Search found 77 matches
- 11 Sep 2018, 14:14
- Forum: ESP Easy: Software
- Topic: PN532 TagReader - only UID information?
- Replies: 0
- Views: 2210
PN532 TagReader - only UID information?
Hello, I use the PN532 (red square) module - it work's very well - fine! I use it as dooropener, but all Sony Mobilephones use the same UID-Tag and Samsung Mobiles rotating the TAG - it's not really possible to use this mechanism to open doors :D Every mifare/NFC chip can write and read any user tag...
- 26 May 2017, 17:26
- Forum: ESP Easy: Software
- Topic: Victron MPPT - Ser2Net
- Replies: 0
- Views: 1928
Victron MPPT - Ser2Net
Hi, how can i modify the Ser2net plugin to send Status Infos (SER,FW,V,I ...) via mqtt to openhab? Thanks! dev/ttyUSB0: PID:0xA042 FW:119 SER#:HQ******** V:25660 I:500 VPV:53270 PPV:14 CS:3 ERR:0 LOAD:ON H19:3348 H20:1 H21:17 H22:33 H23:167 HSDS:52 PID: "0x203" ("BMV-700"); "...
- 08 Jan 2017, 10:53
- Forum: ESP Easy: Software
- Topic: ESP Easy next stable... (release candidates)
- Replies: 155
- Views: 122301
ESPEasyMega R146/148 status
.. [s] status gpio,2 - not working correct....[/s]
sorry my faulty - i don't set the status firstly:
gpio,2,1 and then
status gpio,2
it work's - sorry
sorry my faulty - i don't set the status firstly:
gpio,2,1 and then
status gpio,2
it work's - sorry
- 04 Jan 2017, 23:47
- Forum: ESP Easy: Software
- Topic: Can't set GPIO to LOW.
- Replies: 5
- Views: 5894
Re: Can't set GPIO to LOW.
so you set gpio 13 low - fine :) and now with mqtt http://x.x.x.x/tools?cmd=Publish+/name/gpio/2,1 http://x.x.x.x/tools?cmd=Publish+/name/gpio/2,0 ? Subscribe Template: /%sysname%/# Publish Template: /%sysname%/%tskname%/%valname% MQTT Retain Msg: enable? what do you see at the boker? somethink like...
- 04 Jan 2017, 22:31
- Forum: ESP Easy: Software
- Topic: Can't set GPIO to LOW.
- Replies: 5
- Views: 5894
Re: Can't set GPIO to LOW.
... what's about with: http://xxx.xxx.xxx.xxx/tools?cmd=gpio,13,1 http://xxx.xxx.xxx.xxx/tools?cmd=gpio,13,0 wich pinmode do you use? http://xxx.xxx.xxx.xxx/hardware only gpio13 or all pins? test the led with http://xxx.xxx.xxx.xxx/tools?cmd=gpio,2,0 -> on http://xxx.xxx.xxx.xxx/tools?cmd=gpio,2,1
- 19 Dec 2016, 15:28
- Forum: Experimental
- Topic: ESP Easy Mega
- Replies: 249
- Views: 720521
Re: ESP Easy Mega
Hello,
I try the wemos-sd-shield-mini, it does not work. Which pin do you use?
Thanks
I try the wemos-sd-shield-mini, it does not work. Which pin do you use?
Thanks
- 15 Dec 2016, 23:39
- Forum: ESP Easy: Hardware
- Topic: SONOFF TOUCH - Did you see it?
- Replies: 33
- Views: 36437
- 15 Dec 2016, 18:07
- Forum: ESP Easy: Hardware
- Topic: SONOFF TOUCH - Did you see it?
- Replies: 33
- Views: 36437
Re: SONOFF TOUCH - Did you see it?
... Can i flash easyesp by my self? Do you have a pinout (TX,RX,GND,Vin,Gpio0) or a picture from inside?
Thanks
Thanks
- 15 Dec 2016, 16:12
- Forum: ESP Easy: Hardware
- Topic: SONOFF TOUCH - Did you see it?
- Replies: 33
- Views: 36437
Re: SONOFF TOUCH - Did you see it?
?It works with espeasy?
- 13 Dec 2016, 22:41
- Forum: Experimental
- Topic: ESP Easy Mega
- Replies: 249
- Views: 720521
Re: ESP Easy Mega
I test it today, very good + comfortable for me. perhaps a "button/switch"-page possible?
- 12 Dec 2016, 15:51
- Forum: Experimental
- Topic: Nano Easy
- Replies: 9
- Views: 21242
Re: Nano Easy
... works
but, it is to hard for me implement mqtt correct..
is this the right library? https://github.com/njh/NanodeMQTT
but, it is to hard for me implement mqtt correct..
is this the right library? https://github.com/njh/NanodeMQTT
- 08 Dec 2016, 20:07
- Forum: Experimental
- Topic: Arduino Easy 2560
- Replies: 130
- Views: 187135
Re: Arduino Easy 2560
sluggy -> but first impression: super
little problems:
- if i plug out the ethernet connection, the broker is not reconnecting?
(but the gui/http connection goes up) - a rule with publish don't work...
little problems:
- if i plug out the ethernet connection, the broker is not reconnecting?
(but the gui/http connection goes up) - a rule with publish don't work...
- 08 Dec 2016, 16:20
- Forum: Experimental
- Topic: Arduino Easy 2560
- Replies: 130
- Views: 187135
Re: Arduino Easy 2560
ohh, it's sounds nonetheless good... i use mqtt with openhab - can i change from Domoticz to openhab by myself? (maybe _C02.ino <-> _C05.ino?) Can i test your files? P.S. the megashield runs a long time without connection problems :D I use only gpio2 + gpio3 and A1.... _20161208_161717~01~01.jpg
- 06 Dec 2016, 10:45
- Forum: ESP Easy: Software
- Topic: Stepper Motor
- Replies: 36
- Views: 51572
- 05 Dec 2016, 18:22
- Forum: ESP Easy: General Discussion
- Topic: Problem with Wifi Settings
- Replies: 3
- Views: 3722
Re: Problem with Wifi Settings
connect Tx+Rx + off/on -> reset
- 30 Nov 2016, 14:14
- Forum: Experimental
- Topic: Arduino Easy 2560
- Replies: 130
- Views: 187135
Re: Arduino Easy 2560
... but many questions
- how can i add openhab/mqtt support????
- i2c scan lists a lot of devices - why?
- devices - if i add more then one - the name is changing?
and how can i add/remove i/o pins...
But i think, it will be great - THX!
- how can i add openhab/mqtt support????
- i2c scan lists a lot of devices - why?
- devices - if i add more then one - the name is changing?
and how can i add/remove i/o pins...
But i think, it will be great - THX!
- 25 Nov 2016, 18:23
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 710915
- 24 Nov 2016, 17:14
- Forum: ESP Easy: Software
- Topic: WLAN scan - how can i select a AP?
- Replies: 3
- Views: 4132
Re: WLAN scan - how can i select a AP?
Try <ip address> /setup That should let you select the AP, but not sure what it will do if you restart it.. I will have to play with this, after I get done moving. ... thanks so i'm not alone ;) but ip/setup, no chance to change... Is hopping a feature from AP or client? ESP is connected and using ...
- 23 Nov 2016, 21:17
- Forum: ESP Easy: Software
- Topic: WLAN scan - how can i select a AP?
- Replies: 3
- Views: 4132
WLAN scan - how can i select a AP?
Hello,
i have 2AP - connected via PLC(Powerline).
How can i change the AP? The ESP connected the "wrong" AP....
Both have the same ssid and pw?
Thanks
i have 2AP - connected via PLC(Powerline).
How can i change the AP? The ESP connected the "wrong" AP....
Both have the same ssid and pw?
Thanks
- 20 Nov 2016, 17:51
- Forum: Experimental
- Topic: Arduino Easy 2560
- Replies: 130
- Views: 187135
Re: Arduino Easy 2560
!Martinus wrote:Sneak preview available on:
http://www.letscontrolit.com/wiki/index.php/ArduinoEasy
only a question - i know, nano has only 32k flash, but it is possible run a minimal config(only i/o pin) on nano?
- 16 Nov 2016, 20:39
- Forum: ESP Easy: Projects / Applications
- Topic: Wifi relay with button
- Replies: 2
- Views: 3854
- 15 Nov 2016, 21:26
- Forum: ESP Easy: General Discussion
- Topic: MQTT Import
- Replies: 50
- Views: 72523
Re: MQTT Import
Hello,
Unfortunately I still have my problem.
Could someone help me to send a text with mqtt to the display?
Thanks
Unfortunately I still have my problem.
Could someone help me to send a text with mqtt to the display?
Thanks
- 12 Nov 2016, 23:35
- Forum: ESP Easy: Software
- Topic: Newbie Rules Question
- Replies: 7
- Views: 6608
Re: Newbie Rules Question
https://github.com/ESP8266nu/ESPEasyPlu ... Import.inoStephenF wrote:Several posts showing you cannot subscribe to MQTT published data on ESPEasy. ......
endon
- 07 Nov 2016, 23:01
- Forum: Experimental
- Topic: Arduino Easy 2560
- Replies: 130
- Views: 187135
Re: Arduino Easy 2560
Ohhhh, i have also two old 2560 with ethernet shield...
And i like the concept and gui from the espeasy very much!
Please, can you share the experimental files?
...maybe i can switch 2 or 3 gpio for relays only.....
regards Tom
And i like the concept and gui from the espeasy very much!
Please, can you share the experimental files?
...maybe i can switch 2 or 3 gpio for relays only.....
regards Tom
- 03 Nov 2016, 22:44
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 710915
Re: New ESP gadget
I can only confirm that I have no issues with the 5 pin Sonoff with the RF module (i don't use RF in the moment....)
It works fine!
R142
It works fine!
R142
- 02 Nov 2016, 17:19
- Forum: ESP Easy: Software
- Topic: Openhab MQTT not set switch
- Replies: 1
- Views: 2912
Re: Openhab MQTT not set switch
Hi,
can you tesing 3 things?
-whats with gipio direktly: mqtt="<[mosquitto:/newdevice/gpio/2:state:MAP(onoff.map)],
-do you use the right openhab, ip and user/password at the config-site?
-whats with Tools/command: publish /newdevice/gpio/2,1?
regards Tim
can you tesing 3 things?
-whats with gipio direktly: mqtt="<[mosquitto:/newdevice/gpio/2:state:MAP(onoff.map)],
-do you use the right openhab, ip and user/password at the config-site?
-whats with Tools/command: publish /newdevice/gpio/2,1?
regards Tim
- 02 Nov 2016, 07:33
- Forum: ESP Easy: Hardware
- Topic: gizwits board - anybody has one?
- Replies: 16
- Views: 13063
Re: gizwits board - anybody has one?
I had the same problem, it was only the power....BertB wrote:Are you sure power is ok?
If so, I think i'd try the oldest stable version First.
- 28 Oct 2016, 10:30
- Forum: ESP Easy: Software
- Topic: Newbie Rules Question
- Replies: 7
- Views: 6608
Re: Newbie Rules Question
on <event> dosmathur wrote: ..MQTT message "/ESP1/aaa/bbb 1".
What is the event syntax in ESPEasy Rules that I need for the above message?
publish /ESP1/aaa/bbb,1
endon
- 27 Oct 2016, 11:13
- Forum: ESP Easy: Projects / Applications
- Topic: Wifi Candle - illuminate with ESPEasy (WS2812)
- Replies: 94
- Views: 161960
Re: Wifi Candle - illuminate with ESPEasy (WS2812)
I uploaded my basic test plugin for neopixel in the playground: https://github.com/ESP8266nu/ESPEasyPluginPlayground/blob/master/_P122_NeoPixel.ino Use rules commands to control single WS2812 leds into any color: neoPixel <led nr>,<red>,<green>,<blue> Who can change the code to use it with mqtt? it...
- 26 Oct 2016, 22:36
- Forum: ESP Easy: Software
- Topic: Rules examples
- Replies: 41
- Views: 70259
Re: Rules examples
ohh.... thanks!iron wrote:The "not so obvious" part is that you have to declare that gpio as an input switch.
Check this thread :
http://www.esp8266.nu/forum/viewtopic.php?f=6&t=2039
an other question:
timerSet,1,random(120,600) possible???
- 26 Oct 2016, 20:23
- Forum: ESP Easy: Projects / Applications
- Topic: Wifi Candle - illuminate with ESPEasy (WS2812)
- Replies: 94
- Views: 161960
Re: Wifi Candle - illuminate with ESPEasy (WS2812)
Hello,
thank you very much, great work moelski!!!
I tested it, is works stabil!
Martinus your plugin is also fine - 123 rules and voala "strandtest"
https://youtu.be/Sir6EZxYMpc
Thanks
thank you very much, great work moelski!!!
I tested it, is works stabil!
Martinus your plugin is also fine - 123 rules and voala "strandtest"
https://youtu.be/Sir6EZxYMpc
Thanks
- 25 Oct 2016, 20:59
- Forum: ESP Easy: Software
- Topic: Actuating Relays via http: Security implications?
- Replies: 1
- Views: 2641
Re: Actuating Relays via http: Security implications?
Hello,
do you find a way to switch your gpio from a protected easyesp? dont work
Thanks
do you find a way to switch your gpio from a protected easyesp?
Code: Select all
http:// admin:admin@ <ESP IP address>/control?cmd=GPIO,<pin>,1.
Thanks
- 22 Oct 2016, 19:11
- Forum: ESP Easy: Software
- Topic: Rules examples
- Replies: 41
- Views: 70259
gpio in rules?
Hi,
how can i make a rule with gpios?
on gpio,2#state = 1 do // ?????
......
endon
how can i make a rule with gpios?
on gpio,2#state = 1 do // ?????
......
endon
- 20 Oct 2016, 15:59
- Forum: ESP Easy: Projects / Applications
- Topic: Wifi Candle - illuminate with ESPEasy (WS2812)
- Replies: 94
- Views: 161960
- 20 Oct 2016, 09:07
- Forum: ESP Easy: Software
- Topic: Wiki update Arduino IDE tutorial
- Replies: 2
- Views: 2695
Re: Wiki update Arduino IDE tutorial
Hello,
I ve got a ESP-07 with 1024Flash
What is the "right" SPIFFS size at Arduino 1.6.12? (1M 64k-512k SPIFFS ?)
Thanks
I ve got a ESP-07 with 1024Flash
What is the "right" SPIFFS size at Arduino 1.6.12? (1M 64k-512k SPIFFS ?)
Thanks
- 19 Oct 2016, 23:31
- Forum: ESP Easy: Software
- Topic: simple button page?
- Replies: 0
- Views: 2096
simple button page?
Is it possible to integrate a simple button page? I have 2 wifinetworks without server and i toggle still with http://ip/tools?cmd=gpio,5,0 it should be nice easier clearer to have a own espeasy-site... 2 or 4 buttons are enough, perhaps a seperatly page at the top :roll: :roll: :roll: ? maybe with ...
- 16 Oct 2016, 11:53
- Forum: ESP Easy: Software
- Topic: MLX90614 on a display
- Replies: 3
- Views: 3091
Re: MLX90614 on a display
... take/change the name and values without space:
[BBQ_SENSOR#Temperature] C
[BBQ_SENSOR#Temperature] C
- 16 Oct 2016, 00:51
- Forum: ESP Easy: Projects / Applications
- Topic: Wifi Candle - illuminate with ESPEasy (WS2812)
- Replies: 94
- Views: 161960
Re: Wifi Candle - illuminate with ESPEasy (WS2812)
- where can i find a link to the ino?
How do you wired the strips?
Can i use the ino for a ring of 16led?
Thank you in anticipation!
How do you wired the strips?
Can i use the ino for a ring of 16led?
Thank you in anticipation!
- 16 Oct 2016, 00:44
- Forum: ESP Easy: General Discussion
- Topic: Logging Data to an SD card
- Replies: 19
- Views: 21184
Re: Logging Data to an SD card
no, the best way for me, file download from ESPEasy somewaymoelski wrote: Where do you want to read a file? In ESPEasy?
For which reason?
why? - because i can't remove my sd-card - its in a case...
Thanks
- 15 Oct 2016, 19:01
- Forum: ESP Easy: General Discussion
- Topic: Logging Data to an SD card
- Replies: 19
- Views: 21184
Re: Logging Data to an SD card
... for me nearly perfect in a standalone network without openhab!
I use the wemos mini with sdboard...
perhaps a possibility to reading the files?
