[solved] BME280 + DHT22 no data showing

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
dafosy
New user
Posts: 3
Joined: 23 Oct 2018, 01:32

[solved] BME280 + DHT22 no data showing

#1 Post by dafosy » 23 Oct 2018, 01:39

Hey Community,

I made my sensors working on a nodemcu and delivered to a volkszähler.org Raspberry device perfectly. Which means, the temperature of the sensors are working.

Unfortunately the data of "humid" of the DHT22 sensor and the "humid" and "pressure" data of the BME280 are not delivered to my controller.
BUT: the data is shown on the ESP_Easy device section perfectly.

Almost all settings are the same as the temperatur instead of the UUID of each messurement.

Do you have an idea whats wrong?
(GIT version: mega-20181020)

Regards
dafosy
Last edited by dafosy on 24 Oct 2018, 02:37, edited 1 time in total.
Top
User avatar
grovkillen
Core team member
Posts: 3621
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden
Contact:
Contact grovkillen

Re: BME280 + DHT22 no data showing

#2 Post by grovkillen » 23 Oct 2018, 06:09

Have you tried the latest release? We have done some fixes to those issues you're describing.
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:
Top
dafosy
New user
Posts: 3
Joined: 23 Oct 2018, 01:32

Re: BME280 + DHT22 no data showing

#3 Post by dafosy » 23 Oct 2018, 08:19

Hello again and Thx for the quick answer.

The release is dated 20.10.2018, but I will try the newest one or is there a stable, working release in the past?

/dafosy
Top
User avatar
grovkillen
Core team member
Posts: 3621
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden
Contact:
Contact grovkillen

Re: BME280 + DHT22 no data showing

#4 Post by grovkillen » 23 Oct 2018, 10:28

We're rolling in a fairly straight line into getting A STABLE release. We haven't really had one before. So latest nightly is the best there is I'd say.
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:
Top
dafosy
New user
Posts: 3
Joined: 23 Oct 2018, 01:32

Re: BME280 + DHT22 no data showing

#5 Post by dafosy » 24 Oct 2018, 02:36

The update did the trick!
Thanks!
Top
Post Reply

Return to “ESP Easy: Software”

Who is online

Users browsing this forum: Bing [Bot] and 55 guests