Difference between revisions of "MPU6050"
(Created page with "{{WorkInProgress}} = Introduction = The plugin for the MPU 6050 can be used as a motion sensor. Apart from singling the home controller when a certain amount of movement is d...") |
|||
Line 8: | Line 8: | ||
The MPU 6050 is made by InvenSense and contains a accelerometer and gyroscope in one package for all three dimensional axis. Fitted with a build-in 16 bit analog to digital convertor per channel it is capable of capturing all three axis simultaneously. The sense is fitted with multiple I2C interfaces of which one is used for communicating with a master controller. The chip has one I2C address selection pin so two sensors can be attached to the bus simultaneously. The plugin supports using two sensors. | The MPU 6050 is made by InvenSense and contains a accelerometer and gyroscope in one package for all three dimensional axis. Fitted with a build-in 16 bit analog to digital convertor per channel it is capable of capturing all three axis simultaneously. The sense is fitted with multiple I2C interfaces of which one is used for communicating with a master controller. The chip has one I2C address selection pin so two sensors can be attached to the bus simultaneously. The plugin supports using two sensors. | ||
+ | |||
+ | == Connections == | ||
+ | The commonly used breakout board GY-521 has | ||
= Software = | = Software = | ||
== Custom sketch == | == Custom sketch == | ||
== ESP Easy == | == ESP Easy == |
Revision as of 17:37, 22 February 2017
You may hear some construction noise in the background...
Introduction
The plugin for the MPU 6050 can be used as a motion sensor. Apart from singling the home controller when a certain amount of movement is detected, this plugin is also capable of showing the raw values from the dMPU 6050 device.
Hardware
The MPU 6050 is made by InvenSense and contains a accelerometer and gyroscope in one package for all three dimensional axis. Fitted with a build-in 16 bit analog to digital convertor per channel it is capable of capturing all three axis simultaneously. The sense is fitted with multiple I2C interfaces of which one is used for communicating with a master controller. The chip has one I2C address selection pin so two sensors can be attached to the bus simultaneously. The plugin supports using two sensors.
Connections
The commonly used breakout board GY-521 has