Dear All,
I'm new to this forum,
I have used the ESPEasy software already in a few domoticz project but that was pretty much straight forward and I like the ESP-Easy very much.
I have bought a MOD-1016 lightning sensor with a AS3935 chip http://www.embeddedadventures.com/datas ... doc_v4.pdf and I would like to read from that sensor and with ESP-Easy send the information to my domoticz system. As far as I could find out the AS3935 isn't supported at this moment by ESP-Easy. I can find arduino sketches for this chip on the internet but I do not understand how to get this implemented in ESP-Easy.
Can some of you help / guide me what to do so I can implement this sensor in ESP-Easy?
Any help is very much appreciated and I hope for some answers.
Best regards
Bert
Support - AS3935 Lightning detector
Moderators: grovkillen, Stuntteam, TD-er
Re: Support - AS3935 Lightning detector
Good Day bertbigb
Did you find anything on this?
Thank You
Albertus Geyser
Did you find anything on this?
Thank You
Albertus Geyser
Re: Support - AS3935 Lightning detector
Hi Albertus,
Until now I was not receiving any answers to my questions.
I was trying myself but until now I was not successful of hooking up the sensor to the ESP-32.
So hopefully someone else can and will help us.
Kind regards
Bert
Until now I was not receiving any answers to my questions.
I was trying myself but until now I was not successful of hooking up the sensor to the ESP-32.
So hopefully someone else can and will help us.
Kind regards
Bert
Who is online
Users browsing this forum: Google [Bot] and 128 guests