hello folks,
my rflink is a 433.42 and work fine with rflinkloader on my desktop on windows. my remotes are paired with my somfy blinks , everything works fine.
When i plug it on my pi with usb cable, the pi see it on tty/acm1.
domoticz see this port, but when i try to open a store, nothing happen.
I try to send command with a python script, but i do not have answer from rflink.
my script:
import serial
rfl=serial.Serial('/dev/ttyACM1',57600,timeout=.1)
rfl.write('10;RTSSHOW;'\r\n'.encode())
while True:
rfl.readline()
this is what i ve got:
b'20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R48;\r\n'
don't understand why i do not have the list of my remotes?
any help?
issues on raspberry pi
Moderators: rtenklooster, Voyager, BertB, Stuntteam
Re: issues on raspberry pi
Well, actually it was a wire problem. I used a proto Shield but it was for a Uno card, not for méga, so i plugged it on the wrong place. All ok now
-
- New user
- Posts: 4
- Joined: 29 Feb 2020, 11:50
Re: issues on raspberry pi
It seemed odd to me too that it wouldn't work, never had this sort of negative experience with it before.
Who is online
Users browsing this forum: No registered users and 1 guest