Search found 77 matches

by timsson
11 Sep 2018, 14:14
Forum: ESP Easy: Software
Topic: PN532 TagReader - only UID information?
Replies: 0
Views: 150

PN532 TagReader - only UID information?

Hello, I use the PN532 (red square) module - it work's very well - fine! I use it as dooropener, but all Sony Mobilephones use the same UID-Tag and Samsung Mobiles rotating the TAG - it's not really possible to use this mechanism to open doors :D Every mifare/NFC chip can write and read any user tag...
by timsson
26 May 2017, 17:26
Forum: ESP Easy: Software
Topic: Victron MPPT - Ser2Net
Replies: 0
Views: 483

Victron MPPT - Ser2Net

Hi, how can i modify the Ser2net plugin to send Status Infos (SER,FW,V,I ...) via mqtt to openhab? Thanks! dev/ttyUSB0: PID:0xA042 FW:119 SER#:HQ******** V:25660 I:500 VPV:53270 PPV:14 CS:3 ERR:0 LOAD:ON H19:3348 H20:1 H21:17 H22:33 H23:167 HSDS:52 PID: "0x203" ("BMV-700"); "0x204" ("BMV-702"); "0x2...
by timsson
08 Jan 2017, 10:53
Forum: ESP Easy: Software
Topic: ESP Easy next stable... (release candidates)
Replies: 155
Views: 36917

ESPEasyMega R146/148 status

.. [s] status gpio,2 - not working correct....[/s]

sorry my faulty - i don't set the status firstly:
gpio,2,1 and then
status gpio,2
it work's - sorry
by timsson
04 Jan 2017, 23:47
Forum: ESP Easy: Software
Topic: Can't set GPIO to LOW.
Replies: 5
Views: 1402

Re: Can't set GPIO to LOW.

so you set gpio 13 low - fine :) and now with mqtt http://x.x.x.x/tools?cmd=Publish+/name/gpio/2,1 http://x.x.x.x/tools?cmd=Publish+/name/gpio/2,0 ? Subscribe Template: /%sysname%/# Publish Template: /%sysname%/%tskname%/%valname% MQTT Retain Msg: enable? what do you see at the boker? somethink like...
by timsson
19 Dec 2016, 15:28
Forum: Experimental
Topic: ESP Easy Mega
Replies: 249
Views: 92170

Re: ESP Easy Mega

Hello,
I try the wemos-sd-shield-mini, it does not work. Which pin do you use?
Thanks
by timsson
15 Dec 2016, 23:39
Forum: ESP Easy: Hardware
Topic: SONOFF TOUCH - Did you see it?
Replies: 33
Views: 11127

Re: SONOFF TOUCH - Did you see it?

Thanks! :D
by timsson
15 Dec 2016, 18:07
Forum: ESP Easy: Hardware
Topic: SONOFF TOUCH - Did you see it?
Replies: 33
Views: 11127

Re: SONOFF TOUCH - Did you see it?

... Can i flash easyesp by my self? Do you have a pinout (TX,RX,GND,Vin,Gpio0) or a picture from inside?
Thanks
by timsson
15 Dec 2016, 16:12
Forum: ESP Easy: Hardware
Topic: SONOFF TOUCH - Did you see it?
Replies: 33
Views: 11127

Re: SONOFF TOUCH - Did you see it?

?It works with espeasy?
by timsson
13 Dec 2016, 22:41
Forum: Experimental
Topic: ESP Easy Mega
Replies: 249
Views: 92170

Re: ESP Easy Mega

I test it today, very good + comfortable for me. perhaps a "button/switch"-page possible?
by timsson
12 Dec 2016, 15:51
Forum: Experimental
Topic: Nano Easy
Replies: 9
Views: 3905

Re: Nano Easy

... works
but, it is to hard for me implement mqtt correct..
is this the right library? https://github.com/njh/NanodeMQTT
nano.JPG
nano.JPG (24.21 KiB) Viewed 3805 times
by timsson
08 Dec 2016, 20:07
Forum: Experimental
Topic: Arduino Easy 2560
Replies: 114
Views: 24786

Re: Arduino Easy 2560

sluggy -> but first impression: super :!:


little problems:
- if i plug out the ethernet connection, the broker is not reconnecting?
(but the gui/http connection goes up)
mqtt.JPG
mqtt.JPG (23.56 KiB) Viewed 3637 times
- a rule with publish don't work...
rules.JPG
rules.JPG (11.09 KiB) Viewed 3636 times
by timsson
08 Dec 2016, 16:20
Forum: Experimental
Topic: Arduino Easy 2560
Replies: 114
Views: 24786

Re: Arduino Easy 2560

ohh, it's sounds nonetheless good... i use mqtt with openhab - can i change from Domoticz to openhab by myself?
(maybe _C02.ino <-> _C05.ino?)
Can i test your files?

P.S. the megashield runs a long time without connection problems :D
I use only gpio2 + gpio3 and A1....
_20161208_161717~01~01.jpg
_20161208_161717~01~01.jpg (23.35 KiB) Viewed 3647 times
by timsson
06 Dec 2016, 10:45
Forum: ESP Easy: Software
Topic: Stepper Motor
Replies: 30
Views: 8792

Re: Stepper Motor

+1
by timsson
05 Dec 2016, 18:22
Forum: ESP Easy: General Discussion
Topic: Problem with Wifi Settings
Replies: 3
Views: 1006

Re: Problem with Wifi Settings

connect Tx+Rx + off/on -> reset
by timsson
30 Nov 2016, 14:14
Forum: Experimental
Topic: Arduino Easy 2560
Replies: 114
Views: 24786

Re: Arduino Easy 2560

... but many questions :)
- how can i add openhab/mqtt support????
- i2c scan lists a lot of devices - why?
- devices - if i add more then one - the name is changing?
and how can i add/remove i/o pins...
device.JPG
device.JPG (41.17 KiB) Viewed 6005 times
But i think, it will be great - THX!
by timsson
25 Nov 2016, 18:23
Forum: ESP Easy: Hardware
Topic: New ESP gadget
Replies: 317
Views: 117788

Re: New ESP gadget

https://www.itead.cc/wiki/Sonoff_Dual
How can i togggle/switch the 2 relay?
Thanks
by timsson
24 Nov 2016, 17:14
Forum: ESP Easy: Software
Topic: WLAN scan - how can i select a AP?
Replies: 3
Views: 1116

Re: WLAN scan - how can i select a AP?

Try <ip address> /setup That should let you select the AP, but not sure what it will do if you restart it.. I will have to play with this, after I get done moving. ... thanks so i'm not alone ;) but ip/setup, no chance to change... Is hopping a feature from AP or client? ESP is connected and using ...
by timsson
23 Nov 2016, 21:17
Forum: ESP Easy: Software
Topic: WLAN scan - how can i select a AP?
Replies: 3
Views: 1116

WLAN scan - how can i select a AP?

Hello,
i have 2AP - connected via PLC(Powerline).
How can i change the AP? The ESP connected the "wrong" AP....
Both have the same ssid and pw?
Thanks
wlan.jpg
wlan.jpg (11.83 KiB) Viewed 1116 times
wlan1.jpg
wlan1.jpg (15.41 KiB) Viewed 1116 times
by timsson
20 Nov 2016, 17:51
Forum: Experimental
Topic: Arduino Easy 2560
Replies: 114
Views: 24786

Re: Arduino Easy 2560

Martinus wrote:Sneak preview available on:
http://www.letscontrolit.com/wiki/index.php/ArduinoEasy
:D :D :D !



only a question - i know, nano has only 32k flash, but it is possible run a minimal config(only i/o pin) on nano?
nano.jpg
nano.jpg (6.26 KiB) Viewed 6181 times
by timsson
15 Nov 2016, 21:26
Forum: ESP Easy: General Discussion
Topic: MQTT Import
Replies: 50
Views: 32398

Re: MQTT Import

Hello,
Unfortunately I still have my problem.
Could someone help me to send a text with mqtt to the display?
Thanks
by timsson
12 Nov 2016, 23:35
Forum: ESP Easy: Software
Topic: Newbie Rules Question
Replies: 7
Views: 1892

Re: Newbie Rules Question

StephenF wrote:Several posts showing you cannot subscribe to MQTT published data on ESPEasy. ......
endon
https://github.com/ESP8266nu/ESPEasyPlu ... Import.ino
by timsson
07 Nov 2016, 23:01
Forum: Experimental
Topic: Arduino Easy 2560
Replies: 114
Views: 24786

Re: Arduino Easy 2560

Ohhhh, i have also two old 2560 with ethernet shield...
And i like the concept and gui from the espeasy very much!
Please, can you share the experimental files?
...maybe i can switch 2 or 3 gpio for relays only..... :lol:
regards Tom
by timsson
03 Nov 2016, 22:44
Forum: ESP Easy: Hardware
Topic: New ESP gadget
Replies: 317
Views: 117788

Re: New ESP gadget

I can only confirm that I have no issues with the 5 pin Sonoff with the RF module (i don't use RF in the moment....)
It works fine!
R142
by timsson
02 Nov 2016, 17:19
Forum: ESP Easy: Software
Topic: Openhab MQTT not set switch
Replies: 1
Views: 1015

Re: Openhab MQTT not set switch

Hi,
can you tesing 3 things?
-whats with gipio direktly: mqtt="<[mosquitto:/newdevice/gpio/2:state:MAP(onoff.map)],
-do you use the right openhab, ip and user/password at the config-site?
-whats with Tools/command: publish /newdevice/gpio/2,1?
regards Tim
by timsson
02 Nov 2016, 07:33
Forum: ESP Easy: Hardware
Topic: gizwits board - anybody has one?
Replies: 16
Views: 3718

Re: gizwits board - anybody has one?

BertB wrote:Are you sure power is ok?
If so, I think i'd try the oldest stable version First.
I had the same problem, it was only the power....
by timsson
28 Oct 2016, 10:30
Forum: ESP Easy: Software
Topic: Newbie Rules Question
Replies: 7
Views: 1892

Re: Newbie Rules Question

smathur wrote: ..MQTT message "/ESP1/aaa/bbb 1".
What is the event syntax in ESPEasy Rules that I need for the above message?
on <event> do
publish /ESP1/aaa/bbb,1
endon
by timsson
27 Oct 2016, 11:13
Forum: ESP Easy: Projects / Applications
Topic: Wifi Candle - illuminate with ESPEasy (WS2812)
Replies: 95
Views: 49014

Re: Wifi Candle - illuminate with ESPEasy (WS2812)

I uploaded my basic test plugin for neopixel in the playground: https://github.com/ESP8266nu/ESPEasyPluginPlayground/blob/master/_P122_NeoPixel.ino Use rules commands to control single WS2812 leds into any color: neoPixel <led nr>,<red>,<green>,<blue> Who can change the code to use it with mqtt? it...
by timsson
26 Oct 2016, 22:36
Forum: ESP Easy: Software
Topic: Rules examples
Replies: 41
Views: 25885

Re: Rules examples

iron wrote:The "not so obvious" part is that you have to declare that gpio as an input switch.
Check this thread :
http://www.esp8266.nu/forum/viewtopic.php?f=6&t=2039
ohh.... thanks!
an other question:
timerSet,1,random(120,600) possible???
by timsson
26 Oct 2016, 20:23
Forum: ESP Easy: Projects / Applications
Topic: Wifi Candle - illuminate with ESPEasy (WS2812)
Replies: 95
Views: 49014

Re: Wifi Candle - illuminate with ESPEasy (WS2812)

Hello,
thank you very much, great work moelski!!!
I tested it, is works stabil!
Martinus your plugin is also fine - 123 rules and voala "strandtest" :D :D :D
https://youtu.be/Sir6EZxYMpc
candle1.JPG
candle1.JPG (40.04 KiB) Viewed 8728 times
candle2.jpg
candle2.jpg (32.78 KiB) Viewed 8728 times
candle3.JPG
candle3.JPG (157.71 KiB) Viewed 8692 times
Thanks
by timsson
25 Oct 2016, 20:59
Forum: ESP Easy: Software
Topic: Actuating Relays via http: Security implications?
Replies: 1
Views: 729

Re: Actuating Relays via http: Security implications?

Hello,
do you find a way to switch your gpio from a protected easyesp?

Code: Select all

http://  admin:admin@ <ESP IP address>/control?cmd=GPIO,<pin>,1. 
dont work
Thanks
by timsson
22 Oct 2016, 19:11
Forum: ESP Easy: Software
Topic: Rules examples
Replies: 41
Views: 25885

gpio in rules?

Hi,
how can i make a rule with gpios?

on gpio,2#state = 1 do // ?????
......
endon
by timsson
20 Oct 2016, 09:07
Forum: ESP Easy: Software
Topic: Wiki update Arduino IDE tutorial
Replies: 2
Views: 832

Re: Wiki update Arduino IDE tutorial

Hello,
I ve got a ESP-07 with 1024Flash
What is the "right" SPIFFS size at Arduino 1.6.12? (1M 64k-512k SPIFFS ?)
Thanks
by timsson
19 Oct 2016, 23:31
Forum: ESP Easy: Software
Topic: simple button page?
Replies: 0
Views: 598

simple button page?

