View source for DHT12

= Introduction =
The ESP module can read a DHT12 I2C temperature/Humidity sensor using the I2C protocol.

The DHT sensor needs to be connected to the I2C bus.

== Hardware ==
The DHT sensor can be connected directly to an ESP module. [https://github.com/mcauser/MicroPython-ESP8266-DHT-Nokia-5110/blob/master/datasheets/DHT12%20Machine%20Translated%20to%20English.en.pdf Datasheet DHT12]

----
[[File:DHT12.png|320px]]
----

= Software =

== Custom Sketch ==

== ESP Easy ==
Use the device tab on the ESP Easy webinterface and create a new task by editing one of the available tasks. Select "Temperatur/Humidity Sensor DHT12(I2C)" from the dropdown box.

 [[File:EasyConfigDHT12.png]]

Enter the IDX found in the Domoticz device page. That should be all.

=== Optional settings ===

[[ EasyFormula | Use of formulas]]

[[ EasyValueNames | Use of value names]]