"Use Save button" in input device ?

Moderators: Voyager, BertB, rtenklooster, Stuntteam, grovkillen, TD-er

Post Reply
Message
Author
Patou
Normal user
Posts: 19
Joined: 21 May 2018, 10:33

"Use Save button" in input device ?

#1 Post by Patou » 11 Mar 2019, 13:17

Hello,
Can somebody explain what is the action of clicking the "Use Save Button" in the switch device.
I discover with 3 Sonoff 4 CH Pro a strange behaviour :
- All have the same firmware : ESP_Easy_mega-20181220_normal_ESP8285_1024.bin
- All have the same rules
- All have the same devices
Fisrt is working OK
Second reset the outputs 1 to 4 after 4 to 10 seconds to low
Third reset only the ouputs 1 to 2 after same time

I tried to erase all the firmware by loading a blank 1 Mb file no results
Finally I clicked the "Use Save button" and the problem is solved except that the reaction on the input is slower

Patou

ThomasB
Normal user
Posts: 182
Joined: 17 Jun 2018, 20:41
Location: USA

Re: "Use Save button" in input device ?

#2 Post by ThomasB » 11 Mar 2019, 16:55

The Switch Device "Use Safe Button (slower)" feature changes the switch's input sampling from 100mS to 200mS. It is a simple contact debounce.

- Thomas

Patou
Normal user
Posts: 19
Joined: 21 May 2018, 10:33

Re: "Use Save button" in input device ?

#3 Post by Patou » 11 Mar 2019, 20:01

Thanks for the info

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests