 1 second?
You would need to compile that yourself then. Currently only once per second for the official builds.
- 22 Jan 2020, 19:23
- Forum: ESP Easy: Projects / Applications
- Topic: Two way switch for light
- Replies: 6
- Views: 17029
Re: Two way switch for light
Yes it was completely wrong but got you doing the digging yourself. Good on you!
And to my defence, I wrote that rule out of memory, on my phone.
And to my defence, I wrote that rule out of memory, on my phone.
- 22 Jan 2020, 16:25
- Forum: ESP Easy: General Discussion
- Topic: Dallas DS18b20 strage behaviour
- Replies: 11
- Views: 9782
Re: Dallas DS18b20 strage behaviour
Can you please get more info for us to work with? How are the sensor powered etc?
- 22 Jan 2020, 15:38
- Forum: ESP Easy: General Discussion
- Topic: Dallas DS18b20 strage behaviour
- Replies: 11
- Views: 9782
Re: Dallas DS18b20 strage behaviour
Are the wires twisted?
- 22 Jan 2020, 14:03
- Forum: ESP Easy: General Discussion
- Topic: Dallas DS18b20 strage behaviour
- Replies: 11
- Views: 9782
Re: Dallas DS18b20 strage behaviour
And you know the signal is good enough? How long are the cables etc?
- 22 Jan 2020, 12:44
- Forum: ESP Easy: General Discussion
- Topic: Dallas DS18b20 strage behaviour
- Replies: 11
- Views: 9782
Re: Dallas DS18b20 strage behaviour
Version?
- 20 Jan 2020, 22:58
- Forum: ESP Easy: General Discussion
- Topic: Using curl/http to read a value of a ds18b20
- Replies: 5
- Views: 7011
Re: Using curl/http to read a value of a ds18b20
The latest are really stable but be aware the that the config isn't compatible with the R147 version so make sure you take the settings some other way (screenshots or notes).
- 20 Jan 2020, 21:42
- Forum: ESP Easy: Software
- Topic: Change PWM Frequency ?
- Replies: 38
- Views: 53471
Re: Change PWM Frequency ?
Why not have a rule that trigger a relay in the case of PWM set to 0?
- 20 Jan 2020, 21:37
- Forum: ESP Easy: Hardware
- Topic: SHT3x - no readings
- Replies: 8
- Views: 12865
- 20 Jan 2020, 21:35
- Forum: ESP Easy: General Discussion
- Topic: Using curl/http to read a value of a ds18b20
- Replies: 5
- Views: 7011
Re: Using curl/http to read a value of a ds18b20
http://192.168.178.246/json?tasknr=1
Will filter the json.
See more URL filters here: https://github.com/letscontrolit/ESPEas ... ON.ino#L12
PS. By the looks of your json string it seems to me you're running an old version?
Will filter the json.
See more URL filters here: https://github.com/letscontrolit/ESPEas ... ON.ino#L12
PS. By the looks of your json string it seems to me you're running an old version?
- 20 Jan 2020, 18:11
- Forum: ESP Easy: Hardware
- Topic: SHT3x - no readings
- Replies: 8
- Views: 12865
Re: SHT3x - no readings
Then it's up to you to find any hardware errors...?
- 20 Jan 2020, 16:26
- Forum: ESP Easy: Hardware
- Topic: SHT3x - no readings
- Replies: 8
- Views: 12865
Re: SHT3x - no readings
Does the i2c scanner (found under tools) show the sensor?
- 20 Jan 2020, 16:24
- Forum: ESP Easy: General Discussion
- Topic: Using curl/http to read a value of a ds18b20
- Replies: 5
- Views: 7011
Re: Using curl/http to read a value of a ds18b20
Use the json endpoint?
- 19 Jan 2020, 12:22
- Forum: Introduce yourself
- Topic: Hi all from Spain
- Replies: 1
- Views: 6473
Re: Hi all from Spain
Welcome and thank's for the feedback
- 18 Jan 2020, 22:21
- Forum: ESP Easy: Software
- Topic: value with the date and time.
- Replies: 5
- Views: 5293
Re: value with the date and time.
You might need to have it as URL syntax?
- 18 Jan 2020, 22:18
- Forum: ESP Easy: Projects / Applications
- Topic: Two way switch for light
- Replies: 6
- Views: 17029
Re: Two way switch for light
In you case you could simplify like this perhaps: On System#Boot Do Monitor,GPIO,12 Monitor,GPIO,14 EndOn On GPIO#12 Do Let,12,%eventvalue% Let,1,[INT#12]*[INT#14] EndOn On GPIO#14 Do Let,14,%eventvalue% Let,1,[INT#12]*[INT#14] Endon On msg Do Let,2,%eventvalue% Event,ToggleSwitch EndOn On ToggleSwi...
- 17 Jan 2020, 10:13
- Forum: ESP Easy: Software
- Topic: Mega (V2.0.0) OTA firmware updates on 1MB modules
- Replies: 47
- Views: 34187
Re: Mega (V2.0.0) OTA firmware updates on 1MB modules
Well I think it is working work OTA now but since I'm doing 100% development of the new GUI as of the last 4-5 month I haven't been testing any new firmware stuff. Perhaps @TD-er can shed some light?
- 14 Jan 2020, 19:49
- Forum: ESP Easy: General Discussion
- Topic: Rules HTTP call
- Replies: 6
- Views: 6621
- 13 Jan 2020, 22:36
- Forum: ESP Easy: General Discussion
- Topic: Rules HTTP call
- Replies: 6
- Views: 6621
Re: Rules HTTP call
The reason is that it will make the rules engine parser more reliable.
- 13 Jan 2020, 22:15
- Forum: ESP Easy: General Discussion
- Topic: Rules HTTP call
- Replies: 6
- Views: 6621
Re: Rules HTTP call
You can either check/uncheck the tolerant rules option under "advanced" or enclose the entire thing with '
- 12 Jan 2020, 23:30
- Forum: ESP Easy: Hardware
- Topic: Sonoff new board flashing
- Replies: 5
- Views: 8745
Re: Sonoff new board flashing
You need to turn off the serial (set in the advanced section) and configure it like any other device (set it up on the device page,).
- 12 Jan 2020, 22:10
- Forum: ESP Easy: Hardware
- Topic: Sonoff new board flashing
- Replies: 5
- Views: 8745
- 12 Jan 2020, 19:14
- Forum: ESP Easy: Hardware
- Topic: Sonoff new board flashing
- Replies: 5
- Views: 8745
Re: Sonoff new board flashing
That version should work. What tutorials do you use?
- 12 Jan 2020, 02:55
- Forum: ESP Easy: Hardware
- Topic: time relay 2 canal
- Replies: 7
- Views: 9801
Re: time relay 2 canal
No need for that.christianh wrote: ↑12 Jan 2020, 00:07 Your are joking Guy..... Whats you thougt have eine at least...,.
You linked to a firmware which isn't ours... What's the plan? Are you going to use ESP Easy or not?
- 11 Jan 2020, 13:01
- Forum: ESP Easy: Hardware
- Topic: time relay 2 canal
- Replies: 7
- Views: 9801
Re: time relay 2 canal
Ok, that's good. Then you need to have a serial adapter to program it.
- 10 Jan 2020, 18:06
- Forum: ESP Easy: Hardware
- Topic: time relay 2 canal
- Replies: 7
- Views: 9801
Re: time relay 2 canal
You need to look and see if the memory is 1MB or 512kB
- 10 Jan 2020, 17:15
- Forum: ESP Easy: Hardware
- Topic: time relay 2 canal
- Replies: 7
- Views: 9801
Re: time relay 2 canal
You're trying to install ESP Easy or what?
- 07 Jan 2020, 16:09
- Forum: ESP Easy: General Discussion
- Topic: Hardware Watchdog Reboots
- Replies: 219
- Views: 246487
- 07 Jan 2020, 12:37
- Forum: ESP Easy: Software
- Topic: LWT messages how often
- Replies: 1
- Views: 4060
Re: LWT messages how often
LWT is a message that the broker will send when it hasn't heard from the client within set amount of seconds. You should probably look into having the unit publish a "ping" message. This can be done using rules or a switch plugin (set it to a none used GPIO and interval of let's say 30 sec...
- 06 Jan 2020, 20:18
- Forum: ESP Easy: General Discussion
- Topic: Hardware Watchdog Reboots
- Replies: 219
- Views: 246487
Re: Hardware Watchdog Reboots
Thanks for the feedback. Have you looked at the new GUI we're creating?
