I am running ESP_Easy_mega-20180316_normal_ESP8285_1024.bin on a Sonoff S20 US v1.3. I have 2 switches configured on gpio0, the button, and gpio12, the relay.
If I use Tools->Command and issue gpio,0,1 and look at Devices I see the value is still 0. If I look at Tools->Pin state buffer the value/state is 1.
If I use Tools->Command and issue gpio,12,1 and look at Devices I see the value is 1. If I look at Tools->Pin state buffer the value/state is 1.
I have no rules configured. Any insights would be appreciated.
switch value vs pin state
Moderators: grovkillen, Stuntteam, TD-er
Who is online
Users browsing this forum: No registered users and 23 guests