I have send you an email.. we should be able to add support for these sensors soon..

Check your email for a test version..

Hi,
Yes, lets solve this

What RF receiver are you using?

Must be an old version of the document..

HUM=99 => Humidity (decimal value: 0-100 to indicate relative humidity in %)

There is also a (theoretical) possibility that you connect the data line of an RF send unit to VCC which will result in a RF signal jammer. Disturbing all RF signals in the area.. including alarm sensors.. In fact, that is more likely to happen than the existence of backdoors in any RF gateways. Whi...

Ok, please check what command is displayed when RFlink receives the small buttons..

Hi, I think support for nearly every button type is implemented. On/Off/Dimming is all there. The mood buttons are translated to a "mood=xx" command which is not supported by Domoticz at the moment. Mainly because I have no idea what the correct use would be. So lets start by defining what...

A few issues were mentioned: Source code: Publishing and/or keeping the source code on sourceforge up-to-date does not have a priority right now. Sourceforge is used as a means to publish and is no longer used as development tool since the major downtime of Sourceforge some time ago. We prefer to pu...

No that is not possible.
When you pair them, they all get the same id and send out the exact same signal.

Of course ecman was using a 315 mhz module..

The latest public source code is available here: https://sourceforge.net/projects/rflink/ Note that this is not the same version as the latest release. It is however all you need to develop and test your own plugins. If you are interested in joining the development team you can send a mail to frankz...

To run the RFLink firmware you need an Arduino Mega board! We have selected this specicif board for various reasons. Like memory size and processing power, future extension plans etc. Technically it would be possible to strip the code, leave out a lot of the plugins and put that on a smaller Arduino...

Download AVRDude compatible with your OS. Like from here: http://download.savannah.gnu.org/releases/avrdude/ Get the latest rflink.cpp.hex fro mthe RFLink firmware archive. use the following command: But before you do, make sure you select the correct serial port. by replacing the "serialport&q...

It is under investigation but I could use help with some testing..

Lets add support for it.. I have send you a message..

Hi,

Any idea of the brand/model of your set?

Hi,

Make a log of the remote control signal as described here:
http://www.nemcon.nl/blog2/2015/07/cc

and we will add support for it.
Protocol details are known so ti should not take long.

Sorry, there were some mistakes introduced in the schematics when they were last updated with the RBX6 details.
Indeed pin 10 should go to vcc.
The page has been updated.

We will check your data and have several fixes waiting already.

Thanks.
We are working on adding Livolo support

If you have a device that is not yet supported you can do the following to help us. Launch RFlink Loader (or any terminal program) Just select the correct serial port to which your Arduino/RFLink is connected and press the [Serial Port Logging] button. Then also press the button [Log Mode: Debug] Th...

The RFLink support forum @ Domoticz is for Domoticz users. However, RFLink also works with other Home Automation systems (Jeedom, Pimatic, Domotiga and more are in progress) So it made sense to get our own place and we found a spot on this server :) In the coming days we are going to restructure thi...