No ESP AP, no terminal output..

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
neykov_t
Normal user
Posts: 15
Joined: 21 Jan 2017, 22:10

No ESP AP, no terminal output..

#1 Post by neykov_t » 21 Jan 2017, 22:16

Hi, i did step by step everything from totorial.
Flashing was succesfull. I am using R120 , but when start i dont see ESP_0 as AP. Try to use terminal( putty) on same port at 115000 but don't see nothing.
Can some one help me ?

btw. i am flashing sonoff RF device.

neykov_t
Normal user
Posts: 15
Joined: 21 Jan 2017, 22:10

Re: No ESP AP, no terminal output..

#2 Post by neykov_t » 23 Jan 2017, 20:55

is it possibly to flash wrong image on my device ? Maybe i have to use 1mb image? Can i brick my device if i try blind shot?

data
Normal user
Posts: 93
Joined: 10 Dec 2016, 11:26

Re: No ESP AP, no terminal output..

#3 Post by data » 23 Jan 2017, 21:36

Yes, use the 1MB image.

Shardan
Normal user
Posts: 1156
Joined: 03 Sep 2016, 23:27
Location: Bielefeld / Germany

Re: No ESP AP, no terminal output..

#4 Post by Shardan » 24 Jan 2017, 19:31

Hello,

afaik the sonof's use 1 MB Flash circuits.
If you flash another size the chip usually won't boot at all or crash immediately.
Regards
Shardan

neykov_t
Normal user
Posts: 15
Joined: 21 Jan 2017, 22:10

Re: No ESP AP, no terminal output..

#5 Post by neykov_t » 25 Jan 2017, 18:22

Thank's. It's work perfect now :)

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 21 guests