Page 1 of 1

neopixel only accepting one command

Posted: 13 Jun 2018, 18:11
by riker1
Hi

I did send commands like-
It used to work.

http://192.168.0.167/control?cmd=NeoPixelAll,0,0,0

Now all of a sudden, only one command isexecuted.

no other.

running v2.0-20180113

having neopixel with 60 led.

A reboot does not solve it.

in the log no hint.

when I reconnect neopixel - power off, power on, then only once a command is executed.

Any hints ?

Thanks T