Thanks al lot
I use the wemos mini with sdboard...
perhaps a possibility to reading the files?
Thanks al lot
- 12 Oct 2016, 21:32
- Forum: ESP Easy: Projects / Applications
- Topic: ESP8266 based WordClock
- Replies: 4
- Views: 6759
Re: ESP8266 based WordClock
Hello,
... christmas is coming
How can "i" modify your script that we send with mqtt or/and http different sequences to a ring or stripe (WS2812)
maybe
on/off, brightness, color, rainbow ...
Who can help?
... christmas is coming
How can "i" modify your script that we send with mqtt or/and http different sequences to a ring or stripe (WS2812)
maybe
on/off, brightness, color, rainbow ...
Who can help?
- 07 Oct 2016, 01:01
- Forum: ESP Easy: General Discussion
- Topic: Logging Data to an SD card
- Replies: 19
- Views: 21184
Re: Logging Data to an SD card
cool!
maybe file save or sendto....
maybe file save or sendto....
- 30 Sep 2016, 15:07
- Forum: ESP Easy: Hardware
- Topic: New ESP Device found - ESP8266 WiFi Relay V3.1
- Replies: 3
- Views: 5847
Re: New ESP Device found - ESP8266 WiFi Relay V3.1
Is the Flash Size 512/1024 or 4096?
- 25 Sep 2016, 23:23
- Forum: ESP Easy: Software
- Topic: Push button?
- Replies: 0
- Views: 1991
Push button?
Hello,
How can I realize a push button?
Or is this the the same problem like on a rotary?
Thanks
How can I realize a push button?
Or is this the the same problem like on a rotary?
Thanks
- 25 Sep 2016, 01:19
- Forum: ESP Easy: Software
- Topic: HX711
- Replies: 5
- Views: 6050
Re: HX711
... a good description and library for a load cell
http://blog.squix.org/2016/07/esp8266-t ... art-1.html
http://blog.squix.org/2016/07/esp8266-t ... art-1.html
- 11 Sep 2016, 15:42
- Forum: ESP Easy: General Discussion
- Topic: OLED Scrolling Display
- Replies: 122
- Views: 176074
Re: OLED Scrolling Display
... a litte bug:
If you use the same topic twice or 3 time - the oled show nothing
(i use openhab mqtt - R131, frameOled v0.4)
-----
Line 1: [sys#wifi]
Line 2: [sys#uptime]
Line 3: [sys#freeram]
If you use the same topic twice or 3 time - the oled show nothing
(i use openhab mqtt - R131, frameOled v0.4)
-----
Line 1: [sys#wifi]
Line 2: [sys#uptime]
Line 3: [sys#freeram]
- 09 Sep 2016, 21:42
- Forum: ESP Easy: Software
- Topic: simple logger with google api possible?
- Replies: 0
- Views: 1758
simple logger with google api possible?
... as a example for a 24h logger with google api
https://blog.thesen.eu/wlan-lufttempera ... r-esp8266/
https://developers.google.com/chart
https://developers.google.com/chart/int ... lery/gauge
https://blog.thesen.eu/wlan-lufttempera ... r-esp8266/
https://developers.google.com/chart
https://developers.google.com/chart/int ... lery/gauge
- 06 Sep 2016, 23:26
- Forum: ESP Easy: Software
- Topic: HX711
- Replies: 5
- Views: 6050
Re: HX711
+1 from me too
- 25 Aug 2016, 10:06
- Forum: ESP Easy: General Discussion
- Topic: Reliability, Wifi & Mesh Network ...
- Replies: 8
- Views: 19714
Re: Reliability, Wifi & Mesh Network ...
:o where can i find the libraries to testing the demoToy.ino (neopixel)? easyWebSocket.h easyWebServer.h P.S. - i found it at your github... and it works :), but not stabil - i will it testing longer --- yes it works stabil. Is there a posibility to get out the: wifilevel connection time and is it p...
- 24 Aug 2016, 00:06
- Forum: ESP Easy: General Discussion
- Topic: SOLVED (since r111) BUG -> RFID-ID different in RULES vs. MQTT
- Replies: 11
- Views: 11552
Re: SOLVED (since r111) BUG -> RFID-ID different in RULES vs. MQTT
Yes it is my problem...