ESP32 boards

Moderators: BertB, Voyager, Stuntteam, Martinus, LisaM

Message
Author
AndrewJ
Normal user
Posts: 223
Joined: 14 Feb 2017, 12:38

Re: ESP32 boards

#101 Post by AndrewJ » 09 Jan 2018, 17:25

Hi Lisa,
Just thought I'd post a screen shot of uPyEasy on my Lolin32 Lite board, working with three DS18B20 sensors (it seems these have to be on separate pins) and a BME280 showing all three readings (temperature, humidity, and pressure) and running nice and stable. :)
It starts automatically, thanks to BertB for his suggestion to add a main.py file. :)
Still using port 9000.

Thanks for all the hard work you have been putting in. :) Please continue, within the time you have available, and let me know if I can help at all.

AndrewJ

Devices with 3xDS18B20 and BME280.PNG
Devices with 3xDS18B20 and BME280.PNG (33.36 KiB) Viewed 1028 times

LisaM
Normal user
Posts: 491
Joined: 11 Apr 2017, 18:29

Re: ESP32 boards

#102 Post by LisaM » 09 Jan 2018, 18:38

AndrewJ wrote:
09 Jan 2018, 17:25
Hi Lisa,
Just thought I'd post a screen shot of uPyEasy on my Lolin32 Lite board, working with three DS18B20 sensors (it seems these have to be on separate pins) and a BME280 showing all three readings (temperature, humidity, and pressure) and running nice and stable. :)
It starts automatically, thanks to BertB for his suggestion to add a main.py file. :)
Still using port 9000.

Thanks for all the hard work you have been putting in. :) Please continue, within the time you have available, and let me know if I can help at all.

AndrewJ


Devices with 3xDS18B20 and BME280.PNG
Cool!!! :D

The DS's should be able to run on one pin, but maybe the plugin can't handle that yet. I haven't tested that out so far.
I'm busy documenting the architecture and database contents, so that you'll understand how uPyEasy operates.

AndrewJ
Normal user
Posts: 223
Joined: 14 Feb 2017, 12:38

Re: ESP32 boards

#103 Post by AndrewJ » 09 Jan 2018, 19:18

The DS's should be able to run on one pin, but maybe the plugin can't handle that yet. I haven't tested that out so far.
I tried this first time around, with just two DS's, but they interfered with each other and both ended up looking at the same ROM address and reporting the same value as each other. It would be good to do that eventually, to match the ESP8266 version (it would simplify wiring, and use less pins too ;) ) but it is probably best to spend time on developing the rest of uPyEasy, unless someone particularly needs that extra functionality.
I'll raise an Issue on Github for this so it doesn't get lost.
I'm busy documenting the architecture and database contents, so that you'll understand how uPyEasy operates.
That sounds good. :)

LisaM
Normal user
Posts: 491
Joined: 11 Apr 2017, 18:29

Re: ESP32 boards

#104 Post by LisaM » 13 Jan 2018, 13:20

Version v54 has been created op put in the releases dir of the uPyEasy github: https://github.com/letscontrolit/uPyEas ... /tag/ALPHA
The following functionality has been added:
  • Config page
Added admin password (password protected uPyEasy!)
  • Tools page
Added Load Settings (restoring your config)
Added Save Settings (saving your config)
Added Files (Files Explorer, see all dirs/files in the ESP32 flash area, where you can edit/delete/add them)

This is the LAST alpha, the coming week(s) i'm busy documenting uPyEasy (including Togaf 9.1 based Architecture Guidelines, since i'm certified and working as a Data Architect) and transferring the source code to the Github repository. The first new version will then be BETA-1.

BertB
Normal user
Posts: 942
Joined: 25 Apr 2015, 14:39

Re: ESP32 boards

#105 Post by BertB » 13 Jan 2018, 15:57

This is getting better each time I look.

LisaM
Normal user
Posts: 491
Joined: 11 Apr 2017, 18:29

Re: ESP32 boards

#106 Post by LisaM » 13 Jan 2018, 17:01

BertB wrote:
13 Jan 2018, 15:57
This is getting better each time I look.
Thx! :D

AndrewJ
Normal user
Posts: 223
Joined: 14 Feb 2017, 12:38

Re: ESP32 boards

#107 Post by AndrewJ » 13 Jan 2018, 19:02

Thanks for all your hard work on this! :D

BertB
Normal user
Posts: 942
Joined: 25 Apr 2015, 14:39

Re: ESP32 boards

#108 Post by BertB » 13 Jan 2018, 21:42

Knipsel.PNG
Knipsel.PNG (16.5 KiB) Viewed 894 times
Knipsel2.PNG
Knipsel2.PNG (28.92 KiB) Viewed 893 times

AndrewJ
Normal user
Posts: 223
Joined: 14 Feb 2017, 12:38

Re: ESP32 boards

#109 Post by AndrewJ » 13 Jan 2018, 21:50

I like it!
:)

AndrewJ
Normal user
Posts: 223
Joined: 14 Feb 2017, 12:38

Re: ESP32 boards

#110 Post by AndrewJ » 15 Jan 2018, 21:58

LisaM wrote:
13 Jan 2018, 13:20
Version v54 has been created op put in the releases dir of the uPyEasy github: https://github.com/letscontrolit/uPyEas ... /tag/ALPHA
The following functionality has been added:
  • Config page
Added admin password (password protected uPyEasy!)
  • Tools page
Added Load Settings (restoring your config)
Added Save Settings (saving your config)
Added Files (Files Explorer, see all dirs/files in the ESP32 flash area, where you can edit/delete/add them)

This is the LAST alpha, the coming week(s) i'm busy documenting uPyEasy (including Togaf 9.1 based Architecture Guidelines, since i'm certified and working as a Data Architect) and transferring the source code to the Github repository. The first new version will then be BETA-1.
Hi Lisa,
Many thanks for that. It's working on my LOLIN32 LITE board with no immediate problems. :)
(I'm still finding that I need to change to port to 9000 to avoid the 128 error, but I've got it off to a fine art now!) ;)
I'll give it a try on my recently-arrived LOLIN32 Pro soon.

Regarding the DOIT devkit v1 - revision 0 chip, I've more or less given up on it. It just seems very unreliable, I think there may be issues with the power supply end but even attempts to use it with an external supply failed.

Looking forward to the BETA-1 when it's ready!
Andrew

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest