Let's Control It

Posted: **15 Nov 2017, 14:57**

Hi,
When I press a Blyss push button, the transmission is either recognised as Blyss or V2phoenix

Wed Nov 15 2017 14:48:38 GMT+0100 (CET) - Send Value : 20;FB;V2Phoenix;ID=be6040d;SWITCH=08;CMD=ON;
Wed Nov 15 2017 14:48:38 GMT+0100 (CET) - Send Value : 20;FC;V2Phoenix;ID=966040d;SWITCH=08;CMD=ON;
Wed Nov 15 2017 14:48:38 GMT+0100 (CET) - Send Value : 20;FD;V2Phoenix;ID=de6040d;SWITCH=08;CMD=ON;
Wed Nov 15 2017 14:48:38 GMT+0100 (CET) - Send Value : 20;FE;V2Phoenix;ID=9e6040d;SWITCH=08;CMD=ON;
Wed Nov 15 2017 14:48:38 GMT+0100 (CET) - Send Value : 20;FF;V2Phoenix;ID=be6040d;SWITCH=08;CMD=ON;
Wed Nov 15 2017 14:48:39 GMT+0100 (CET) - Send Value : 20;00;V2Phoenix;ID=9e6040d;SWITCH=08;CMD=ON;
Wed Nov 15 2017 14:48:42 GMT+0100 (CET) - Send Value : 20;01;Blyss;ID=040d;SWITCH=G1;CMD=ON;

It's not related to distance. What more info can I give you ?
(I'm using rflink with a jeedom install)

cheers,
.vince

Posted: **16 Nov 2017, 21:12**

It does the same with other switches.

Code: Select all

Thu Nov 16 2017 21:09:56 GMT+0100 (CET) - Send Value : 20;02;V2Phoenix;ID=fa1c528;SWITCH=08;CMD=ON;
Thu Nov 16 2017 21:09:56 GMT+0100 (CET) - Send Value : 20;03;V2Phoenix;ID=861c528;SWITCH=08;CMD=ON;
Thu Nov 16 2017 21:09:56 GMT+0100 (CET) - Send Value : 20;04;V2Phoenix;ID=0a1c528;SWITCH=08;CMD=ON;
Thu Nov 16 2017 21:09:56 GMT+0100 (CET) - Send Value : 20;05;V2Phoenix;ID=be1c528;SWITCH=08;CMD=ON;
Thu Nov 16 2017 21:09:56 GMT+0100 (CET) - Send Value : 20;06;V2Phoenix;ID=be1c528;SWITCH=08;CMD=ON;
Thu Nov 16 2017 21:10:03 GMT+0100 (CET) - Send Value : 20;07;Blyss;ID=c528;SWITCH=B1;CMD=ON;

strange behaviour...

Let's Control It

Blyss & V2phoenix protocols mixing up

Blyss & V2phoenix protocols mixing up

Re: Blyss & V2phoenix protocols mixing up