Hi everybody,
I'm trying to use TaskValueSet to memorize the time when something is switched.
Therefore I wrote in Rules:
TaskValueSet,12,1,%unixtime%
this produces sometimes no change of the DummyVariable found at Task 12 and sometimes it is something in the range of the actual unixtime + x.
x is in the Range of some 20-30 seconds to some Minutes.
I have no clue of what is going on there.
Regards
Tom
TaskValueSet with %unixtime%
Moderators: grovkillen, Stuntteam, TD-er
Re: TaskValueSet with %unixtime%
My guess is that this also has something to do with commands running from the scheduler.
That is something I have to revert, but the last two times I tried, it resulted in crashes.
It is on my PRIO list: https://github.com/letscontrolit/ESPEasy/projects/12
That is something I have to revert, but the last two times I tried, it resulted in crashes.
It is on my PRIO list: https://github.com/letscontrolit/ESPEasy/projects/12
Re: TaskValueSet with %unixtime%
Thanks for info!
Who is online
Users browsing this forum: No registered users and 27 guests