RFLink release 42 is available for download

[Stuntteam]

R42:
- New Device: Mi-Light/LimitlessLED/Applamp bridge functionality (2.4 Ghz, NRF24L01 with Milight wiring required)
- New Device: Hama SD-UN5-RF switch set
- New Device: Acurite Tower sensors
- New Device: Pollin PFR-130 Temperature & Rain meter
- New Device: Gaposa Blind/Shutter control (a.o. model QCT3S)
- New Device: Byron BY35 / BY301
- Added: Command "echo" function to auto create devices without the need of remote controls
- Added: Command "rtsrecclean 9" function to clean a single rolling code table entry
- Added: Command to invert the ON/OFF handling of the Tristate protocol
- Fixed: improved Atlantic MD-210R detection
- Fixed: improved DKW2012 detection to cover variations of the signal
- Fixed: Smarthome YC-4000B detection
- Fixed: improved RTS packet detection to prevent false positives
- Fixed: improved FA500 packet detection to prevent false positives
- Fixed: Modified X10 security sensor packet detection
- Fixed: Modified maximum humidity limit
- Fixed: Improved signal ARC detection
- Fixed: Chacon EMW200 detection
- Fixed: Nexa WST-512 detection
- Fixed: Oregon UV800
- Fixed: CM113 ID
- Added: Support for another MiLight remote variant

the download is available via our blog.
http://www.nemcon.nl/blog2

[negan]

Great thanks !

- Added: Command to invert the ON/OFF handling of the Tristate protocol

How do you use this command ?
Thank you.

[Mediacj]

Great thanks !

- Added: Command to invert the ON/OFF handling of the Tristate protocol

How do you use this command ?
Thank you.

I would like to know that to

Although I suppose this is not available for the Livolo switches where on=off and off=on(for me at least)

thx

[rkoppen]

Mi-Light/LimitlessLED/Applamp bridge functionality (2.4 Ghz, NRF24L01 with Milight wiring required)

Can someone elaborate on this, does this mean that you do not need a bridge ? And is a NRF24L01 needed ? Where can I find more info ?

[Stuntteam]

Correct, if you have RFLink with a NRF24L01 wired for Milight you do not need any other bridge.
you can find all details on www.nemcon.nl/blog2
the wiring page shows how to connect the NRF24L01
the Frequently Asked Questions page shows various other aspects about Milight

[rkoppen]

That sounds cool, I will be looking into this.

Edit: Never mind found it in the FAQ.

Now to order a milight

[negan]

Great thanks !

- Added: Command to invert the ON/OFF handling of the Tristate protocol

How do you use this command ?
Thank you.

Any help ?
Thank you

[lukcinek22]

Hi
Is there a possibility to use RF Link Loader with Arduino NANO instead Arduino Mega?
Best regards

[Stuntteam]

No, sorry. RFlink wont fit on a Nano.
Btw, an Arduino Mega can be bought for as low as 6 euros..

[grz3]

is there available any smaller version of arduino mega (like nano) which will RFLINK fit into?

[Stuntteam]

Maybe the Mega Pro mini, we did not test it though.
But why would you use a smaller version?

[lukcinek22]

Thx for answer Stuntteam
I think I need to buy one...
Best regards

[rkoppen]

I think the questions is aimed to get a smaller form factor. do you have any plans/ideas ?

[negan]

Why is my question avoided ?

[Stuntteam]

oops, not on purpose..
I think you were looking for the following commands:
10;TRISTATEINVERT=ON;
10;TRISTATEINVERT=OFF;
Not fully tested yet.
Note that when you turn invert on, ON becomes OFF and vice versa for ALL tristate devices.

[TwoEasy]

Hi guys! I encountered a problem when trying to ad milight!

It finds the milight remote very fast. But when I click to turn milight on or off it just says
"Error sending switch command, check device/hardware !" in domoticz. How do I solve this?

[Voyager]

You probably need a more recent Domoticz version

[TwoEasy]

You probably need a more recent Domoticz version

I am on

Version: 3.4834
Build Hash: 8398125
Compile Date: 2016-03-02 08:43:51

How do I get a more updated version?

Edit: Should I go for the beta?

3.5301 2016-07-14

(I am using a Raspberry pi 2 for domoticz)

[Stuntteam]

Yes, you will need beta..

[TwoEasy]

Yes, you will need beta..

Thanks, Im really liking rflink so far!

edit: Was super quick to switch to beta, and milight instantly worked! Thank you!

[the cosmic gate]

anny news/ update for the next release incl mysensors ?

[iMartyn]

Please can we get the source uploaded?

Even better, can you put it on github and not do random google drive releases?

The nrf2401 library that I think you're using has some bugs and I'd like to use the patched/fixed version. The Milight is unreliable with some nrf2401l transmitters because of this (I think) but I can't fix it because you're only sometimes releasing source.

[Stuntteam]

It should use this: http://tmrh20.github.io/RF24/

[the cosmic gate]

is there some update about the RFLink with MySensors intergration ?

[Ger]

Any news about R43 and or sourcode on github?

[Stuntteam]

Target is this week..
update 16/9: slightly delayed.. nearly done..