Search found 22 matches
- 09 Jan 2020, 17:49
- Forum: ESP Easy: Software
- Topic: Serial MCU controlled relay/switch
- Replies: 459
- Views: 1061115
Re: Serial MCU controlled relay/switch
Finally I got it working. The dimmer readings are still inconstant in example set to 185 read 85 or other values but the "relay" state (Relay0) works and the last state is restored after reboot or restart if the last command origin was the touch button too. Here is the rules if somebody is...
- 31 Dec 2019, 16:26
- Forum: ESP Easy: Software
- Topic: Serial MCU controlled relay/switch
- Replies: 459
- Views: 1061115
Re: Serial MCU controlled relay/switch
I checked TX and RX and it all seams fine. But still no readings from the tuya mcu.
- 31 Dec 2019, 12:52
- Forum: ESP Easy: Software
- Topic: Serial MCU controlled relay/switch
- Replies: 459
- Views: 1061115
Re: Serial MCU controlled relay/switch
Hello, I just flashed the plugin on a Tuya wall dimmer (1 gang dimmer Board labeled with YDM_WIFI_SV4). Which was very painful because i had to cut the RX trace on the PCB to make it work. Sending command work but after every command the MQTT connection is lost. Working (somehow) with tuya / dimmer#...
- 13 Oct 2019, 11:06
- Forum: ESP Easy: Software
- Topic: new homie controller & plug-in (C014 & P086)
- Replies: 4
- Views: 8375
Re: new homie controller & plug-in (C014 & P086)
Perhaps the docs can help:
https://espeasy.readthedocs.io/en/lates ... #c014-page
https://espeasy.readthedocs.io/en/lates ... #p086-page
This should do all the homie stuff for you.
https://espeasy.readthedocs.io/en/lates ... #c014-page
https://espeasy.readthedocs.io/en/lates ... #p086-page
This should do all the homie stuff for you.
- 04 Oct 2019, 13:00
- Forum: ESP Easy: Software
- Topic: new homie controller & plug-in (C014 & P086)
- Replies: 4
- Views: 8375
Re: new homie controller & plug-in (C014 & P086)
Sorry for the delay ... still work in progress. I think you still have to wait a bit. I had to finish the contrib-homie-convention node first. So in the meantime you can tryout the new node (this is my first custom node and a early beta / if not alpha) https://flows.nodered.org/node/node-red-contrib...
- 17 Sep 2019, 17:11
- Forum: ESP Easy: General Discussion
- Topic: mqtt cant receive gpio command
- Replies: 18
- Views: 19499
Re: mqtt cant receive gpio command
And he couldn’t use C014 because it is in the develop build and not in the normal one (I think)
- 17 Sep 2019, 17:06
- Forum: ESP Easy: General Discussion
- Topic: mqtt cant receive gpio command
- Replies: 18
- Views: 19499
Re: mqtt cant receive gpio command
I am ;) Nothing to be changed. If somebody uses the homie controller they have to stick with the homie convention. As described. It can do the Job and I use it in several devices - even without a homie compatible controller. You just have to stay with the naming convention like starting with home/ a...
- 17 Sep 2019, 15:23
- Forum: ESP Easy: General Discussion
- Topic: mqtt cant receive gpio command
- Replies: 18
- Views: 19499
Re: mqtt cant receive gpio command
See https://espeasy.readthedocs.io/en/latest/Controller/C014.html#c014-page The docs page referes to the homie convention controller. The mqtt topic for gpio here is defined as: homie/%unitName%/SYSTEM/gpio#/set The GPIO port must be set to default low or default high in the hardware tab to be incl...
- 13 Sep 2019, 18:31
- Forum: ESP Easy: Software
- Topic: Rules: Clock#Time - possible to compare with a variable?
- Replies: 17
- Views: 18428
Re: Rules: Clock Time - possible to compare with a variable?
I Register the homie Received device as a Parameter Type integer, or float, or string, it always stores the payload not as 12, but as 12.00. thus - I cannot use it as a time variable..... Float values should be passed via %eventvalue% correctly as float by the homie plugin. There will be an updated...
- 13 Sep 2019, 18:10
- Forum: ESP Easy: Software
- Topic: Homie Receiver P086 ~ Can I use their stored variables in formulaes?
- Replies: 2
- Views: 7127
Re: Homie Receiver P086 ~ Can I use their stored variables in formulaes?
Hi, sorry for come back to you so late. I`m not very often on the forum (more scanning github) I currently working on an updated version of the homie plugins and a full features custom homie node for Node-RED please try to use on durLeg1 do instead of on homieRec3#durLeg1 do I plan a new pull reques...
- 12 May 2019, 10:17
- Forum: ESP Easy: Software
- Topic: Homie / openHAB 2.4 autodiscover compatibility
- Replies: 4
- Views: 5284
Re: Homie / openHAB 2.4 autodiscover compatibility
A controller plugin for the Homie MQTT convention is available. Documentation can be found here: Read the Docs ...
This is an early Beta version! Would be nice if anybody can give it a try.
This is an early Beta version! Would be nice if anybody can give it a try.
- 27 Feb 2019, 09:48
- Forum: ESP Easy: Software
- Topic: Homie / openHAB 2.4 autodiscover compatibility
- Replies: 4
- Views: 5284
Re: Homie / openHAB 2.4 autodiscover compatibility
Hi, thank you for your quick reply.
so I head over to issue 1314 on github ...
so I head over to issue 1314 on github ...
- 26 Feb 2019, 19:30
- Forum: ESP Easy: Software
- Topic: Homie / openHAB 2.4 autodiscover compatibility
- Replies: 4
- Views: 5284
Homie / openHAB 2.4 autodiscover compatibility
Dear All, I currently start my home automation new from scratch. The "old" system was based on openHAB 1.8 and mosquitto MQTT server and a lot of openHAB code. I waited a wile until openHAB 2.x settled. Recently I discovered that with Version 2.4 openHAB committed to MQTT by integrating a ...
- 04 Dec 2016, 12:12
- Forum: ESP Easy: Hardware
- Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
- Replies: 146
- Views: 233877
Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
I found this video on YouTube- perhaps it is usefull:
https://youtu.be/hv_FpBqWFrg
Unfortunately the sonoff pow is currently sold out (again!) so I have to wait a little bit longer for own tests.
https://youtu.be/hv_FpBqWFrg
Unfortunately the sonoff pow is currently sold out (again!) so I have to wait a little bit longer for own tests.
- 10 May 2016, 08:21
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2155573
Re: Nextion display plugin
Highly apreciate! As these Displays comes with their own mcu on board the esp part should be very lightweight!
First a bridge between mqtt and the display would be nice.
Chris
First a bridge between mqtt and the display would be nice.
Chris
- 20 Apr 2016, 12:02
- Forum: ESP Easy: General Discussion
- Topic: MQTT gpio switching info
- Replies: 7
- Views: 15772
Re: MQTT gpio switching info
another question: is there a way to send a pulse of some milliseconds to the gpio pin via MQTT too. I try to avoid http and have all communication via MQTT because it is easier to debug via MQTT spy or MQTT.fx It's working via http: http://<ESP IP address>/control?cmd=Pulse,<pin>,<state>,<duration> ...
- 01 Apr 2016, 14:54
- Forum: ESP Easy: General Discussion
- Topic: Reliability, Wifi & Mesh Network ...
- Replies: 8
- Views: 19675
Reliability, Wifi & Mesh Network ...
Hello, I love your project and really appreciate your work. Nevertheless I always have trouble with reliability of my sensor network. I planned to install sensor nodes in my greenhouse, external building, cellar, roof ... but I stopped the project due to various problems which all has to do with the...
- 27 Mar 2016, 13:55
- Forum: ESP Easy: General Discussion
- Topic: Problems with (BME280) - actually reconnecting WIFI!
- Replies: 6
- Views: 8429
Re: Problems with (BME280) - actually reconnecting WIFI!
After more research I found the fallback to AP Mode. I think there must be a better solution especially for hidden sensors where it is difficult to do a cold restart (i.e. false ceilings or in my greenhouse) There must be a timeout for ap-mode too to give the sensor a chance to try to reconnect to t...
- 27 Mar 2016, 12:35
- Forum: ESP Easy: General Discussion
- Topic: Problems with (BME280) - actually reconnecting WIFI!
- Replies: 6
- Views: 8429
Re: Problems with BME280
Hello again, I've tested several power supply solutions. Finally I found that it is actually NOT a power supply issue here. When I installed 2 ESPs with the same sensor setup they both whent offline after some hours working and never recovered. There must be a connection between both = WLAN connecti...
- 22 Mar 2016, 07:52
- Forum: ESP Easy: Hardware
- Topic: BME280 Connection
- Replies: 15
- Views: 15706
Re: BME280 Connection
short question: Is it possible to connect two bme280 with different ids?
I like to measure indoor and outdoor values.
I like to measure indoor and outdoor values.
- 22 Mar 2016, 07:43
- Forum: ESP Easy: General Discussion
- Topic: Problems with (BME280) - actually reconnecting WIFI!
- Replies: 6
- Views: 8429
Re: Problems with BME280
Thank you for your help. Will try next Weekend!
- 21 Mar 2016, 09:16
- Forum: ESP Easy: General Discussion
- Topic: Problems with (BME280) - actually reconnecting WIFI!
- Replies: 6
- Views: 8429
Problems with (BME280) - actually reconnecting WIFI!
Hello from Germany. First I want to thank you for your great project! Amazing what you managed to do with this little MCU. Myself I was trying to get some sensors working with LUA scripts and always had problems with the limited resources. Setting up am ModeMCU ESP12e together with an BME280 sending...