Portable syslog server for test/bug check

[grovkillen]

I use this setup for getting the logging done in a easy way (normally I use serial debugging but once a unit is online and placed somewhere it's not easy to get to it physically).

Just download the portable application and unzip it somewhere on your Windows machine: https://github.com/peacepenguin/tftpd64/releases I use the tftpd64 portable edition (4.60).

On the ESP Easy you go to advanced, enter the IP of your machine where you run the tftpd64 application. Change syslog level to 4 and then you just go to the correct tab (Syslog server) and wait for incoming messages.

Remember to remove the settings (IP="blank" and loglevel=0) once you're done.

[Shardan]

+1

[budman1758]

+1

Now we need a "enable" checkbox for the syslog function.

[grovkillen]

Let's make an issue budman!

[budman1758]

Done!

[grovkillen]

Done!

Thanks

[micropet]

Wau!! Thank you.

[grovkillen]

New hosted site found here: https://github.com/peacepenguin/tftpd64/releases