You ever get it working? I tried today and the I2C scan came up with a whole bunch or sensor addresses but then defaulted to use 0x23, the default. The value initially reported, bounced around a bit then got stuck on one value never to update again.
Search found 49 matches
- 11 Jul 2019, 12:45
- Forum: ESP Easy: Projects / Applications
- Topic: sonoff s20 i2c question
- Replies: 5
- Views: 7313
Re: sonoff s20 i2c question
- 13 Jun 2017, 00:08
- Forum: ESP Easy: Hardware
- Topic: H801 : RGB controller based on ESP8266 avalaible from China
- Replies: 134
- Views: 192488
Re: H801 : RGB controller based on ESP8266 avalaible from China
Downloaded plugin zip from GitHub and extracted P105 to ESPEasy_v2.0.0-dev10\Source\src. Same error.
- 12 Jun 2017, 23:58
- Forum: ESP Easy: Hardware
- Topic: H801 : RGB controller based on ESP8266 avalaible from China
- Replies: 134
- Views: 192488
Re: H801 : RGB controller based on ESP8266 avalaible from China
I downloaded the RAW data for the plugin and created a file in Notepad++. Will that not work?vojtishek wrote: ↑12 Jun 2017, 13:31 Did you download whole master zip from https://github.com/ESP8266nu/ESPEasyPluginPlayground and extract only _P105_RGBW.ino?
- 12 Jun 2017, 12:13
- Forum: ESP Easy: Hardware
- Topic: H801 : RGB controller based on ESP8266 avalaible from China
- Replies: 134
- Views: 192488
Re: H801 : RGB controller based on ESP8266 avalaible from China
Hmmm. Do I need to be using older builds?
- 12 Jun 2017, 12:09
- Forum: ESP Easy: Hardware
- Topic: H801 : RGB controller based on ESP8266 avalaible from China
- Replies: 134
- Views: 192488
Re: H801 : RGB controller based on ESP8266 avalaible from China
Then you need to copy P105_RGBW.ino into following folder "ESPEasy_R147_RC8\Source\ESPEasy", then compile and flash. Whoops. Get these errors when trying to compile now. Do I need to define the plugin somewhere? Compiling .pioenvs\normal_4096\FrameworkArduino\Updater.o C:/Users/peters/One...
- 12 Jun 2017, 11:59
- Forum: ESP Easy: Hardware
- Topic: H801 : RGB controller based on ESP8266 avalaible from China
- Replies: 134
- Views: 192488
Re: H801 : RGB controller based on ESP8266 avalaible from China
Then you need to copy P105_RGBW.ino into following folder "ESPEasy_R147_RC8\Source\ESPEasy", then compile and flash. @vojtishek. Thank you so much!! Easier than I thought and quite obvious when I think about it. :idea: I'm using Home Assistant so will be controlling the device using MQTT....
- 12 Jun 2017, 03:47
- Forum: ESP Easy: Hardware
- Topic: H801 : RGB controller based on ESP8266 avalaible from China
- Replies: 134
- Views: 192488
Re: H801 : RGB controller based on ESP8266 avalaible from China
Hey there,
Could someone give me a hint on how to add _P105_RGBW.ino for H801 to Platformio so I can compile? New to Platformio so any assistance would be appreciated.
Could someone give me a hint on how to add _P105_RGBW.ino for H801 to Platformio so I can compile? New to Platformio so any assistance would be appreciated.
- 20 Feb 2017, 09:26
- Forum: ESP Easy: Hardware
- Topic: SONOFF TOUCH - Did you see it?
- Replies: 33
- Views: 36902
Re: SONOFF TOUCH - Did you see it?
Thanks! Good to know. I would get some of those if they sold the multi socket version like the one on https://world.taobao.com/item/527467680727.htm#detaildrbrains wrote:I am using ESP Easy on the SonOff S20.
- 20 Feb 2017, 09:18
- Forum: ESP Easy: Software
- Topic: Rules GPIO state and toggle
- Replies: 43
- Views: 77595
Re: Rules GPIO state and toggle
Thank you! I tidied up my code and it works religiously via MQTT so very happy. I appreciate your input.paxi wrote:You can still sum up the two seperate relay#state rules into one (like in my toggle example above).
- 20 Feb 2017, 08:31
- Forum: ESP Easy: Hardware
- Topic: SONOFF TOUCH - Did you see it?
- Replies: 33
- Views: 36902
Re: SONOFF TOUCH - Did you see it?
I got them flashed and working (see my other post) Thanks for that. You flashed them with Espurna though? I just tried over the weekend but had to jump through hoops under Windows with Platformio to get a Wemos flashed (five different Windows programs required). Certainly a long way from being as e...
- 20 Feb 2017, 00:02
- Forum: ESP Easy: Hardware
- Topic: SONOFF TOUCH - Did you see it?
- Replies: 33
- Views: 36902
Re: SONOFF TOUCH - Did you see it?
Can you provide a link to the hardware?drbrains wrote:I found a 2 gang sonoff touch "look-a-like"
- 17 Feb 2017, 11:28
- Forum: ESP Easy: Software
- Topic: Rules GPIO state and toggle
- Replies: 43
- Views: 77595
Re: Rules GPIO state and toggle
"toggle" is a user defined event, no native implementation in the firmware. Thanks for clearing that up. So much for my copy and paste from other threads. It clearly was not needed. To get around my intermittent UDP issue, I went with MQTT instead. This works flawlessly. Ensure that 'send...
- 16 Feb 2017, 11:48
- Forum: ESP Easy: Software
- Topic: Rules GPIO state and toggle
- Replies: 43
- Views: 77595
Re: Rules GPIO state and toggle
Too bad that TaskValueSet doesn't work via mttq... We need another rule in the "master": on relay#state do if [relay#state]=1 GPIO 13,0 else GPIO 13,1 endif SendTo 2,event,toggle endon Btw. how was the toggle event triggered in your original code? I had not tried the TaskValueSet method a...
- 16 Feb 2017, 10:04
- Forum: ESP Easy: Software
- Topic: Rules GPIO state and toggle
- Replies: 43
- Views: 77595
Re: Rules GPIO state and toggle
... Can someone suggest a code tidy up for that below? ... on button#state do if [relay#state] = 0 GPIO,12,1 else GPIO,12,0 endif endon on toggle do if [relay#state] = 1 GPIO,12,0 else GPIO,12,1 endif endon on relay#state do if [relay#state] = 1 gpio,13,0 else gpio,13,1 endif endon on relay#state d...
- 16 Feb 2017, 09:31
- Forum: ESP Easy: Software
- Topic: Rules GPIO state and toggle
- Replies: 43
- Views: 77595
Re: Rules GPIO state and toggle
... Can someone suggest a code tidy up for that below? ... The only problem with this is whenever a sendto command is missed (connection-less UDP!) both units will be out of sync - better replace sendto with sendtohttp. The remote command changes from gpio to TaskValueSet that alters the value of b...
- 16 Feb 2017, 04:36
- Forum: ESP Easy: Software
- Topic: Rules GPIO state and toggle
- Replies: 43
- Views: 77595
Re: Rules GPIO state and toggle
Ok, found it. on Lightswitch#value do if [GPIO12#value] = 0 GPIO,12,1 else GPIO,12,0 endif endon on toggle do if [GPIO12#value] = 1 GPIO,12,0 else GPIO,12,1 endif endon Thank you! This is exactly what I needed. Can someone suggest a code tidy up for that below? I added code to yours to activate the...
- 14 Feb 2017, 03:19
- Forum: ESP Easy: Software
- Topic: Rules GPIO state and toggle
- Replies: 43
- Views: 77595
Re: Rules GPIO state and toggle
I'm using R148 and I have two switches, one on GPIO12 as a sensor for my garage door and another on GPIO14 to drive the relay. The relay needs to turn on for one second then off again to emulate the integrated garage controller. The GPIO12 switch is called 'reed' and is set to 'Push Button Active Lo...
- 11 Feb 2017, 05:27
- Forum: ESP Easy: Hardware
- Topic: SONOFF TOUCH - Did you see it?
- Replies: 33
- Views: 36902
Re: SONOFF TOUCH - Did you see it?
Did a quick video with full how to guide in the description. Enjoy. Works a treat!
https://www.youtube.com/watch?v=s5gbdy0niAs
https://www.youtube.com/watch?v=s5gbdy0niAs
- 18 Nov 2016, 11:55
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2390955
Re: Nextion display plugin
Would you post one of the populated boards to NZ to allow me to test? I can pay with PayPal or Amazon UK gift card. Understand if it's too much hassle.ledfreak3d wrote:Double checked.
I have 4 unpopulated boards and
2 populated with a esp07 on it
- 17 Nov 2016, 10:48
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2390955
Re: Nextion display plugin
thought so ;) if anybody is interested can put in a new order of boards ill check tonight how many I still have still have enough components to make more boards but don't have any esp12e's or buttons at the moment . still thinking about making a custome domoticz sensor board eather with esp8266 or ...
- 17 Nov 2016, 08:25
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2390955
Re: Nextion display plugin
I can solder, no issue there I just don't have the time these days. Is a populated board available?ledfreak3d wrote:Hey Depends if you want bare boards or
boards that have been populated
- 17 Nov 2016, 07:52
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2390955
Re: Nextion display plugin
Awesome. Can you suggest a source? I'd love to try some of these.ledfreak3d wrote:Its a replica of scargils esp board had some made in black very handy for the nextions and any esp project
- 17 Nov 2016, 04:10
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2390955
Re: Nextion display plugin
What ESP board are you using in the photo?ledfreak3d wrote:Plugin seems to work fine
now trying to see what variables work
see picture attached
- 14 Nov 2016, 01:22
- Forum: ESP Easy: Software
- Topic: ESP Easy next stable... (release candidates)
- Replies: 155
- Views: 123419
Re: ESP Easy next stable... (release candidates)
Any chance you could update the dead link on page 1 to the correct location? Should be http://www.letscontrolit.com/wiki/index ... candidates not http://www.esp8266.nu/index.php/Main_Pa ... candidates which goes nowhere.
- 07 Oct 2016, 11:48
- Forum: ESP Easy: Software
- Topic: Toggle Relay with Rules?
- Replies: 16
- Views: 35677
Re: Toggle Relay with Rules?
Solved. on relay1#state do if [relay1#state]=1 timerSet 1,2 // 2 second timer endon on Rules#Timer=1 do gpio,13,0 // Turn off relay endon Works a treat in Home Assistant. Update 14th Feb 2017. To prevent the relay from toggling on boot, you need to add a bit of code to the beginning. on System#Boot ...
- 05 Oct 2016, 11:00
- Forum: ESP Easy: Software
- Topic: Toggle Relay with Rules?
- Replies: 16
- Views: 35677
Re: Toggle Relay with Rules?
I'm using an Electrodragon running R121 controlled via MQTT for a garage door controller. Input 1 (switch 1) will be the garage door sensor, relay 1 is the garage door opener. I have it all working fine in Home Assistant but I want to be able to toggle the relay off automatically when it is turned o...
- 12 Aug 2016, 14:44
- Forum: ESP Easy: Software
- Topic: How to ask a ESPeasy device of a GPIO state?
- Replies: 18
- Views: 60942
Re: How to ask a ESPeasy device of a GPIO state?
This is now working as the retain flag option has been added in R121 and it works a treat.
http://www.esp8266.nu/forum/viewtopic.p ... 8545#p8545
http://www.esp8266.nu/forum/viewtopic.p ... 8545#p8545
- 12 Aug 2016, 14:40
- Forum: ESP Easy: Software
- Topic: [Solved] MQTT status feedback
- Replies: 10
- Views: 12257
Re: [Partly solved] MQTT status feedback
I also use mqtt extensively, xbmcnut, could you please guve us sine more info in when tobuse this new option in R121, and when not - to 'retain' ? If you do not publish the 'retain' flag, when a MQTT client connects, it does not know what state the subscribed devices are in until their state change...
- 12 Aug 2016, 14:35
- Forum: ESP Easy: Software
- Topic: [Solved] MQTT status feedback
- Replies: 10
- Views: 12257
Re: [Partly solved] MQTT status feedback
Could you check R121 on github and verify if this solves anything? I've only done some basic tests with the MQTT.fx tool and it seems to work. You need to enable the retain stuff first on /tools/advanced. You Sir are a legend. It is working a treat now and has saved me countless hours of grief. Tha...
- 11 Aug 2016, 11:46
- Forum: ESP Easy: Software
- Topic: [Solved] MQTT status feedback
- Replies: 10
- Views: 12257
Re: [Partly solved] MQTT status feedback
Wow, that is awesome, thank you. That will save me much grief. I'll keep an eye out.
- 11 Aug 2016, 00:13
- Forum: ESP Easy: Software
- Topic: How to ask a ESPeasy device of a GPIO state?
- Replies: 18
- Views: 60942
Re: How to ask a ESPeasy device of a GPIO state?
This doesn't has to be very difficult, have a look at this where they create a template to do this: https://groups.google.com/forum/#!topic/home-assistant-dev/-RqwZPCNbaw See also https://home-assistant.io/components/switch.mqtt/ for more information about a MQTT in HA. This seems significantly mor...
- 10 Aug 2016, 11:27
- Forum: ESP Easy: Software
- Topic: How to ask a ESPeasy device of a GPIO state?
- Replies: 18
- Views: 60942
Re: How to ask a ESPeasy device of a GPIO state?
Testlab setup: Every command that's documented for HTTP should also work if send to .../cmd topic using MQTT. Instead of returning a web page, it reports back to ..../status Thank you, that is awesome to know! I now get the following when I publish to /ESP01/cmd with gpio,14,0. { "log": &...
- 10 Aug 2016, 00:30
- Forum: ESP Easy: Software
- Topic: How to ask a ESPeasy device of a GPIO state?
- Replies: 18
- Views: 60942
Re: How to ask a ESPeasy device of a GPIO state?
It's a system wide command and should work on serial, http and mqtt. For mqtt, send the command as payload to <subscription template>/cmd For mqtt, the result is send on <subscription template>/status Could you possibly clarify the MQTT command for obtaining a GPIO status? You mention <subscription...
- 10 Aug 2016, 00:22
- Forum: ESP Easy: Software
- Topic: [Solved] MQTT status feedback
- Replies: 10
- Views: 12257
Re: [Partly solved] MQTT status feedback
OK. I have configured the same GPIO pin I'm using to drive a LED and controlled with /ESP/01/gpio/14 (0 or 1) as a switch. I've set the name to relay14 and the value name 1 to 'state'. Now, when I control the output with /ESP/01/gpio/14 , I get a message back if I subscribe to /ESP01/relay14/state w...
- 08 Aug 2016, 10:44
- Forum: ESP Easy: Software
- Topic: How to ask a ESPeasy device of a GPIO state?
- Replies: 18
- Views: 60942
Re: How to ask a ESPeasy device of a GPIO state?
I am trying to detect a gpio state using MQTT with /ESP01/status/gpio/14 but I get nothing back when changing the gpio state with mqtt.fx. Is that syntax right? Board is nodemcu running R105. [SOLVED] I simply added a switch and used the same gpio number as the one I'm controlling with MQTT message...
- 05 Aug 2016, 11:00
- Forum: ESP Easy: Software
- Topic: [Solved] MQTT status feedback
- Replies: 10
- Views: 12257
Re: MQTT status feedback
What is linked to the GPIO ? If a Switch, you can let it send info, and it will come back on the MQTT channel. Thanks but nope, GPIO out for relay control. I'm publishing to /ESP01/gpio/14 with 0 or 1 which flips the relay but I expect a reply back on /ESP01/status... or /ESP01/gpio/14/status. Is t...
- 05 Aug 2016, 07:43
- Forum: ESP Easy: Software
- Topic: [Solved] MQTT status feedback
- Replies: 10
- Views: 12257
[Solved] MQTT status feedback
Can't seem to find this anywhere. Does ESPEasy publish a status message when a request to change a GPIO state is received? I'm running R105 on NodeMCU.
- 02 Aug 2016, 05:41
- Forum: ESP Easy: Software
- Topic: OPENHAB-MQTT publish failing by GPIO15,GPIO4 and GPIO5
- Replies: 1
- Views: 2479
Re: OPENHAB-MQTT publish failing by GPIO15,GPIO4 and GPIO5
@espayyan,
What is your subscribe topic in MQTT for the gpio pin state?
What is your subscribe topic in MQTT for the gpio pin state?
- 02 Aug 2016, 04:49
- Forum: ESP Easy: Software
- Topic: How to ask a ESPeasy device of a GPIO state?
- Replies: 18
- Views: 60942
Re: How to ask a ESPeasy device of a GPIO state?
I am trying to detect a gpio state using MQTT with but I get nothing back when changing the gpio state with mqtt.fx. Is that syntax right? Board is nodemcu running R105.
Code: Select all
/ESP01/status/gpio/14
- 12 Apr 2016, 07:52
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 735011
Re: New ESP gadget
Hi, I got 3 sonoff with 5 pin, tried to flash one with espeasy. Always get this error: warning: espcomm_sync failed error: espcomm_open failed error: espcomm_upload_mem failed Can anybody help here? Regards Hubert Had this today on several units. Hold down the button, plug in the USB and continue t...
- 01 Apr 2016, 04:08
- Forum: ESP Easy: Software
- Topic: R95 error when compiling
- Replies: 3
- Views: 4709
Re: R95 error when compiling
Move folder 'TinyI2CWatchdog' out of \Source\ESPEasy\, close Adruino, open again and it should work now.
- 01 Apr 2016, 03:30
- Forum: ESP Easy: Software
- Topic: Tutorial ESPEasy / OpenHAB problem
- Replies: 12
- Views: 16219
Re: Tutorial ESPEasy / OpenHAB problem
Thanks for your help. Works flawlessly now.dabe5 wrote:I have no problems to switch the gpio on/off withand payload 0 / 1Code: Select all
/ESP-OG01/gpio/14
orand payload from 0 to 1000 for dimming the LEDCode: Select all
/ESP-OG01/pwm/14
but I never tried with GPIO 2.
I use GPIO 12, 13 and 14
- 31 Mar 2016, 22:59
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 297394
Re: ESP Easy Releases
Thanks. I had removed the folder several times but without closing Arduino! Removed and reopened and it compiled just fine.micha wrote:
just move folder TinyI2CWatchdog out of ESPEasy project. That solved this error for me...
BTW: what is the need/use for TinyI2CWatchdog ?
- 31 Mar 2016, 13:22
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 297394
Re: ESP Easy Releases
Trying to compile R92 using instructions here http://www.esp8266.nu/index.php/Tutorial_Arduino_Firmware_Upload and get the following error. sketch\TinyI2CWatchdog\TinyWireS_Custom\usiTwiSlave.c:41:20: fatal error: avr/io.h: No such file or directory #include <avr/io.h> 1.6.8 Portable with 2.10 and b...
- 27 Mar 2016, 05:37
- Forum: Introduce yourself
- Topic: Hello from New Zealand
- Replies: 2
- Views: 5851
Re: Hello from New Zealand
Thanks, I will certainly assist where I can.
- 20 Mar 2016, 10:33
- Forum: ESP Easy: Software
- Topic: Tutorial ESPEasy / OpenHAB problem
- Replies: 12
- Views: 16219
Re: Tutorial ESPEasy / OpenHAB problem
Thanks for the advice. I'll try that tomorrow.
- 19 Mar 2016, 11:24
- Forum: ESP Easy: Software
- Topic: Tutorial ESPEasy / OpenHAB problem
- Replies: 12
- Views: 16219
Re: Tutorial ESPEasy / OpenHAB problem
@dabe5 Yes, that is why I'm puzzled. When I publish without anything else, the internal blue LED turns on. Sending 0 or 1 in the payload makes no difference and I have to reset the board to get the LED to turn off.
Code: Select all
/PetesESP8266/gpio/2
- 17 Mar 2016, 09:01
- Forum: Introduce yourself
- Topic: Hello from New Zealand
- Replies: 2
- Views: 5851
Hello from New Zealand
Hi there, Long time tinkerer, first time ESP user. On a voyage of discovery to replace by ageing Vera UI5 system with something that is a bit more flexible and came across ESP Easy today so very happy about that. Planning on deploying OpenHAB2 on my Synology NAS along with Mosquito (done and done) b...
- 17 Mar 2016, 08:56
- Forum: ESP Easy: Software
- Topic: Tutorial ESPEasy / OpenHAB problem
- Replies: 12
- Views: 16219
Re: Tutorial ESPEasy / OpenHAB problem
Hi guys. I too have set this demo up today with R78. I am using MQTT.fx to get status updates from the ESP every 60s on the channel /PetesESP8266/# and this works flawlessly. Tonight I wanted to try publishing to turn the internal blue LED on but when I publish this /PetesESP8266/gpio/2 , the blue L...