Did you have success with this board? I am keen to order a couple for my halogen downlighters.DeNB3rt wrote:okay thanks! my MPDMV4 arrived today
AC Dimmer for ESPeasy
Moderators: grovkillen, Stuntteam, TD-er
-
- New user
- Posts: 2
- Joined: 09 Jan 2017, 15:34
Re: AC Dimmer for ESPeasy
Re: AC Dimmer for ESPeasy
Hi David,davidlightsa wrote:Did you have success with this board? I am keen to order a couple for my halogen downlighters.DeNB3rt wrote:okay thanks! my MPDMV4 arrived today
You can find more MPDMv4 related informations on this dedicated thread:
viewtopic.php?f=2&t=2362
Happy breadboarding,
TJ.
www.esp8266-projects.com - ESP8266 Projects and many more!
MPDMv4 Universal AC Dimmer is available also on TINDIE Store: https://www.tindie.com/stores/nEXT_EVO1/
MPDMv4 Universal AC Dimmer is available also on TINDIE Store: https://www.tindie.com/stores/nEXT_EVO1/
Re: AC Dimmer for ESPeasy
yes, very happy with it.davidlightsa wrote:Did you have success with this board? I am keen to order a couple for my halogen downlighters.DeNB3rt wrote:okay thanks! my MPDMV4 arrived today
Check the thread in projects.
Located in Belgium, Bruges. Working on a full DIY domoticz setup with ESPEasy.
Re: AC Dimmer for ESPeasy
mgennip,
Can this code code be used for 2 channel AC dimmer.If so what do I have to add to your original code?
Can this code code be used for 2 channel AC dimmer.If so what do I have to add to your original code?
Re: AC Dimmer for ESPeasy
Did you make a plugin for ArduinoEasy?mgennip wrote: ↑17 Nov 2016, 13:03 I have made an ESP8266 AC dimmer with an Atmega328 for phase control. Next week I will post the schematic and code on my website http://www.van-gennip.com
An ESP8266 runs on ESPEasy firmware and i have made a plugin that talks I2C to the Atmega328. It is similar to the pro mini extender, but my Atmega does the zero crossing detection and phase shifting.
It is in an earlyworking stage, but when i share my thoughts, i am sure that this will be picked up by others.
Re: AC Dimmer for ESPeasy
I’m currently in testing my own ac dimmer, and trying to fit it all in a european in wall box.
Curently i’m using a esp-12 for rhe communication, for controlling the light i use a attiny85.
I wrote my own plugin as far as i can see it is working fine, try to adjust a few more things and then going to develope a new pcb, the last one had some mistakes in it.
Curently i’m using a esp-12 for rhe communication, for controlling the light i use a attiny85.
I wrote my own plugin as far as i can see it is working fine, try to adjust a few more things and then going to develope a new pcb, the last one had some mistakes in it.
Re: AC Dimmer for ESPeasy
Great! Will you be sharing more tech details and/or schematic?arnoldg wrote: ↑31 Dec 2017, 16:03 I’m currently in testing my own ac dimmer, and trying to fit it all in a european in wall box.
Curently i’m using a esp-12 for rhe communication, for controlling the light i use a attiny85.
I wrote my own plugin as far as i can see it is working fine, try to adjust a few more things and then going to develope a new pcb, the last one had some mistakes in it.
My TINDIE Store where you can find all ESP8266 boards I manufacture --> https://www.tindie.com/stores/GiovanniCas/
My Wiki Project page with self-made PCB/devices --> https://www.letscontrolit.com/wiki/inde ... :Papperone
My Wiki Project page with self-made PCB/devices --> https://www.letscontrolit.com/wiki/inde ... :Papperone
Re: AC Dimmer for ESPeasy
look at the dutch page https://www.circuitsonline.net/forum/view/139309/1
but this was version 1, after getting the print i discoverd some problems, the E-12 needs more connections then i thought.
I let go i2c and now communicating with serial. becaus i need the int0 pin on the tiny for zcd.
now i'm in the process of remoddeling the stuf to get a new, better working dimmer board.
but first i wan't it all to control it over mqtt, here i'm a little stuck still in the processes of fiddeling out code and that kind of stuff
but this was version 1, after getting the print i discoverd some problems, the E-12 needs more connections then i thought.
I let go i2c and now communicating with serial. becaus i need the int0 pin on the tiny for zcd.
now i'm in the process of remoddeling the stuf to get a new, better working dimmer board.
but first i wan't it all to control it over mqtt, here i'm a little stuck still in the processes of fiddeling out code and that kind of stuff
Re: AC Dimmer for ESPeasy
Just uploaded a video with regards to the development of Meek MD1 ( Meek Wi-Fi enabled Dimmer)
https://www.youtube.com/watch?v=Y9hVDwKcEDw
https://www.youtube.com/watch?v=Y9hVDwKcEDw
Re: AC Dimmer for ESPeasy
Do you have code sample for pro mini ?
Re: AC Dimmer for ESPeasy
Yes, I do, but it’s very “dirty” and still "work in progress".
Once I have implemented all the options, I will clean the code and put some explanations in the code for the ease of use/distribution.
Re: AC Dimmer for ESPeasy
I have placed the dirty code of the Meek MD1 dimmer, on the following topic :
viewtopic.php?f=2&t=3721
viewtopic.php?f=2&t=3721
Re: AC Dimmer for ESPeasy
I’ve just received the PCB’s for the Meek MD (Wifi Dimmer).
Unfortunately, the ATmega328 has not been delivered yet.
Once I have them in my possession, I will assemble and post some info.
In the meantime I will work on the dimmer codebase.
Attached you’ll find a picture of the dimmer PCB’s.
Unfortunately, the ATmega328 has not been delivered yet.
Once I have them in my possession, I will assemble and post some info.
In the meantime I will work on the dimmer codebase.
Attached you’ll find a picture of the dimmer PCB’s.
Who is online
Users browsing this forum: No registered users and 31 guests