- 06 Jan 2020, 04:54
- Forum: Introduce yourself
- Topic: a beginner from italy
- Replies: 1
- Views: 6489
Re: a beginner from italy
Welcome to the community
- 03 Jan 2020, 21:40
- Forum: ESP Easy: Projects / Applications
- Topic: Digital Wireless WiFi Smart Programmable Thermostat
- Replies: 7
- Views: 14804
Re: Digital Wireless WiFi Smart Programmable Thermostat
Why don't just contact the manufacturer about the wish of having ESP Easy working with their hardware. We only need to know the communication and we'd be able to add it as a plugin. You'd be surprised over how well willingly many companies are.
- 03 Jan 2020, 10:04
- Forum: ESP Easy: Hardware
- Topic: WIFI : Disconnected! Reason: '(200) Beacon timeout'
- Replies: 74
- Views: 145614
Re: WIFI : Disconnected! Reason: '(200) Beacon timeout'
Have you tried the latest release?
- 02 Jan 2020, 15:29
- Forum: ESP Easy: General Discussion
- Topic: Pulse: no event for first status change?
- Replies: 1
- Views: 3906
Re: Pulse: no event for first status change?
Yes that would be expected. Please open a new issue on GitHub.
- 01 Jan 2020, 17:45
- Forum: ESP Easy: General Discussion
- Topic: MQTT and SYSLOG
- Replies: 5
- Views: 6548
Re: MQTT and SYSLOG
What's the problem with MQTT? If you connect to the broker with a client app, do that work?
- 29 Dec 2019, 19:52
- Forum: ESP Easy: General Discussion
- Topic: Pulse GPIO problem (stuck-reboot)
- Replies: 5
- Views: 5505
Re: Pulse GPIO problem (stuck-reboot)
The settings of the R version isn't compatible with the new version. You need to flash a blank before the new flash. Remember to write the settings down.
- 29 Dec 2019, 16:43
- Forum: ESP Easy: General Discussion
- Topic: Pulse GPIO problem (stuck-reboot)
- Replies: 5
- Views: 5505
Re: Pulse GPIO problem (stuck-reboot)
The R120 version is not ideal when doing pulse. You say it should put GPIO 13 to high for 500 seconds. And since that version is really old and not well planned it's blocking, meaning that it will just idle for that period... I suggest you install latest version from GitHub. Edit: I misunderstood, b...
- 28 Dec 2019, 15:11
- Forum: ESP Easy: General Discussion
- Topic: MQ-7 support
- Replies: 8
- Views: 16634
Re: MQ-7 support
The formula is up to you to create, it's a specific field that you can use for that.
- 26 Dec 2019, 19:00
- Forum: ESP Easy: Software
- Topic: Turn on a GPIO every minute for 5 seconds. what am I doing wrong
- Replies: 13
- Views: 10485
Re: Turn on a GPIO every minute for 5 seconds. what am I doing wrong
You would use dummy variables. And you can use clock together with timers. So it's really up to you what your plans look like. You have the week day number that you can use and for each Monday you add one to the dummy. When it's = 4 you execute the code. Next Monday you reset it to 1.
- 26 Dec 2019, 18:58
- Forum: ESP Easy: Software
- Topic: wie kann ich 3 Unterschiedliche MQTT Server unter rulseinzeln ansprechen
- Replies: 5
- Views: 5846
Re: wie kann ich 3 Unterschiedliche MQTT Server unter rulseinzeln ansprechen
Yes maybe. We have a lot on our plate at the moment. It's not part of the to-do list for the next version. I
- 26 Dec 2019, 16:46
- Forum: ESP Easy: Software
- Topic: wie kann ich 3 Unterschiedliche MQTT Server unter rulseinzeln ansprechen
- Replies: 5
- Views: 5846
Re: wie kann ich 3 Unterschiedliche MQTT Server unter rulseinzeln ansprechen
Ok I understand but that is not currently possible with one unit.
- 26 Dec 2019, 16:45
- Forum: ESP Easy: Software
- Topic: Turn on a GPIO every minute for 5 seconds. what am I doing wrong
- Replies: 13
- Views: 10485
Re: Turn on a GPIO every minute for 5 seconds. what am I doing wrong
Either use a timer or use the syntax **:** which will trigger every minute.
- 26 Dec 2019, 04:52
- Forum: ESP Easy: Software
- Topic: Limited number of devices to choose of
- Replies: 6
- Views: 6140
Re: Limited number of devices to choose of
Since you're compiling a custom version you need to add the plugins you want. But it sounds to me that you should go with our release bins instead.