using a sonoff module,
I put in rules as shown below.
when running " http://sonoff-12/control?cmd=event,TimerOn" in my browser
the LED is lit for 10 seconds, everything ok.
but when putting " http://sonoff-12/control?cmd=event,remoteTimerControl=5" in my browser
the LED blink shortly, sometimes very short, sometimes half a second.
It looks to me that the eventvalue is not forwarded ?
Pls help !
Regards, Bart
Code: Select all
// LED off/on
on LedOff do
gpio,13,1
endon
on LedOn do
gpio,13,0
endon
on remoteTimerControl do
event LedOn
timerSet,1,%eventvalue%
endon
on rules#timer=1 do
event LedOff
endon
on TimerOn do
event LedOn
timerset,2,10
endon
on rules#timer=2 do
event LedOff
endon