Weird issue: can't use more than 3 switches - WeMos D1 MiniPro

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
amigaroxx
New user
Posts: 4
Joined: 11 Jun 2018, 22:00

Weird issue: can't use more than 3 switches - WeMos D1 MiniPro

#1 Post by amigaroxx » 11 Jun 2018, 22:14

Hi Guys,

This issue drove me bonkers this weekend. I really hope you can help.

It sounds so simple: I have 3 doors, so I have 3 (identical) door switches. All of them work. I added and configured the first 2 switches as devices with ease (GPIO 00 & GPIO 02). No problems there.

When I try to add the third switch as device, I won't work. I can add the device (same configuration as the first 2), but it does NOT register any switching (1 or 0). I picked GPIO 16, just to be sure the pin did not have multiple functions (since I'm a noob). No luck. So, the trial & error began: I tried all the other GPIO pins, without any luck. What do I miss?

No, the switch is definitely not broken. I switched it around with the others, and that worked. Except that the 3rd device wouldn't not register any switching.

I'm running R120, since I flashed it flash.cmd found on this website.

Thanks in advance!

papperone
Normal user
Posts: 497
Joined: 04 Oct 2016, 23:16

Re: Weird issue: can't use more than 3 switches - WeMos D1 MiniPro

#2 Post by papperone » 12 Jun 2018, 06:53

I've even 8 switches on the same device perfectly working so that's defintely possible...
Try to switch to the latest build or at least to R148.
My TINDIE Store where you can find all ESP8266 boards I manufacture --> https://www.tindie.com/stores/GiovanniCas/
My Wiki Project page with self-made PCB/devices --> https://www.letscontrolit.com/wiki/inde ... :Papperone

amigaroxx
New user
Posts: 4
Joined: 11 Jun 2018, 22:00

Re: Weird issue: can't use more than 3 switches - WeMos D1 MiniPro

#3 Post by amigaroxx » 12 Jun 2018, 22:10

papperone wrote: 12 Jun 2018, 06:53 I've even 8 switches on the same device perfectly working so that's defintely possible...
Try to switch to the latest build or at least to R148.
Where can I find R148? I can only find R147 RC8 on the website..... sooo... :oops:

papperone
Normal user
Posts: 497
Joined: 04 Oct 2016, 23:16

Re: Weird issue: can't use more than 3 switches - WeMos D1 MiniPro

#4 Post by papperone » 13 Jun 2018, 06:53

amigaroxx wrote: 12 Jun 2018, 22:10
papperone wrote: 12 Jun 2018, 06:53 I've even 8 switches on the same device perfectly working so that's defintely possible...
Try to switch to the latest build or at least to R148.
Where can I find R148? I can only find R147 RC8 on the website..... sooo... :oops:
go for R147 but you can try as well latest 2.0 build...
My TINDIE Store where you can find all ESP8266 boards I manufacture --> https://www.tindie.com/stores/GiovanniCas/
My Wiki Project page with self-made PCB/devices --> https://www.letscontrolit.com/wiki/inde ... :Papperone

Post Reply

Who is online

Users browsing this forum: No registered users and 31 guests