Is it possible to integrate a simple button page? I have 2 wifinetworks without server and i toggle still with http://ip/tools?cmd=gpio,5,0 it should be nice easier clearer to have a own espeasy-site... 2 or 4 buttons are enough, perhaps a seperatly page at the top :roll: :roll: :roll: ? maybe with ...
by timsson
16 Oct 2016, 11:53
Forum: ESP Easy: Software
Topic: MLX90614 on a display
Replies: 3
Views: 746

Re: MLX90614 on a display

... take/change the name and values without space:
[BBQ_SENSOR#Temperature] C
by timsson
16 Oct 2016, 00:51
Forum: ESP Easy: Projects / Applications
Topic: Wifi Candle - illuminate with ESPEasy (WS2812)
Replies: 95
Views: 49014

Re: Wifi Candle - illuminate with ESPEasy (WS2812)

:shock: :D :mrgreen: - where can i find a link to the ino?
How do you wired the strips?
Can i use the ino for a ring of 16led?
Thank you in anticipation!
by timsson
16 Oct 2016, 00:44
Forum: ESP Easy: General Discussion
Topic: Logging Data to an SD card
Replies: 19
Views: 6932

Re: Logging Data to an SD card

moelski wrote: Where do you want to read a file? In ESPEasy?
For which reason?
no, the best way for me, file download from ESPEasy someway
why? - because i can't remove my sd-card - its in a case...
Thanks
by timsson
15 Oct 2016, 19:01
Forum: ESP Easy: General Discussion
Topic: Logging Data to an SD card
Replies: 19
Views: 6932

Re: Logging Data to an SD card

... for me nearly perfect in a standalone network without openhab!
I use the wemos mini with sdboard...
perhaps a possibility to reading the files?
Thanks al lot
by timsson
12 Oct 2016, 21:32
Forum: ESP Easy: Projects / Applications
Topic: ESP8266 based WordClock
Replies: 4
Views: 2576

Re: ESP8266 based WordClock

Hello,
... christmas is coming :)
How can "i" modify your script that we send with mqtt or/and http different sequences to a ring or stripe (WS2812)
maybe
on/off, brightness, color, rainbow ...
Who can help?
by timsson
07 Oct 2016, 01:01
Forum: ESP Easy: General Discussion
Topic: Logging Data to an SD card
Replies: 19
Views: 6932

Re: Logging Data to an SD card

:shock: cool!
maybe file save or sendto....
by timsson
30 Sep 2016, 15:07
Forum: ESP Easy: Hardware
Topic: New ESP Device found - ESP8266 WiFi Relay V3.1
Replies: 3
Views: 2378

Re: New ESP Device found - ESP8266 WiFi Relay V3.1

Is the Flash Size 512/1024 or 4096?
by timsson
25 Sep 2016, 23:23
Forum: ESP Easy: Software
Topic: Push button?
Replies: 0
Views: 605

Push button?

Hello,
How can I realize a push button?
Or is this the the same problem like on a rotary?

Thanks
by timsson
25 Sep 2016, 01:19
Forum: ESP Easy: Software
Topic: HX711
Replies: 5
Views: 1940

Re: HX711

... a good description and library for a load cell
http://blog.squix.org/2016/07/esp8266-t ... art-1.html
by timsson
11 Sep 2016, 15:42
Forum: ESP Easy: General Discussion
Topic: OLED Scrolling Display
Replies: 111
Views: 65363

Re: OLED Scrolling Display

... a litte bug:
If you use the same topic twice or 3 time - the oled show nothing :(
(i use openhab mqtt - R131, frameOled v0.4)
-----
Line 1: [sys#wifi]
Line 2: [sys#uptime]
Line 3: [sys#freeram]
by timsson
06 Sep 2016, 23:26
Forum: ESP Easy: Software
Topic: HX711
Replies: 5
Views: 1940

Re: HX711

+1 from me too :)
by timsson
25 Aug 2016, 10:06
Forum: ESP Easy: General Discussion
Topic: Reliability, Wifi & Mesh Network ...
Replies: 8
Views: 12863

Re: Reliability, Wifi & Mesh Network ...

:o where can i find the libraries to testing the demoToy.ino (neopixel)? easyWebSocket.h easyWebServer.h P.S. - i found it at your github... and it works :), but not stabil - i will it testing longer --- yes it works stabil. Is there a posibility to get out the: wifilevel connection time and is it p...