Blyss & V2phoenix protocols mixing up
Posted: 15 Nov 2017, 14:57
Hi,
When I press a Blyss push button, the transmission is either recognised as Blyss or V2phoenix
It's not related to distance. What more info can I give you ?
(I'm using rflink with a jeedom install)
cheers,
.vince
When I press a Blyss push button, the transmission is either recognised as Blyss or V2phoenix
Code: Select all
Wed Nov 15 2017 14:48:38 GMT+0100 (CET) - Send Value : 20;FB;V2Phoenix;ID=be6040d;SWITCH=08;CMD=ON;
Wed Nov 15 2017 14:48:38 GMT+0100 (CET) - Send Value : 20;FC;V2Phoenix;ID=966040d;SWITCH=08;CMD=ON;
Wed Nov 15 2017 14:48:38 GMT+0100 (CET) - Send Value : 20;FD;V2Phoenix;ID=de6040d;SWITCH=08;CMD=ON;
Wed Nov 15 2017 14:48:38 GMT+0100 (CET) - Send Value : 20;FE;V2Phoenix;ID=9e6040d;SWITCH=08;CMD=ON;
Wed Nov 15 2017 14:48:38 GMT+0100 (CET) - Send Value : 20;FF;V2Phoenix;ID=be6040d;SWITCH=08;CMD=ON;
Wed Nov 15 2017 14:48:39 GMT+0100 (CET) - Send Value : 20;00;V2Phoenix;ID=9e6040d;SWITCH=08;CMD=ON;
Wed Nov 15 2017 14:48:42 GMT+0100 (CET) - Send Value : 20;01;Blyss;ID=040d;SWITCH=G1;CMD=ON;
(I'm using rflink with a jeedom install)
cheers,
.vince