Controlling RFLink (Somfy, 433Mhz) with IP control

Moderators: BertB, rtenklooster, Voyager, Stuntteam, Martinus

Post Reply
Message
Author
username
Normal user
Posts: 5
Joined: 22 Nov 2017, 00:22

Controlling RFLink (Somfy, 433Mhz) with IP control

#1 Post by username » 23 Nov 2017, 10:14

Hi guys,

Who has Somfy RTS electric motors with 433Mhz connected to the intranet (not internet)?
I aim for using Openremote (Linux) for controlling the blinds with IP control, instead than the remote control.

This is my current remote control:
http://www.spec-net.com.au/press/0611/i ... _img03.jpg

This is what I found about controlling the motors with IP:
https://www.somfypro.com/documents/5316 ... ctions.pdf and https://www.nodo-shop.nl/nl/rflink-gate ... kabel.html

The following IP control manual shows I want to control the blinds:
http://dune-hd.com/support/ip_control/d ... erview.txt

I see solutions with all sorts of products connected: http://www.rflink.nl/blog2/wiring

But hey that seems to be really complicated with all sorts of controllers and bridges. I aim for a simple with rather one product.

Who at this forum has experience with this, or has the same endeavour :-)

username
Normal user
Posts: 5
Joined: 22 Nov 2017, 00:22

Re: Controlling RFLink (Somfy, 433Mhz) with IP control

#2 Post by username » 23 Nov 2017, 21:28

Nobody has any experience with and RFLink to IP Control? Can hardly believe this!

TD-er
Normal user
Posts: 359
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: Controlling RFLink (Somfy, 433Mhz) with IP control

#3 Post by TD-er » 23 Nov 2017, 21:44

Not everyone is F5'ing this forum all day, only some ;)

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests