Wall panel remote transmitter

[starnight]

Hello.

I have buy this product :https://www.aliexpress.com/item/Smart-H ... 0.0.urO04y

The transmitter is based on a EV1527 IC ship.
It was not automaticly recognised. I have try the RF signal learning.
I find the code (only with debug mode) but it change regulary :

Code: Select all

20;0D;RFFind;x;700DD8;6;18;1;
20;CB;RFFind;x;700DD8;6;18;1;
20;CD;RFFind;x;700DD8;7;18;1;

I have recorded this code :

Code: Select all

RF Record: 0 ID: 700DD8 S: 06 L: 18 T: 01 - ON

It is a push button. So I have only enter the ON command.

For the debug log, I have this (with 2 pulses) :

Code: Select all

20;05;DEBUG;Pulses=50;Pulses(uSec)=60,30,810,30,810,30,810,60,300,540,510,330,270,540,270,570,270,570,240,570,240,570,240,570,750,60,750,90,240,600,750,90,750,90,750,120,210,600,750,90,750,120,210,630,210,630,210,630,210,6990;
20;06;DEBUG;Pulses=50;Pulses(uSec)=240,600,660,120,660,120,660,120,180,600,180,660,180,660,180,660,180,660,180,660,180,660,180,660,690,150,690,150,180,660,690,150,690,150,690,150,180,660,690,150,690,150,180,660,180,660,180,660,180,6990;
20;07;DEBUG;Pulses=50;Pulses(uSec)=360,540,780,60,780,60,780,90,240,570,240,570,240,570,240,570,420,420,240,600,240,600,240,600,750,90,750,90,210,600,750,90,750,120,750,120,210,630,720,120,720,120,210,630,210,630,210,630,210,6990;
20;08;DEBUG;Pulses=24;Pulses(uSec)=300,180,240,150,30,930,30,360,30,390,0,1710,270,180,240,210,150,180,240,180,210,2070,150,180;

If I push it with no debug, it happen nothing...

Thanks a lot

[starnight]

Any news for this product ? Do you want more information ?

[starnight]

Have you find a solution ?