Hi all,
Until now I used my RFlink in combination with domoticz.
Currently I am wondering if I also can use RFlink stand alone with a little help from esp easy.
My RFlink is connected to an ESP-01 device so that it is WiFi enabled.
What I want to do: send command to RFlink (trigger)
Response:
1) send another command
2) send IR code using esp easy
3) turn an output pin on the RFlink high.
Is this possible stand alone? That saves me an extra RPI
Stand alone RFlink
Moderators: rtenklooster, Voyager, BertB, Stuntteam
Re: Stand alone RFlink
Using RFLink with ESP Easy can run as a standalone unit.
But features are limited to what you can do with rules.
Sample:
But features are limited to what you can do with rules.
Sample:
Code: Select all
on !RFLink#NewKaku;ID=12345678;SWITCH=2;CMD=ON; do
SerialSend 10;NewKaku;1234abcd;2;ON;
SerialSend 10;NewKaku;1234abcd;3;ON;
endon
-
- Normal user
- Posts: 66
- Joined: 16 Feb 2017, 09:23
Re: Stand alone RFlink
thank you very much! works like a charm
Who is online
Users browsing this forum: No registered users and 48 guests