Controlling RFLink (Somfy, 433Mhz) with IP control
Posted: 23 Nov 2017, 10:14
Hi guys,
Who has Somfy RTS electric motors with 433Mhz connected to the intranet (not internet)?
I aim for using Openremote (Linux) for controlling the blinds with IP control, instead than the remote control.
This is my current remote control:
http://www.spec-net.com.au/press/0611/i ... _img03.jpg
This is what I found about controlling the motors with IP:
https://www.somfypro.com/documents/5316 ... ctions.pdf and https://www.nodo-shop.nl/nl/rflink-gate ... kabel.html
The following IP control manual shows I want to control the blinds:
http://dune-hd.com/support/ip_control/d ... erview.txt
I see solutions with all sorts of products connected: http://www.rflink.nl/blog2/wiring
But hey that seems to be really complicated with all sorts of controllers and bridges. I aim for a simple with rather one product.
Who at this forum has experience with this, or has the same endeavour
Who has Somfy RTS electric motors with 433Mhz connected to the intranet (not internet)?
I aim for using Openremote (Linux) for controlling the blinds with IP control, instead than the remote control.
This is my current remote control:
http://www.spec-net.com.au/press/0611/i ... _img03.jpg
This is what I found about controlling the motors with IP:
https://www.somfypro.com/documents/5316 ... ctions.pdf and https://www.nodo-shop.nl/nl/rflink-gate ... kabel.html
The following IP control manual shows I want to control the blinds:
http://dune-hd.com/support/ip_control/d ... erview.txt
I see solutions with all sorts of products connected: http://www.rflink.nl/blog2/wiring
But hey that seems to be really complicated with all sorts of controllers and bridges. I aim for a simple with rather one product.
Who at this forum has experience with this, or has the same endeavour