Let's Control It

Hi all,
i have an pool thermometer from freetec which is actual not supported. It is an additional thermometer for the PT-250 Base. Model Number of the thermometer is NX-9193-675. Debug Data as followed, would be great if you can implemet it.

2017-06-08 08:40:54 - 20;28;DEBUG;Pulses=76;Pulses(uSec)=510,3810,390,1860,420,1860,420,3900,390,1860,390,3780,390,3780,390,3870,390,3810,390,3780,390,1830,390,3870,390,1860,390,1860,390,3780,390,1920,390,1860,390,1860,390,1860,390,1920,390,3810,390,3780,390,3780,390,1920,390,1860,390,1860,390,3780,390,1920,390,1890,390,1860,390,1860,390,1950,390,1860,390,1890,390,1890,390,1890,360,990,480,6990;
20;29;DEBUG;Pulses=46;Pulses(uSec)=300,1830,360,1770,360,1740,360,1830,390,1920,390,3810,390,3750,420,3840,390,1920,390,1860,390,1830,390,3780,390,1920,390,1860,390,1830,390,1860,360,1950,390,1860,390,1860,390,1830,390,1920,420,930,510,6990;


Best Regards from Peter!

Hello!

Would also really appreciate if this device could be added.
Decoding shouldn't be hard and if I would know how to do I would try to write a plug-in .. but unfortunately I don't know.
Attached what I found on how to decode!

Thanks!

KR,

James