Sensirion SHT30 supported?

[Tbomek]

Yes, I changed jupers on the shield and chose different addresses in the tasks.

{"System":{
"Build": 20100,
"Unit": 1,
"Local time": 2018-03-05 14:34:45,
"Uptime": 1,
"Free RAM": 18056
},
"Sensors":[
{
"TaskName": "SHT30_0x44",
"house T": 6.52,
"house H": 49.81
},
{
"TaskName": "SHT30_0x45",
"OutDor T": 6.48,
"OutDor H": 49.78
}
]}

0x45 is outside
0x44 it's inside my house where it's 21 degrees
0x44 it shows the same as 0x45

see my photos https://photos.app.goo.gl/mMjx1g0ZylR24dzX2

Regards

[beic]

see my photos https://photos.app.goo.gl/mMjx1g0ZylR24dzX2

Gonna see what is happening there...

[Tbomek]

Hello, do you have time to see it?

see my photos https://photos.app.goo.gl/mMjx1g0ZylR24dzX2

Gonna see what is happening there...

[beic]

Hello, do you have time to see it?

PR was made on the GitHub, but not Merged yet, see https://github.com/letscontrolit/ESPEasy/pull/1081, majority of duplex Plugins have a same issue!

Regards

p.s. Please leave you post test feedback about current changes

[Tbomek]

Thank you, it's much better. Now it reads two sensors separately. I check on "ESP_Easy_masy-20180314_dev_ESP8266_4096" a few days and I will give a report.
Regards

[beic]

Thank you, it's much better. Now it reads two sensors separately. I check on "ESP_Easy_masy-20180314_dev_ESP8266_4096" a few days and I will give a report.
Regards

Appreciated

[beic]

I check on "ESP_Easy_masy-20180314_dev_ESP8266_4096" a few days and I will give a report.

There is a new firmware released with merged plugin!

Regards

[Tbomek]

Great. I am glad that this problem has been solved.

[beic]

Great. I am glad that this problem has been solved.

Yeah, so, did you made any test? All working as expected now?!

[Tbomek]

Yes, I tested on two wemos 1d mini. The first one is working in a recuperator in my home. After uploading the patch. Good temperature, bad reading humidity (jumps ~ 40% to ~ 95%). I exchanged wemos 1d for a second and then everything returned to normal.
Curiosity. I thought I had a damaged first wemos d1 min. I rewrote the patch and connected the STH30. Everything was back to normal. I assumed that it coincided with a circumstance, maybe some cables came in contact? Does not matter. It is important that it is already working.

Ps. I am sorry for my language. I hope you understood me.

[beic]

Yes, I tested on two wemos 1d mini. The first one is working in a recuperator in my home. After uploading the patch. Good temperature, bad reading humidity (jumps ~ 40% to ~ 95%). I exchanged wemos 1d for a second and then everything returned to normal.
Curiosity. I thought I had a damaged first wemos d1 min. I rewrote the patch and connected the STH30. Everything was back to normal. I assumed that it coincided with a circumstance, maybe some cables came in contact? Does not matter. It is important that it is already working.

Ps. I am sorry for my language. I hope you understood me.

Glad that you solved all out! And your language are just fine!