Debugging levels changes after toggling higher level and back.

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Forum rules
You have entered the experimental forum, beware!!!
Post Reply
Message
Author
User avatar
pwassink
Normal user
Posts: 60
Joined: 31 Oct 2016, 08:33
Location: Vorden NL

Debugging levels changes after toggling higher level and back.

#1 Post by pwassink » 02 Apr 2018, 14:14

Hi,

Might have found a little bug.

I have an esp32 for testing also on esp-easy, and have another mega node using global-sync / easy udp p2p.
i saw that there was a difference in how that displayed the incoming (udp messages) outside Temperature.
Checked the debug-level settings of the web interface i was using and put an freshly updated nodemcu / esp12E
running a fresh mega-20180402 normal 4Mb version on the same settings which did not give me that messages

Message example, containing measurement from another ESP in the shed, which also measures outside temp.

EVENT:Grond#Temperature=11.2

When the web-log-interface debuglevel was put on INFO setting the MEGA esp8266 did not display that message, the esp32 did,
but then i toggled the esp8266 Mega-running one up to the level: Debug-More and they appeared, including a lot of other detailed messages.
the strange thing was discovered when i toggled that debug-level setting back to INFO i still had the EVENT: messages in my web-log-screen.

Reboot did not change anything, it seems there is something altered in the message display filter or at least it displays other values
than before the setting changes to a higher level and was then toggled back to the INFO debug level.

I do love the changed logging, it is much more clear and easier to read when looking for specific info,
and hope i explained well enough what was happening, anyone capable of recreating this same behaviour ?

Peter

User avatar
budman1758
Normal user
Posts: 301
Joined: 15 Apr 2017, 05:13
Location: Riverside CA USA

Re: Debugging levels changes after toggling higher level and back.

#2 Post by budman1758 » 03 Apr 2018, 07:37

Its best to put bug reports on Github. Easier for the Devs to find them there.
https://github.com/letscontrolit/ESPEasy
"The glass is twice as big as it needs to be".

User avatar
pwassink
Normal user
Posts: 60
Joined: 31 Oct 2016, 08:33
Location: Vorden NL

Re: Debugging levels changes after toggling higher level and back.

#3 Post by pwassink » 04 Apr 2018, 10:34

You are right,

And it will probably end there, but it will be more reassuring for me, and a lot less load on development
if it has been confirmed by more users having these same symptoms ?

User avatar
grovkillen
Core team member
Posts: 3621
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden
Contact:

Re: Debugging levels changes after toggling higher level and back.

#4 Post by grovkillen » 04 Apr 2018, 11:59

Yes, no problem with that approach :)
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:

Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests