Why different codes in debug log on Watts Clever Sockets

[digger]

Hi all,

Just trying to understand how it all works. I have some watts clever power sockets, which I think are unsupported (unless after a different name).

http://www.wattsclever.com/gb/products/easy-off-sockets

What I don't understand is that when I run the debug and grab the data transmitted from the control button/s, the received data will vary from push to push from the same button, even though the socket 1 "on" button has one purpose and that is to turn on the socket. Because of this it is recognized as different products as well.

Is this an expected outcome for a non-supported device or does the different received codes indicate an issue with my RX board due to noise or such? Just trying to understand why the code would vary?

[Stuntteam]

Hard to tell without seeing the debug log..
can you mail it to frankzirrone@gmail.com or post it here

[digger]

Thanks

Will grab some data over the weekend and post.

[digger]

This is the first button.
Watts Clever Power Sockets
Socket 1 On

This the output from several button pushes

Cheers

20;35;DEBUG;Pulses=52;Pulses(uSec)=60,1440,360,690,360,660,330,690,960,90,360,660,330,690,960,90,960,90,930,90,930,90,300,720,930,90,930,120,300,720,330,720,930,120,300,720,300,720,300,720,300,720,930,120,930,120,930,120,300,720,300,6990;
20;36;DEBUG;Pulses=50;Pulses(uSec)=360,750,270,750,270,750,900,150,270,750,270,750,870,150,900,150,870,150,870,180,270,780,870,150,870,180,240,780,240,780,870,180,240,780,240,780,240,780,240,780,870,180,870,180,870,180,240,780,240,6990;
20;37;Eurodomest;ID=0ec26f;SWITCH=00;CMD=OFF;
20;38;DEBUG;Pulses=52;Pulses(uSec)=30,150,360,660,360,660,330,690,960,90,360,660,390,660,960,90,960,90,960,90,960,90,330,720,930,90,930,120,300,720,330,690,930,120,300,720,330,720,300,720,300,720,930,120,930,120,930,120,270,750,300,6990;
20;39;DEBUG;Pulses=52;Pulses(uSec)=30,600,510,510,480,570,420,630,1020,30,390,630,420,630,1020,30,990,60,1020,30,990,60,360,660,960,90,960,90,300,720,330,690,960,90,330,690,330,690,330,690,330,690,930,90,930,120,930,120,300,720,300,6990;
20;3A;DEBUG;Pulses=50;Pulses(uSec)=330,750,270,750,270,750,900,150,270,750,270,750,900,150,900,150,900,150,900,150,270,750,870,150,870,150,240,780,270,780,870,180,240,780,240,780,240,780,270,780,870,180,870,180,870,180,240,780,240,6990;
20;3B;Eurodomest;ID=0ec26f;SWITCH=00;CMD=OFF;
20;3C;DEBUG;Pulses=36;Pulses(uSec)=1020,30,990,60,990,60,360,660,960,60,960,90,330,690,330,690,930,90,330,690,330,720,330,690,330,690,930,90,930,90,930,120,330,720,300,6990;
20;3D;DEBUG;Pulses=50;Pulses(uSec)=360,750,270,750,270,750,900,150,270,750,270,750,900,150,900,150,900,150,900,150,270,750,870,150,870,150,270,750,270,750,870,150,270,780,240,780,240,780,270,780,870,150,870,150,870,180,240,780,240,6990;
20;3E;Eurodomest;ID=0ec26f;SWITCH=00;CMD=OFF;
20;3F;DEBUG;Pulses=36;Pulses(uSec)=1020,30,960,60,960,60,360,660,990,60,960,90,330,690,360,660,930,90,330,690,330,720,300,720,330,690,930,90,930,90,930,90,330,720,300,6990;
20;40;DEBUG;Pulses=50;Pulses(uSec)=360,750,270,750,270,750,900,150,270,750,270,750,900,150,900,150,900,150,870,150,270,750,870,150,870,150,240,780,240,780,870,150,270,780,240,780,240,780,240,780,870,180,870,180,870,180,240,780,240,6990;
20;41;Eurodomest;ID=0ec26f;SWITCH=00;CMD=OFF;