(solved) use enable RX TX GPios for esp01S 8266

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
riker1
Normal user
Posts: 344
Joined: 26 Dec 2017, 18:02

(solved) use enable RX TX GPios for esp01S 8266

#1 Post by riker1 » 29 Jan 2019, 11:38

Hi
how can i select GPIO 1 and 3 (RX TX) for a switch.
Need this for ESP01 controlling relais.

Do not need serial but need 4 Gpios...

Thanks Thomas

Using latest firmware a the moment

Can this be enabled in Hardware section?
Last edited by riker1 on 30 Jan 2019, 18:54, edited 1 time in total.
Top
Wiki
Normal user
Posts: 413
Joined: 23 Apr 2018, 17:55
Location: Germany

Re: use enable RX TX GPios for esp01S 8266

#2 Post by Wiki » 30 Jan 2019, 11:43

Just go to Tools/Advanced and disable the serial port, so you will have the GPIO1 and GPIO3 available for your own application.

Code: Select all

pi@raspberrypi:~ $ man woman
No manual entry for woman
pi@raspberrypi:~ $
Top
riker1
Normal user
Posts: 344
Joined: 26 Dec 2017, 18:02

Re: use enable RX TX GPios for esp01S 8266

#3 Post by riker1 » 30 Jan 2019, 11:49

Ah
perfect. will check this

that would be great

Thanks
Top
riker1
Normal user
Posts: 344
Joined: 26 Dec 2017, 18:02

Re: use enable RX TX GPios for esp01S 8266

#4 Post by riker1 » 30 Jan 2019, 18:54

that solved it. nice coonfiguration. perfect
thanks
Top
Post Reply

Return to “ESP Easy: Software”

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot] and 16 guests